• Energy Research
• 2021-2025close
• Restricted close
• Open Source close
• DE close
• ES close
• CA close
• AU close

The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system.

Thermokinetics of Biochar production.

Common hornbeam (Carpinus betulus) is one of the most important spring pollen allergens widespread in the Czech Republic. This study evaluates the changes in Carpinus betulus flowering and the length of the blooming period in the Czech Republic during 1991-2020. Temporal and spatial evaluations in the timing of the flowering and the length of the blooming period were investigated at different altitudinal levels. Moreover, the changes in mean air temperature and precipitation total in spring months (March-April-May) were assessed, including the correlation with phenological data. Geographic Information System methods, the Mann-Kendall test and Pearson's correlation coefficient were used for processing. The flowering of Carpinus betulus changed significantly over time during the 1991-2020 period. The linear models predicted early flowering in Carpinus betulus at different altitudes (27 days at > 701 m 18 days at 501-700 m and 13 days at 301-500 m) significantly (p<0.001) over the last three decades. Furthermore, the length of the blooming period of Carpinus betulus has been shortened (4 days) at the 301-500 m a.s.l. altitudinal level significantly (p<0.05). The strongest correlation was predominantly observed between flowering and the mean air temperature (March-April-May).

The determination of minimum free energy pathways (MFEP) is one of the most widely used strategies to study reactive processes. For chemical reactions in complex environments, the combination of quantum mechanics (QM) with a molecular mechanics (MM) representation is usually necessary in a hybrid QM/MM framework. However, even within the QM/MM approximation, the affordable sampling of the phase space is, in general, quite restricted. To reduce drastically the computational cost of the simulations, several methods such as umbrella sampling require performing a priori a selection of a reaction coordinate. The quality of the computed results, in an affordable computational time, is intimately related to the reaction coordinate election which is, in general, a nontrivial task. In this work, we provide an approach to model reactive processes in complex environments that does not require the a priori selection of a reaction coordinate. The proposed methodology combines QM/MM simulations with an extrapolation of the nudged elastic bands (NEB) method to the free energy surface (FENEB). We present and apply our own FENEB scheme to optimize MFEP in different reactive processes, using QM/MM frameworks at semiempirical and density functional theory levels. Our implementation is based on performing the FENEB optimization by uncoupling the optimization of the band in a perpendicular and tangential direction. In each step, a full optimization with the spring force is performed, which guarantees that the images remain evenly distributed. The robustness of the method and the influence of sampling on the quality of the optimized MFEP and its associated free energy barrier are studied. We show that the FENEB method provides a good estimation of the reaction barrier even with relatively short simulation times, supporting that its combination with QM/MM frameworks provides an adequate tool to study chemical processes in complex environments.

AbstractNitrous oxide (N2O) is a potent greenhouse gas and causes stratospheric ozone depletion. While the emissions of N2O from soil are widely recognized, recent research has shown that terrestrial plants may also emit N2O from their leaves under controlled laboratory conditions. However, it is unclear whether foliar N2O emissions are universal across varying plant taxa, what the global significance of foliar N2O emissions is, and how the foliage produces N2O in situ. Here we investigated the abilities of 25 common plant taxa, including trees, shrubs and herbs, to emit N2O under in situ conditions. Using 15N isotopic labeling, we demonstrated that the foliage‐emitted N2O was predominantly derived from nitrate. Moreover, by selectively injecting biocide in conjunction with the isolating and back‐inoculating of endophytes, we demonstrated that the foliar N2O emissions were driven by endophytic bacteria. The seasonal N2O emission rates ranged from 3.2 to 9.2 ng N2O–N g−1 dried foliage h−1. Extrapolating these emission rates to global foliar biomass and plant N uptake, we estimated global foliar N2O emission to be 1.21 and 1.01 Tg N2O–N year−1, respectively. These estimates account for 6%–7% of the current global annual N2O emission of 17 Tg N2O–N year−1, indicating that in situ foliar N2O emission is a universal process for terrestrial plants and contributes significantly to the global N2O inventory. This finding highlights the importance of measuring foliar N2O emissions in future studies to enable the accurate assigning of mechanisms and the development of effective mitigation.

The use of bio-plastic-based packaging as an alternative to conventional plastic packaging is increasing. Among the plethora of different bio-based plastics, the most relevant ones are those that, at the end of their life, can be treated with the organic fraction of municipal solid waste. Even in these cases, their impact on the waste processing and recycling is not always positive. This study aim to assess on a laboratory scale the influence on combined anaerobic digestion and composting industrial processes of a bio-based plastic film, namely cellulose acetate (CA), in pure and modified (additions of additive) forms. CA films were mixed with organic waste and subjected to: (i) anaerobic digestion; (ii) active composting and (iii) two stages of curing composting. Anaerobic digestion and composting were monitored through methane yield and oxygen uptake respectively; additionally, the bio-plastics degree of disintegration was assessed during all the processes. The final disintegration of pure and modified CA was 73.82% and 54.66%, respectively. Anaerobic digestion contributes to the disintegration of the material, while aerobic treatment appears to be nearly ineffective, especially for modified CA. The presence of cellulose acetate during anaerobic digestion of food waste increased the methane yield by about 4.5%. Bioassay confirmed the absence of possible toxic effects on the final compost from the bio-plastic treatment. Although bio-based materials are not the only solution to plastic pollution, the findings confirm the need to upgrade the organic waste treatment plants and the necessity to revise the requirements for the use of compost in agriculture.

Insects have a pivotal role in ecosystem function, thus the decline of more than 75% in insect biomass in protected areas over recent decades in Central Europe1 and elsewhere2,3 has alarmed the public, pushed decision-makers4 and stimulated research on insect population trends. However, the drivers of this decline are still not well understood. Here, we reanalysed 27 years of insect biomass data from Hallmann et al.1, using sample-specific information on weather conditions during sampling and weather anomalies during the insect life cycle. This model explained variation in temporal decline in insect biomass, including an observed increase in biomass in recent years, solely on the basis of these weather variables. Our finding that terrestrial insect biomass is largely driven by complex weather conditions challenges previous assumptions that climate change is more critical in the tropics5,6 or that negative consequences in the temperate zone might only occur in the future7. Despite the recent observed increase in biomass, new combinations of unfavourable multi-annual weather conditions might be expected to further threaten insect populations under continuing climate change. Our findings also highlight the need for more climate change research on physiological mechanisms affected by annual weather conditions and anomalies.