• Energy Research
• Closed Access close
• Open Source close
• CN close
• US close

Abstract The purpose of this paper is to investigate the influence of blending methods on the co-gasification of petroleum coke and lignite with CO 2 using a thermogravimetric system at 0.1 MPa. The weight loss curves, XRD analysis, SEM images, BET specific surface area, were investigated. It was observed that petroleum coke shows a low reactivity because of the graphitic carbon structure, low catalyst content and small specific surface area. Blending with lignite can get a high reactivity. The co-gasification reactivity was significantly influenced by blending methods. Wet grinding is much effective than dry grinding. Long grinding time made lignite show greater BET specific area. And the sample in long grinding time has more association chances between petroleum coke and AAEM species. The co-gasification reactivity increases linearly with a rise of BET specific area.

Poria cocos (Schw.) Wolf, an important medicinal and food fungus, is well known in East Asia. Due to growing market demand, long cultivation period, and consumption of pine trunk during cultivation, developing alternative methods for producing P. cocos and/or its active components is of interest. In the present study, the effects of different culture methods on biomass and accumulation of four triterpenoids were investigated. The ethanol extract of fermented mycelium (EFM) was orally administered to rats. Urine output and concentrations of electrolytes (Na+, K+, and Cl-) were measured. Our results showed that mycelia grew better under continuous shaking culture condition (7.5 g DW·L-1), and higher triterpenoid levels were accumulated in two-stage culture (112 mg·L-1, 2.03%). The optimal starting time of static culture for triterpenoid yield was 4th d after shaking culture. Single administration of middle and high dose of EFM significantly increased urine output, Na+ and Cl- excretion, and Na+/K+ ratio. These results suggested that ethanol extract of cultured mycelia showed significant diuretic activity in rats and two-stage culture of P. cocos could be an alternative way to produce mycelia and triterpenoids.

Abstract This paper summarises studies undertaken towards the development of a laminated composite aluminium/hexadecane phase change material (PCM) drywall based on previous analytical work. The study also covered the selection and testing of various types of adhesive materials and identified Polyvinyl acetate (PVA) material as a suitable bonding material. For the purpose of comparison pure hexadecane and composite aluminium/hexadecane samples were developed and tested. The test results revealed faster thermal response by the aluminium/hexadecane sample regarding the rate of heat flux and also achieved about 10% and 15% heat transfer enhancements during the charging and discharging periods respectively. Its measured effective thermal conductivity also increased remarkably to 1.25 W/mK as compared with 0.15 W/mK for pure hexadecane. However there was about 5% less total cumulative thermal energy discharged at the end of the test which indicates that its effective thermal capacity was reduced by the presence of the aluminium particles. The study has shown that some of the scientific and technical barriers associated with the development of laminated composite PCM drywall systems can be overcome but further investigations of effects of adhesive materials are needed.

Abstract Egg yolk-derived P and N dual doped nano carbon capsules (PNCCs) have been synthesized and used as lithium ion battery anodes. The application of egg yolk as the carbon source is a new and environmental-friendly approach for biomass recycling. The reversible capacity of half cells made of PNCCs is as high as ~770 mA h g−1 at a current density of 0.5 A g−1 with considerable rate capacity and cycling stability. PNCCs show a capsule-like structure, which provide extra edges and active sites for lithium intercalation. The heteroatom doping also introduce defects and disorder, which increases the electrochemical activity and creates more active sites for lithium insertion.

This study aims to introduce, conceptualize, and design a novel biomass/gasification-driven hybrid energy configuration. The proposed hybrid configuration has four subsystems: reformer solid oxide fuel cell (RSOFC), biomass/gasification, homogeneous charge compression ignition engine (HCCIE) plus waste heat recovery system (WHRS). RSOFC and HCCIE systems are embedded to generate electric energy. The syngas required for these two subsystems is captured from the biomass/gasification subsystem. In addition to generating electrical energy, fuel cell is responsible for providing combustible fuel to the HCCIE subsystem. The embedded engine in the system can improve the proposed configuration efficiency by increasing the rate of electrical energy production. In addition, the dissipated heat of fuel cell and engine subsystems is recovered by WHRS. The proposed energy configuration is evaluated and discussed from energetically, exergetically and exergoeconomic and environmental aspects to obtain a comprehensive feasibility study of the plant. The offered hybrid design has new component's structure and relationships that have not been reported in the publications. The analysis indicated that the proposed hybrid configuration is capable of generating approximately 1100 kW and 366.3 W of electric and thermal power, respectively, with the overall energetic and exergetic efficiencies of 69.4% and 52.1%. Exergoeconomic analysis results revealed that the specific fuel cost of the total proposed configuration was approximately 1.96 USD per GJ. In addition, compared to a coal and petroleum oil-based power generation plants, the proposed hybrid configuration can have approximately 2.75-fold and 97.7% lower CO2 emissions, sequentially. Besides, the proposed system can rival other similar biomass-driven designs.

Ni3Mo3C was prepared by a modified organic colloid method and explored as anode catalyst for high-performance microbial fuel cell (MFC) based on Klebsiella pneumoniae (K. pneumoniae). The prepared sample was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and Brunauer-Emmett-Teller (BET). The activity of the sample as anode catalyst for MFC based on K. pneumoniae was investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and polarization curve measurement. The results show that the adding of nickel in Mo2C increases the BET surface area of Mo2C and improves the electrocatalytic activity of Mo2C towards the oxidation of microbial fermentation products. The power density of MFC with 3 mg cm(-2) Ni3Mo3C anode is far higher than that of the MFC with carbon felt as anode without any catalyst, which is 19 % higher than that of Mo2C anode and produced 62 % as much as that of Pt anode, indicating that Ni3Mo3C is comparative to noble metal platinum as anode electrocatalyst for MFCs by increasing the loading.

Recycling of anaerobically-digested thin stillage within a corn-ethanol plant may result in the accumulation of nutrients of environmental concern in animal feed coproducts and inhibitory organic materials in the fermentation tank. Our focus is on anaerobic digestion of treated (centrifugation and lime addition) thin stillage. Suitability of digestate from anaerobic treatment for reuse as process water was also investigated. Experiments conducted at various inoculum-to-substrate ratios (ISRs) revealed that alkalinity is a critical parameter limiting digestibility of thin stillage. An ISR level of 2 appeared optimal based on high biogas production level (763 mL biogas/g volatile solids added) and organic matter removal (80.6% COD removal). The digester supernatant at this ISR level was found to contain both organic and inorganic constituents at levels that would cause no inhibition to ethanol fermentation. Anaerobic digestion of treated-thin stillage can be expected to improve the water and energy efficiencies of dry grind corn-ethanol plants.

Abstract Natural gas has been promoted as a ‘‘bridge’’ fuel toward a low-carbon future by offering near-term emissions reductions at lower cost. Existing literature is inconclusive on the short-term emissions benefits of more abundant natural gas. The long-lived nature of natural gas infrastructure also threatens to lock in emissions levels well above longer-term targets. If natural gas can offer short-to-medium term benefits, how much of a bridge should we build? Using ARTIMAS, a foresighted computable general equilibrium model of the US economy, we interact scenarios developed by the EMF-34 study group related to abundant natural gas, low-cost renewables, and a carbon tax to examine the role of natural gas in a carbon-constrained future. We find that abundant natural gas alone does not have a significant impact on CO2 emissions. We also find that, under a higher carbon tax, natural gas investment of approximately $10 billion per year declines to zero at a tax of about $40/ton and existing natural gas assets face significant risk of impairment. Last, the presence of abundant natural gas lowers the marginal welfare cost of abating small amounts of CO2 but is likely to raise the cost of abatement levels consistent with common climate objectives. The integrated welfare costs of climate policy depend on how much abatement we must undertake.

In this study, the effect of recycling the non-condensable gases (NCG) in the catalytic pyrolysis of hybrid poplar using FCC catalyst was investigated. A 50mm bench scale fluidized bed reactor at 475°C with a weight hourly space velocity (WHSV) of 2h(-1) and a gas recycling capability was used for the studies. Model fluidizing gas mixtures of CO/N(2), CO(2)/N(2), CO/CO(2)/N(2) and H(2)/N(2) were used to determine their independent effects. Recycling of the NCG in the process was found to potentially increase the liquid yield and decrease char/coke yield. The model fluidizing gases increased the liquid yield and the CO(2)/N(2) fluidizing gas had the lowest char/coke yield. The (13)C-NMR analysis showed that recycling of NCG increases the aromatic fractions and decreases the methoxy, carboxylic and sugar fractions. Recycling of NCG increased the higher heating value and the pH of the bio-oil as well as decreased the viscosity and density.