• Energy Research
• 12. Responsible consumption close
• 6. Clean water close
• 15. Life on land close
• CN close
• US close
• Energies close

Recycled polylactic acid (PLAr) was reinforced with treated nanocellulosic hemp fibers for biocomposite fabrication. Cellulosic fibers were extracted from hemp fibers chemically and treated enzymatically. Treated nanocellulosic fibers (NCF) were analyzed by Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Biocomposite fabrication was done with PLAr and three concentrations of treated NCF (0.1%, 0.25%, and 1% (v/v)) and then studied for thermal stability and mechanical properties. Increased thermal stability was observed with increasing NCF concentrations. The highest value for Young’s modulus was for PLAr + 0.25% (v/v) NCF (250.28 ± 5.47 MPa), which was significantly increased compared to PLAr (p = 0.022). There was a significant decrease in the tensile stress at break point for PLAr + 0.25% (v/v) NCF and PLAr + 1% (v/v) NCF as compared to control (p = 0.006 and 0.002, respectively). No significant difference was observed between treatments for tensile stress at yield.

The U.S. Environmental Protection Agency’s (EPA) Superfund—the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) database—has collected and built an open-source database based on nearly 2000 US soil remediation cases since 1980, providing detailed information and references for researchers worldwide to carry out remediation work. However, the cases were relatively independent to each other, so the whole database lacks systematicness and instructiveness to some extent. In this study, the basic features of all 144 soil remediation projects in four major oil-producing states (California, Texas, Oklahoma and Alaska) were extracted from the CERCLA database and the correlations among the pollutant species, pollutant site characteristics and selection of remediation methods were analyzed using traditional and machine learning techniques. The Decision Tree Classifier was selected as the machine learning model. The results showed that the growth of new contaminated sites has slowed down in recent years; physical remediation was the most commonly used method, and the probability of its application is more than 80%. The presence of benzene, toluene, ethylbenzene and xylene (BTEX) substances and the geographical location of the site were the two most influential factors in the choice of remediation method for a specific site; the maximum weights of these two features reaches 0.304 and 0.288.

The importance and urgency of energy efficiency in sustainable development are increasing. Accurate assessment of energy efficiency is of considerable significance and necessity. The data envelopment analysis (DEA) method has been widely used to study energy efficiency as a total factor efficiency assessment method. In order to summarize the latest research on DEA in the field of energy efficiency, this article first analyzes the overall situation of related literature published in 2011–2019. Subsequently, the definition, measurement and evaluation variables of energy efficiency are introduced. After that, this article reviews the current DEA model and its extension models and applications based on different scenarios. Finally, considering the shortcomings of the existing DEA model, possible future research topics are proposed.

The electromagnetic vibration caused by electromagnetic force on the stator has threatened large hydro generators operating safely and stably. At the Zhexi hydropower station, the hydro generator was beset by electromagnetic vibration for a long time. Therefore, the paper provided a new method to help to find the vibration source and detect the hydro generator fault, through the combination of simulation and experiments. In this paper, the 3D stator pack structure model and the 2D hydro generator electromagnetic models under rotor eccentricity and rotor ellipse deformation conditions were built. Then, electromagnetism simulations were conducted to study the characteristics of the electromagnetic flux and electromagnetic force under different conditions by using the finite element method (FEM). Lastly, the vibration testing experiments and harmonic response simulations of stator frame were performed to present the characteristics of vibration distribution in frequency conditions. The simulation results were compared with the generator measured data to try to find out the main vibration source and guide the overhaul.

This study aims to overview the U.S. sustainable development by measuring the environmental performance of 50 states over the period of 2009–2018. To attain the objective, we employ data envelopment analysis for environmental assessment where we prioritize the minimization of CO2 emissions first and the maximization of gross state product later under the concept of managerial disposability (i.e., an environment-based performance measure). Then, we examine how the state-level environmental performance measures are associated with their political and spatial contexts. For the purpose, we conduct the Kruskal-Wallis rank sum test across groups of states characterized by their political transitions in the presidential and gubernatorial elections and defined by the regions of the U.S. Economic Development Administration and Environmental Protection Agency. Based on our empirical results, we find that (a) overall environmental performance has gradually enhanced over time, (b) there are statistically significant differences in the environmental performance measures along with the political transitions, and (c) states on both coasts have outperformed those of the middle in the measurement.

In order to evaluate the displacement effect of four kinds of injection media in tight oil sandstone, water, active water, CO2, N2 flooding experiments were carried out in laboratory. Online Nuclear Magnetic Resonance (NMR) spectrometers combine the advantages of NMR technology and core displacement experiments. In the displacement experiment, NMR data of different injection volumes were obtained and magnetic resonance imaging (MRI) was carried out. The results showed that micro and sub-micropores provided 62–97% of the produced crude oil. The enhanced oil recovery ratio of active water flooding was higher than that of conventional water flooding up to 10%. The recovery ratio of gas flooding in micro and sub-micropores was 60–70% higher than that of water flooding. The recovery ratio of CO2 flooding was 10% higher than that of N2 flooding. The remaining oil was mainly distributed in pores larger than 0.1 μm. Under the same permeability level, the remaining oil saturation of cores after gas flooding was 10–25% lower than water flooding. From MRI images, the displacement effects from good to bad were as follows: CO2 flooding, N2 flooding, active water flooding, and conventional water flooding.

Analysis of the change of overall energy efficiency performance of an energy system is a fundamental work for the energy-saving policymaking. However, previous studies seldom focus on energy stages from useful energy to final service, while most attention are paid on stages from energy source to useful energy. In this paper, we develop a high-resolution the Societal Exergy Analysis and Logarithmic Mean Divisia Index (SEA-LMDI) method to analysis changes and driving factors of the aggregate exergy efficiency, in which the boundary of the SEA is extended to passive systems and final services, and a LMDI decomposition method is developed to quantify contributions of efficiency factors and structure factors of all six stages on the aggregate exergy efficiency. A case study of China during 2005–2015 reveals that: (a) the aggregate exergy efficiency from energy source to final service is only from 3.7% to 4.8% during 2005–2015, showing a huge theoretical potential of efficiency improvement. (b) Large passive losses are identified in passive systems and nearly 2/3 of useful energy can be theoretically saved by improving passive systems. (c) Deep analysis of industrial coal-fired boilers indicates that the internal structural adjustments are also important for the aggregate improvement.