• Energy Research
• Restricted close
• Open Source close
• Embargo close
• 6. Clean water close
• 9. Industry and infrastructure close
• CN close

In this work, a novel enhanced deep borehole heat exchanger (EDBHE) was proposed to improve heat extraction efficiency based on the jet grouting method. By means of this technology, a soilcrete zone with high thermal conductivity was built near the wellbore. To analyze the feasibility and efficiency of this method, we firstly constructed a validated deep borehole heat exchanger (DBHE) model based on the field experimental data. Numerical simulations were carried out to investigate the 30-year production performance of EDBHE. Results demonstrated that the jet grouting method is an efficient way for improving thermal output of DBHE. It is evaluated that the average annual heat production rate over a 30-year heating period of EDBHE is 463.2 kW, which is 1.27 times as that of DBHE. Sensitivity analyses indicate that the heat production rate and outlet temperature mainly depend on the height and radius of the artificial soilcrete zone. However, thermal output is not sensitive to thermal conductivity of the soilcrete zone due to the higher thermal resistance of the geological formation. For the experimental site used in this work, the recommended height, radius, and thermal conductivity of the soilcrete are 1000 m, 1.0 m, and 50 W/m °C, respectively.

Decreasing nutrient losses from excessive synthetic fertilizer inputs is the direct and valid way to address low nutrient use efficiency and the related environmental consequences. Here, we established a comprehensive database of nitrogen (N), phosphorus (P), and carbon (C) losses from rice paddy fields in China, which we used to evaluate fertilization-induced losses and the impact of environmental factors, and to mitigate losses by adopting alternative fertilization options and setting input thresholds. Our results showed that most N-loss pathways had exponential increases with additional N input. In average, 23.8% of the N applied was lost via NH3 (16.1%), N2O (0.3%), leaching (4.8%), and runoff (2.6%). Total P loss was approximately 2.7% of the input, composed of leaching (1.3%) and runoff (1.4%). C lost as CH4 accounted for 4.9% of the organic C input. A relative importance analysis indicated that climate or soil variation rather than fertilizer rate was the dominant factor driving N and P leaching, and CH4 emissions. Based on the sensitivity of multiple N-loss pathways to N fertilization, we propose upper thresholds for N inputs of 142–191 kg N ha−1 across four rice types, which would avoid dramatic increases in N losses. Compared to conventional chemical fertilization, alternative fertilization options had diverse performances: enhanced-efficiency N fertilizer reduced N loss rate by 7.8 percent points and the global warming potential (GWP, considering N2O and CH4 emissions) by 28.8%; combined manure and chemical N fertilizer reduced N loss rate by 9.0 percent points but increased the GWP by 56.9%; straw return had no effect on total N loss but almost doubled the GWP. Using nutrient sources most appropriate to site-specific conditions is demonstrated as a robust way to decrease nutrient losses. Setting nutrient input thresholds would also contribute to the mitigation of environmental pollution, especially in regions with poor fertilization recommendation systems.

The effect of substrate changes on the performance and microbial community of two-chamber microbial fuel cells (MFCs) was investigated in this study. The MFCs enriched with a single substrate (e.g., acetate, glucose, or butyrate) had different acclimatization capability to substrate changes. The MFC enriched with glucose showed rapid and higher power generation, when glucose was switched with acetate or butyrate. However, the MFC enriched with acetate needed a longer adaptation time for utilizing glucose. Microbial community was also changed when the substrate was changed. Clostridium and Bacilli of phylum Firmicutes were detected in acetate-enriched MFCs after switching to glucose. By contrast, Firmicutes completely disappeared and Geobacter-like species were specifically enriched in glucose-enriched MFCs after feeding acetate to the reactor. This study further suggests that the type of substrate fed to MFC is a very important parameter for reactor performance and microbial community, and significantly affects power generation in MFCs.

This study proposed an efficient way of direct sewage pre-concentration by a combined coagulation microfiltration (CCM) system and an optimal operational strategy of aeration. Compared to two typical technologies for sewage pre-concentration, i.e. direct sewage microfiltration (DSM) and continuous aerated sewage microfiltration (ASM), the CCM system under optimal aeration strategy showed higher concentration efficiency and slower permeability decline (i.e. better control of membrane fouling), and easier collection of retained organic matter (OM). A lab-scale CCM reactor was running continuously for 295 h, and a concentrate of about 16,000 mg COD/L was produced at an average net flux of 13.3 L/(m2 h) and an influent OM recovery of nearly 70%, which was higher than the concentrate produced by a high-loaded membrane bioreactor (MBR) with one day solids retention time. The use of chemical coagulant was found to have little impact on the following anaerobic digestion (AD) process, for anaerobic biodegradability of the concentrate is 56.5% (close to the typical value for blackwater). The integration of the CCM and AD processes could achieve a net energy production of 0.0098 kW h/m3 after deduction of 0.0919 kW h/m3 required for the operation of the CCM system, thus showing promise as an effective OM concentration method for energy recovery from sewage.

Autogenerative high pressure digestion (AHPD) provides an integrated biogas upgrading technology, capable of producing biogas with a CH4 content exceeding 95% at pressures up to 90 bar. Hydrolysis is generally regarded as the rate-limiting step in the anaerobic digestion of complex organic matter, governing the volatile fatty acid (VFA) production rate for subsequent conversion to methane. Starch hydrolysis rates in AHPD systems were studied and the potential risk for VFA accumulation was assessed. Under the anticipated practical moderate pressure conditions at 30 °C, experimental CH4-content of the biogas improved from 49 to 73 ± 2% at atmospheric and elevated pressure, respectively. Furthermore, no significant effect of pressure on the hydrolysis was found. Like under atmospheric pressure, gelatinisation was the rate-limiting step for particulate starch (0.05 d-1) and saccharification for gelatinised starch (0.1 d-1). Because no effect was observed on starch, an effect on the hydrolysis rate of more complex organic matter like (ligno-)cellulose is also not anticipated.

Several Italian and Chinese temperate lakes with soluble reactive phosphorus concentrations  20 μg C L-1 h-1) and could favor the release of inorganic phosphorus. High extracellular enzyme activities and phosphorus solubilizing bacteria abundance in sediments accelerated nutrient regeneration. In these conditions, the positive GLU-AP relationship suggested the coupling of carbon and phosphorus regeneration; an efficient phosphorus regeneration and high nitrogen levels (up to 0.067 and 0.059 mg L-1 NH4 and NO3 in Italy; 0.631 and 1.496 mg L-1 NH4 and NO3 in China) led to chlorophyll a peaks of 14.9 and 258.4 μg L-1 in Italy and China, respectively, and a typical algal composition. Conversely, in the oligo-mesotrophic lakes, very low nitrogen levels (in Italy, 0.001 and 0.005 mg L-1 NH4 and NO3, respectively, versus 0.053 and 0.371 mg L-1 in China) induced high LAP, while low phosphorus (33.6 and 46.3 μg L-1 total P in Italy and China, respectively) led to high AP. In these lakes, nitrogen and phosphorus regeneration were coupled, as shown by positive LAP-AP relationship; however, the nutrient demand could not be completely met without the supply from sediments, due to low enzymatic activity and phosphorus solubilizing bacteria found in this compartment.

The environmental profile of two municipal solid waste incineration (MSWI) technologies with semi-dry flue gas cleaning, namely grated firing incinerators (GFI) and fluidised bed incinerators (FBI) that are commonly used in China were evaluated and compared by life-cycle assessment (LCA) using the EASEWASTE model. All emissions of key pollutants as well as energy, resource and material inputs and outputs associated with the two MSWI technologies were determined and the corresponding environmental impact potentials were modelled. Incineration of MSW with a lower heating value (LHV) around 4.5 MJ kg—1 demands that auxiliary fuel is used, and both GFI and FBI caused environmental loads by contributing with environmental impact potentials in most categories except for some saving in global warming (GW100) and hazardous waste (HW). Coal combustion in FBI is a main contributor to the environmental impact potentials and thus should always be limited to a minimum. Auxiliary fuels can be avoided when the LHV of MSW is higher than 5—6 MJ kg— 1. For all scenarios, GFI saves more global warming potentials than FBI due to its higher net power generation from combustion of MSW itself. Leachate from the bunker could be sprayed into the furnace for evaporation under high temperature, as an alternative to waste-water treatment, without major changes in the environmental profile of the incinerator. The presented evaluations may contribute to a more balanced environmental assessment of the two incineration technologies with respect to incineration of MSW with low heating values as often found in Asia and China.

AbstractThe recent rise in atmospheric methane (CH4) concentrations accelerates climate change and offsets mitigation efforts. Although wetlands are the largest natural CH4 source, estimates of global wetland CH4 emissions vary widely among approaches taken by bottom‐up (BU) process‐based biogeochemical models and top‐down (TD) atmospheric inversion methods. Here, we integrate in situ measurements, multi‐model ensembles, and a machine learning upscaling product into the International Land Model Benchmarking system to examine the relationship between wetland CH4 emission estimates and model performance. We find that using better‐performing models identified by observational constraints reduces the spread of wetland CH4 emission estimates by 62% and 39% for BU‐ and TD‐based approaches, respectively. However, global BU and TD CH4 emission estimate discrepancies increased by about 15% (from 31 to 36 TgCH4 year−1) when the top 20% models were used, although we consider this result moderately uncertain given the unevenly distributed global observations. Our analyses demonstrate that model performance ranking is subject to benchmark selection due to large inter‐site variability, highlighting the importance of expanding coverage of benchmark sites to diverse environmental conditions. We encourage future development of wetland CH4 models to move beyond static benchmarking and focus on evaluating site‐specific and ecosystem‐specific variabilities inferred from observations.