• Energy Research
• physical sciences close
• 13. Climate action close
• 12. Responsible consumption close
• 14. Life underwater close
• CN close

Abstract Many organizations in the world are interested in waste management problems and their potential solutions. In order to solve these problems, a Japanese venture company has developed an innovative thermal decomposer for organic wastes called ERCM (Earth-Resource-Ceramic-Machine). The ERCM reactor employs electron injected air to promote the thermal decomposition reaction, while the effect of electron injection into air has not yet been clarified. An experimental work was performed using a fixed bed reactor to explore the effects of different parameters of electron injection into air, the reaction temperature and different feedstock on the syngas generation. The main purpose of this study is to clarify the phenomena occurring in the ERCM reactor where a direct current electric field is produced in the flame reaction zone to enhance the thermal decomposition of wastes. In this regard, a mathematical model for simulating the thermal decomposition of solid waste in the presence of an electric field have been developed. The equations of aero-thermochemistry are coupled to the balance equations for densities of charged species, and the Poisson equation for the electrical potential is solved. The model was validated by the experimental data and showed a good agreement. The results showed that the electric field significantly improves the stabilization of the flame. From the release behavior of CO and CO2, it is noted that the electron injection would affect the char combustion process significantly. Finally the effect of the flame reaction zone generated by the field induced ion wind on the thermal decomposition was investigated.

AbstractEnergy is the biggest crisis to humanity in the future. Nowadays, most of the energy used on earth comes from oil, gas and coal. According to the recent exploring and consuming rates, the energy will be exhausted in 50-100 years. Whether we can solve the crisis is closely related to the survival of humanity on the earth. The irradiation from the sun is the biggest energy source. Building PV power plant to utilize the energy from sun will be an only way to sustain the life cycle on the earth. However, the development of PV power plants require the huge supply of PV cell and the fabrication process may bring a quantity of pollution and waste, which is harmful to the environment. On the other hand, super large PV power plant will occupy huge land. If the land cannot be explored and used reasonably, this will not benefit the human life either. In this article, we address the discussions about the above problems and propose the initial suggestions about development trend of PV industry and the safety operation mode of super PV power plant.

AbstractUsing a low supply water temperature in heating conditions and a high water temperature during cooling can increase energy efficiency, use renewable energy sources, and provide a comfortable and healthy indoor climate. High temperature cooling and low temperature heating is achieved by reducing temperature difference in heat trans er and energy transportation process. The losses in temperature difference can be classified into three types: by heat/moisture exchange; by energy transportation through air/water circulation; by indoor terminal that releases heat/cooling to indoor condit oned space. The air handling process of HVAC system and indoor terminals are the key factor of reducing temperature differen e.Aiming at the losses in HVAC system, Annex 59, titled High Temperature Cooling & Low Temperature Heating in Buildings, is a new international cooperative work under the framework of International Energy Agency (IEA) Energy in Buildings and Communities (EBC). This paper introduc s the background, scope, objective, structure and deliverables of Annex 59. Annex 59 will try to present a new perspective and a new concept to analyze HVAC system in buildings. The goal of the Annex is to build up new concept of analyzing HVAC system from the perspective of reducing mixture loss and transfer loss and th n apply it in high temperature cooling and low temperature heating system.

Accurate estimation of extreme wave conditions is critical for offshore renewable energy activities and applications. Wave power is the transport of energy by wind waves, and the capture of that energy to do useful work. Wave energy converter (WEC) devices are designed to sustain the wave-induced loads that they experience during both operational and survival sea states. The extreme values of these forces are often a key cost driver for WEC designs. These extreme loads often occur during severe storms; therefore careful examination of harsh wave conditions during the device design process is needed. Consequently the development of a specific extreme condition modeling method is essential. This paper presents a novel method for estimating extreme wave statistics, based on the hourly measured wave height maxima at the location of interest. Wave measurements, analyzed in this paper, were collected at SEM-REV offshore sea station located near the coast of France, during years 2001–2010. Note that applied statistical methodology is general and can be well applied to a measured WEC response, and its technology risk assessment. Accurate estimation of extreme wave conditions is critical for offshore renewable energy activities and applications. SEM-REV is known French wave energy test site. The method, referred to as ACER method, is presented in brief detail. ACER method provides an accurate extreme value prediction, utilizing available data efficiently. In this study the estimated return level values, obtained by ACER method, are compared to the corresponding return level values obtained by Gumbel method. Based on the overall performance of the proposed method, it is concluded that the ACER method can provide a robust and accurate prediction of extreme wave height at a given location.

Diesel engine exhaust pipes are in a high-temperature and high-oxygen environment; the carbon soot formed by fuel combustion will be partially oxidized, and its physicochemical properties will change significantly after oxidation. In order to study the effect law of partial oxidation on carbon soot particles emitted from automobiles, commercial carbon black samples (Printex-U carbon) were selected to replace actual carbon soot particles in this paper, and experiments were conducted on a fixed-bed catalytic oxidation device to obtain carbon soot particles with four oxidation rates by varying the time duration of oxygen introduction. Subsequently, the microstructure images of the corresponding carbon soot particles were obtained using TEM and measured after image processing with ImageJ software. The results showed that the average particle size, particle layer spacing, and distortion of carbon soot particles gradually decreased with the increase in oxidation rate. Moreover, the basic particle edge structure of carbon soot particles gradually blurred, the disordered structure inside the carbon soot particles increased, and the structure was destroyed or oxidized away with the gradual oxidation of the outer layer. Lastly, the density degree inside the particles gradually increased, the outer carbon layer arrangement became more regular, and the graphitization degree gradually became larger. The oxidation of carbon soot particles followed the contraction model and the internal oxidation model.

Simultaneous control of transient heat load induced by large-amplitude edge-localized modes (ELMs) and steady-state heat load on divertor targets under metal wall environment is crucial for steady-state operation of future tokamak fusion reactors, such as ITER and the China Fusion Engineering Test Reactor (CFETR). In the recent experiments, sustained partial energy detachment without confinement degradation has been achieved in the Experimental Advanced Superconducting Tokamak (EAST) in high-performance grassy-ELM H-mode with q95 ~ 5.9 by a newly developed detachment feedback control scheme, in which we first used electron temperature (Tet) measured by divertor Langmuir probes to identify the onset of energy detachment, and then the system switched to the feedback control of total radiation power measured by absolute extreme ultraviolet (AXUV) system. Tet around the upper outer strike point was successfully maintained less than 8 eV with seeding of 80% Ne and 20% D2 mixture from upper outer divertor, and the total radiation power was maintained ~1.4 MW, around 52% of injected power. There was no significant decrease of the plasma stored energy and H98,y2 factor (~1) over the entire detachment feedback control process. These experiment results demonstrate good compatibility of the high-performance grassy-ELM regime with radiative divertor. In order to confirm the compatibility in a wider range, stable partial energy detachment in grassy-ELM H-mode with relatively lower q95 (~5.4) was also achieved in EAST through the newly developed integrated-feedback-control technique. The new detachment feedback control without confinement degradation in grassy-ELM H-mode provides a candidate mode for EAST long-pulse operation in the future with well control of ELM-induced transient and steady heat fluxes on the divertor target.

Abstract The Serpens Molecular Cloud is one of the most active star-forming regions within 500 pc, with over 1000 young stellar objects (YSOs) at different evolutionary stages. The ages of the member stars inform us about the star formation history of the cloud. In this paper, we develop a spectral energy distribution (SED) fitting method for nearby evolved (diskless) young stars from members of the Pleiades to estimate their ages, with a temperature scale adopted from APOGEE spectra. When compared with literature temperatures of selected YSOs in Orion, the SED fits to cool (<5000 K) stars have temperatures that differ by an average of ≲50 K and have a scatter of ∼210 K for both disk-hosting and diskless stars. We then apply this method to YSOs in the Serpens Molecular Cloud to estimate ages of optical members previously identified from Gaia DR2 astrometry data. The optical members in Serpens are concentrated in different subgroups with ages from ∼4 to ∼22 Myr; the youngest clusters, W40 and Serpens South, are dusty regions that lack enough optical members to be included in this analysis. These ages establish that the Serpens Molecular Cloud has been forming stars for much longer than has been inferred from infrared surveys.

AbstractAn automatic pump is developed using low water‐head hydropower. The energy conversion efficiency η of the gas‐water energy conversion equipment is the focus. In this equipment, low‐head water normally drains to the vertical downcomer. When water particles separate via gravity, a vacuum is generated, and air is mixed into the water spontaneously. High‐pressure gas is ultimately produced at the end of the pipe. To discuss the effects of the air intake pipe diameter, river drop and water flow rate on η, a full‐scale experiment is conducted, and an analytical solution based on the separation of water particles is derived. The air intake pipe diameter has almost no effect on η, but η changes dramatically as the water flow rate varies. Meanwhile, η initially increases and then decreases as the river drop increases. These findings enable the development of a method for low water‐head hydropower utilization.