• Energy Research
• Open Access close
• Embargo close
• CZ close
• UA close

This paper reports the generalized results of computer simulation of physical processes at a rotor-disk film evaporating plant. Optimization of the operation mode cannot be achieved without establishing patterns in the course of physical processes. We have proposed a computer model of hydrodynamics that accounts for all the features, initial and boundary conditions. The results of computer simulations make it possible to adequately assess the effectiveness of using a rotor-disk film evaporating plant (RDFVP) for the concentration of heat-labile materials. We have established patterns in the course of physical processes within a structure of RDFVP by using computer simulation of hydrodynamics in the programming environment ANSYS and applying a k-e turbulence model. The result of simulation is the derived velocity fields of the concentrated fluid (w max =0.413 m/s) and the gas phase (w max =8.176 m/s), as well as the magnitude of values for shear stress τ=0.94·10 -6 Pa. It was established that the gas heat-carrier is characterized by the highly-turbulent flows with maximum values for kinetic energy TKE max =8.985·10 -1 m 2 /s 2 . The reliability of results is ensured by the correctness, completeness, and adequacy of physical assumptions when stating the problem and while solving it using the computer aided design system ANSYS. It has been established that the proposed structure is an effective alternative to equipment for the concentration of solutions. The data obtained could be used when designing heat-and-mass-exchange equipment for the highly efficient dehydration of thermolabile materials

The problems of environmental pollution in the conditions of high dust content in the air during the development of coal mines in the territory of the Czech Republic are considered. A mechanism for making managerial decisions was developed using an integrated approach using the new technological process Nastup Tušimice (DNT) aimed at eliminating pollutant emissions and managing workers in dusty conditions in mining operations. The recommendations of active and passive measures aimed at reducing dustiness in the process of coal mining have also been developed.

Bridges in Ukraine are one of the most important components of the infrastructure, requiring attention from government agencies and constant funding. The object of the study was the methodology for quantifying the condition of bridge components. The Artificial Neural Network-based (ANN) tool was developed to quantify the technical condition of bridge components. The literature analysis showed that in most cases the datasets were obtained during the inspection of bridges to solve the problems of assessing the current technical condition. The lack of such a database prompted the creation of a dataset on the basis of the Classification Tables of the Operating Conditions of the Bridge Components (CT). Based on CTs, five datasets were formed to assess the condition of the bridge components: bridge span, bridge deck, pier caps beam, piers and abutments, approaches. The next step of this study was creating, training, validating and testing ANN models. The network with ADAM loss function and softmax activation showed the best results. The optimal values of MAPE and R2 were achieved at the 100th epoch with 64 neurons in the hidden layer and were equal to 0.1% and 0.99998, respectively. The practical application of the ANN models was carried out on the most common type of bridge in Ukraine, namely, a road beam bridge of small length, made of precast concrete. The novelty of this study consists of the development of a tool based on the use of ANN model, and the proposal to modify the methodology for quantifying the condition of bridge components. This will allow minimizing the uncertainties associated with the subjective judgments of experts, as well as increasing the accuracy of the assessment.

Soubor primárnich dat klimatických charakteristik a izotopových poměrů uhlíku v letokruzích dubů podél výškového gradientu v letech 1961-2020. Jedná se o primární výchozí data k publikaci Pernicová et al. (2024) Impacts of elevated CO2 levels and temperature on photosynthesis and stomatal closure along an altitudinal gradient are counteracted by the rising atmospheric vapor pressure deficit, který byl publikován v časopise Science of the Total Environment (https://doi.org/10.1016/j.scitotenv.2024.171173). A primary dataset of climate characteristics and carbon isotopic ratios in oak tree rings along an altitudinal gradient in 1961-2020. This dataset contains primary values used in the publication Pernicová et al. (2024) Impacts of elevated CO2 levels and temperature on photosynthesis and stomatal closure along an altitudinal gradient are counteracted by the rising atmospheric vapor pressure deficit, published in the journal Science of the Total Environment (https://doi.org/10.1016/j.scitotenv.2024.171173).

# Reproductive data Fagus sylvatica: Widespread masting breakdown in beech [https://doi.org/10.5061/dryad.qz612jmps](https://doi.org/10.5061/dryad.qz612jmps) This dataset, used in the Global Change Biology article "Widespread breakdown in masting in European beech due to rising summer temperatures", contains 50 time series of population-level annual reproductive data by European beech (*Fagus sylvatica*, L) across Europe. The dataset builds on the open-access dataset [MASTREE+](https://doi.org/10.1111/gcb.16130), and expands it for European beech. ## Description of the data The dataset column names follow that of MASTREE+. A description of MASTREE+ column names (Modified from Table 1 in the [MASTREE+ article)](https://doi.org/10.1111/gcb.16130): | *Columns* | *Description* | *Contains NA?* | | :-------------------- | :----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | :------------- | | Alpha\_Number | Unique code associated with each original source of data, that is, the publication, report or thesis containing extracted data, or the previously unpublished data set included in MASTREE+. | No | | Segment | Temporal segment of a time-series containing gaps (note that years with no observations are not recorded). Individual timeseries can consist of multiple segments. | No | | Site\_number | Code to differentiate multiple sites from the same original source (Alpha\_Number/Study\_ID). | No | | Variable\_number | Code to differentiate multiple measures of reproductive output from the same species-site combination (e.g. where seeds and cones were recorded separately). | No | | Year | Year of observation. | No | | Species | Species identifier, standardised to The Plant List nomenclature. ‘spp.’ is used to indicate a record identified to the genus level only. ‘MIXED’ indicates a non-species-specific community-level estimate of annual reproductive effort. | No | | Species\_code | Six-character species identifier. | No | | Mono\_Poly | Monocarpic (semelparous) or Polycarpic (iteroparous) species. | No | | Value | The measured value of annual reproductive output. | No | | VarType | Continuous or ordinal data. Continuous time-series are recorded on a continuous scale. Ordinal series are recorded on an ordered categorical scale. All ordinal series are rescaled to start at 1 (lowest reproductive effort) and to contain only integer values. | No | | Max\_value | The unit of measurement, where VarType is continuous (otherwise: NA). | No | | Unit | The maximum value in a time-series. | No | | Variable | Categorical classification of the measured variable. Options limited to: cone, flower, fruit, seed, pollen, total reproduction organs. | No | | Collection\_method | Classification of the method used to measure reproductive effort. Options are limited to: cone count, cone scar count, flower count, fruit count, fruit scar sound, seed count, seed trap, pollen count, lake sediment pollen count, harvest record, visual crop assessment, other quantification, dendrochronological reconstruction. | No | | Latitude | Latitude of the record, in decimal degrees. | No | | Longitude | Longitude of the record, in decimal degrees. | No | | Coordinate\_flag | A flag to indicate the precision of the latitude and longitude. A = coordinates provided in the original source B = coordinates estimated by the compiler based on a map or other location information provided in the original source C = coordinates estimated by the compiler as the approximate centre point of the smallest clearly defined geographical unit provided in the original source (e.g. county, state, island), and potentially of low precision. | No | | Site | A site name or description, based on information in the original source. | No | | Country | The country where the observation was recorded. | No | | Elevation | The elevation of the sample site in metres above sea level, where provided in the original source (otherwise: NA). | Yes | | Spatial\_unit | Categorical classification of spatial scale represented by the record, estimated by the compiler based on information provided in the original source. stand = <100 ha, patch = 100–10,000 ha, region = 10,000–1,000,000 ha, super-region = >1,000,000 ha. | No | | No\_indivs | Either the number of monitored individual plants, or the number of litter traps. NA indicates no information in the original source, and 9999 indicates that while the number of monitored individuals was not specified, the source indicated to the compiler that the sample size was likely ≥10 individuals or litter traps. | No | | Start | The first year of observations for the complete time-series, including all segments. | No | | End | The final year of observations for the complete time-series, including all segments. | No | | Length | The number of years of observations. Note that may not be equal to the number of years between the Start and End of the time-series, due to gaps in the time-series. | No | | Reference | Identification for the original source of the data. | No | | Record\_type | Categorisation of the original source. Peer-reviewed = extracted from peer reviewed literature Grey = extracted from grey literature Unpublished = unpublished data. | No | | ID\_enterer | Identification of the original compiler of the data. AHP, Andrew Hacket-Pain; ES, Eliane Schermer; JVM, Jose Moris; XTT, Tingting Xue; TC, Thomas Caignard; DV, Davide Vecchio; DA, Davide Ascoli; IP, Ian Pearse; JL, Jalene LaMontagne; JVD, Joep van Dormolen. | No | | Date\_entry | Date of data entry into MASTREE+ in the format yyyy-mm-dd. | No | | Note on data location | Notes on the location of the data within the original source, such as page or figure number. If not provided, NA. | Yes | | Comments | Additional comments. If not provided, NA. | Yes | | Study\_ID | Unique code associated with each source of data. M\_ = series extracted from published literature; A\_ = series incorporated from Ascoli et al. (2020), Ascoli, Maringer, et al. (2017) and Ascoli, Vacchiano, et al. (2017); PLK\_ = series incorporated from Pearse et al. (2017); D\_ = unpublished data sets. NA is attributed if no study ID has been previously associated with this time-series in MASTREE+ v.1. | Yes | Note that the new beech reproductive data has been assigned an arbitrary Alpha_Number for the purpose of this study. Future MASTREE+ updates which incorporate this new data may alter the time series ID columns (e.g. Alpha_Number, Site_number, Variable_number). MASTREE+ updates can be found on [GITHUB](https://github.com/JJFoest/MASTREEplus). Climate change effects on tree reproduction are poorly understood even though the resilience of populations relies on sufficient regeneration to balance increasing rates of mortality. Forest-forming tree species often mast, i.e. reproduce through synchronised year-to-year variation in seed production, which improves pollination and reduces seed predation. Recent observations in European beech show, however, that current climate change can dampen interannual variation and synchrony of seed production, and that this masting breakdown drastically reduces the viability of seed crops. Importantly, it is unclear under which conditions masting breakdown occurs, and how widespread breakdown is in this pan-European species. Here, we analysed 50 long-term datasets of population-level seed production, sampled across the distribution of European beech, and identified increasing summer temperatures as the general driver of masting breakdown. Specifically, increases in site-specific mean maximum temperatures during June and July were observed across most of the species range, while the interannual variability of population-level seed production (CVp) decreased. The declines in CVp were greatest where temperatures increased most rapidly. Additionally, the occurrence of crop failures and low-seed years has decreased during the last four decades, signalling altered starvation effects of masting on seed predators. Notably, CVp did not vary among sites according to site mean summer temperature. Instead, masting breakdown occurs in response to warming local temperatures (i.e. increasing relative temperatures), such that the risk is not restricted to populations growing in warm average conditions. As lowered CVp can reduce viable seed production despite the overall increase in seed count, our results warn that a covert mechanism is underway that may hinder the regeneration potential of European beech under climate change, with great potential to alter forest functioning and community dynamics.

The gas chromatography used for detecting antioxidizing additive ionol at transformer oil presence helps to ensure reliable operation of oil-filled electrical equipment. Changes in the ionol preliminary extraction temperature do affect the reliability of measurement result. This study aim consisted in investigating the temperature effect on the value of extraction degree and distribution coefficients for ionol in the system “oil — ionol — ethanol” at extraction temperatures 15...75 °C. The experiment included optimization of gas chromatographic ionol in transformer oil detection conditions using method of ionol ethanol extraction and an estimated equation for a single extraction. Found is that the ionol extraction temperature increase in the range of 15...75 °C reduces the values of the ionol distribution coefficients and increases the value of ionol extraction degree and its concentration in the extract reducing the extraction duration, lowering the value of the detection threshold and the total duration of ionol in transformer oil detection. The recommended values for ionol extraction in the temperature range of 15...32 °C at a temperature of extraction 20 °C with precision temperature Δt ≤ ±1 °C, in the range of 32…40 °C, with a temperature of extraction 36 °C and Δt ≤ ±2 °C, in the range of 40...75 °C, with a temperature of extraction 65 °C and Δt ≤ ±5 °C.

Nail polish, in particular gel nail polish, is the most used cosmetic product. The components of the gel polish, which determine both toxicity and consumer color properties, are pigments. Zn-Al layered double hydroxides intercalated with anionic food dyes are promising pigments for use in gel polish. The parameters of the samples of Orange Yellow S-intercalated Zn-Al (Zn:Al=4:1 and Zn:Al=2:1) hydroxides synthesized at pH=8 and pH=11 were studied. The crystal structure of the samples was studied by X-ray phase analysis and thermogravimetry, and the pigment properties – by the method of measuring and calculating color characteristics in the CIELab and XYZ systems. The color characteristics of gel nail polish samples prepared using synthesized pigments were studied in a similar way. X-ray phase analysis and thermogravimetry showed that Zn-Al-Orange Yellow S pigments synthesized at both Zn:Al ratios and pH were layered double hydroxides with the α-Zn(OH) 2 structure. The phenomenon of the decomposition of Zn-Al LDH to ZnO during the synthesis was revealed. As a result, all Zn-Al-Orange Yellow S pigment samples contained both layered double hydroxide and zinc oxide. It was shown that all samples of the Zn-Al-Orange Yellow S pigment obtained at pH 8 and 11 and the ratios Zn:Al=4:1 and Zn:Al=2:1 had high pigment characteristics and are promising for use in gel polish. The samples of gel nail polish with synthesized pigments have a red-orange color (сolor tone 595–604 nm) with high monochromaticity (color purity 63–75 %) and color saturation (48.7–58.3)

This repository contains the dataset linked to the following publication: Article title: Synergistic effects of warming and internal nutrient loading interfere with the long-term stability of lake restoration and induce sudden re-eutrophication Journal: Environmental Science & Technology DOI: 10.1021/acs.est.2c07181 Abstract: Phosphorus (P) precipitation is among the most effective treatments to mitigate lake eutrophication. However, after a period of high effectiveness, studies have shown possible re-eutrophication and the return of harmful algal blooms. While such abrupt ecological changes were attributed to the internal P loading, the role of lake warming and its potential synergistic effects with internal loading, thus far, has been understudied. Here, in a eutrophic lake in central Germany, we quantified the driving mechanisms of the abrupt re-eutrophication and cyanobacterial blooms in 2016 (30 years after the first P precipitation). A process-based lake ecosystem model (GOTM-WET) was established using a high-frequency monitoring dataset covering contrasting trophic states. Model analyses suggested that the internal P release accounted for 68% of the cyanobacterial biomass proliferation, while lake warming contributed to 32%, including direct effects via promoting growth (18%) and synergistic effects via intensifying internal P loading (14%). The model further showed that the synergy was attributed to prolonged lake hypolimnion warming and oxygen depletion. Our study unravels the substantial role of lake warming in promoting cyanobacterial blooms in re-eutrophicated lakes. The warming effects on cyanobacteria via promoting internal loading need more attention in lake management, particularly for urban lakes. SYNOPSIS: Warming synergistically promotes re-eutrophication with internal nutrient loading and exacerbates cyanobacterial blooms in urban lakes 30 years after phosphorus mitigation. Data description by Xiangzhen Kong (xzkong@niglas.ac.cn), 2023-02-20 ---Wet chemical analysis on water samples taken at five depths (0.5, 2.5, 5.0, 7.0 and 9.0 m) from the deepest point in the lake (BA1) at biweekly intervals from 2018.5-2021.8. File name: BAB_BA1_TN_mgL.obs (total nitrogen concentration) BAB_BA1_NH4_mgL.obs (ammonium nitrogen concentration) BAB_BA1_NO3_mgL.obs (nitrate nitrogen concentration) BAB_BA1_TP_mgL.obs (total phosphorus concentration) BAB_BA1_SRP_mgL.obs (Soluble reactive phosphorus concentration) BAB_BA1_DP_mgL.obs (dissolved P concentration) BAB_BA1_DOC_mgL.obs (Dissolved organic carbon concentration) BAB_BA1_Si_mgL.obs (dissolved silicon concentration) BAB_BA1_Chla_HPLC_DIN_mgL.obs (Chl-a concentration) ---CTD probe profile data from the deepest point in the lake (BA1) from 2017.8 to 2021.8 at biweekly basis with approximately 0.1 m vertical resolution File name: t_prof_file_barleber_ctm644.obs (water temperature) oxy_prof_file_barleber_ctm644 (Dissolved oxygen) turb_prof_file_barleber_ctm644.obs (Turbidity) chla_prof_file_barleber_ctm644.obs (Chl-a concentration) ---BBE probe profile data from the deepest point in the lake (BA1) from 2017.8 to 2021.8 at biweekly basis with approximately 0.1 m vertical resolution File name: totalChla_prof_file_barleber_FP2101.obs (Chl-a concentration) bluegreen_prof_file_barleber_FP2101.obs (Blue-green algae Chl-a concentration) green_prof_file_barleber_FP2101.obs (Green algae Chl-a concentration) diatom_prof_file_barleber_FP2101.obs (Diatom Chl-a concentration)