• Energy Research
• Restricted close
• 13. Climate action close
• US close
• ES close
• DE close
• CA close

In this paper, the performances of two iron-based syngas-fueled chemical looping (SCL) systems for hydrogen (H2) and electricity production, with carbon dioxide (CO2) capture, using different reactor configurations were evaluated and compared. The first investigated system was based on a moving bed reactor configuration (SCL-MB) while the second used a fluidized bed reactor configuration (SCL-FB). Two modes of operation of the SCL systems were considered, namely, the H2 production mode, when H2 was the desired product from the system, and the combustion mode, when only electricity was produced. The SCL systems were modeled and simulated using Aspen Plus software. The results showed that the SCL system based on a moving bed reactor configuration is more efficient than the looping system with a fluidized bed reactor configuration. The H2 production efficiency of the SCL-MB system was 11 % points higher than that achieved in the SCL-FB system (55.1 % compared to 44.0 %). When configured to produce only electricity, the net electrical efficiency of the SCL-MB system was 1.4 % points higher than that of the SCL-FB system (39.9 % compared to 38.5 %). Further, the results showed that the two chemical looping systems could achieve >99 % carbon capture efficiency and emit ~2 kg CO2/MWh, which is significantly lower than the emission rate of conventional coal gasification-based plants for H2 and/or electricity generation with CO2 capture.

The world, society and education are constantly evolving, and to respond to these changes, the main governmental institutions have been proposing different global strategies to focus efforts in the same direction. Currently, the United Nations and its 17 Sustainable Development Goals (SDG) have presented a series of indicators that could help to minimise the environmental, economic and social instability we are experiencing. In this sense, Education for Sustainable Development (ESD) has been described as a fundamental factor. Specifically, in previous work, we argued that physical education (PE) could be a good tool to contribute to SDGs. Based on this, no research analysing the voices of Physical Education Teachers (PET) on how this contribution could be made has been identified in previous literature. Therefore, the objectives of this research are: (1) to analyse the voices and opinions of active PETs in terms of the knowledge they have about Sustainable Development (SD); (2) to determine their opinions about the contribution that PE could make to SDGs; and finally, (3) to identify the challenges and limitations of pedagogical action of SD in PE. For this purpose, a qualitative analysis through a semi-structured interview with 41 active PETs was carried out. The main findings will be presented and discussed around four themes: (a) agreement on the concept of sustainability; (b) PE can contribute to the achievement of SDGs; (c) ambiguity in applying SDGs to PE lessons; and (d) teachers’ constraints on how to implement SDGs in PE. It seems to indicate that PETs do not have a multidimensional vision of sustainable development. While they recognise the potential of PE to contribute to SDGs through awareness raising and student learning, they point to its pedagogical and formative constraints as the main barriers to being able to contribute. They pointed to a lack of knowledge on how to do so, guidelines on how to integrate ESD, lack of involvement, shortage of time or resources in school physical education.

It is now environmentally desirable and legally mandatory to add renewable fuels such as ethanol or ethyl tert-butyl ether to gasoline. However, biofuels affect, among other properties, the distillation curve of gasoline, which is subject to strict regulations. This work presents a simple mathematical model capable of accurately predicting the influence that the addition of these oxygenates has on the distillation curve. In order to address this issue, it is essential to find a simple mathematical correlation between the boiling temperatures of the hydrocarbons present in gasoline and the properties (boiling temperature and volume or molar concentration of ethanol) of the corresponding azeotropic mixtures formed with ethanol. Power functions have been assumed to model the temperature composition diagrams of the vapour-liquid equilibrium. Experimental data previously published by these and other authors have been used to fit and validate the model. The results provided by the mathematical model can be of great interest to understand the process of fuel evaporation in spark-ignition engines or the adjustment of distillation cuts in refineries, in order to comply with the regulations, in terms of the distillation curve, after adding ethanol or ethyl tert-butyl ether.

Abstract This work assesses the impacts of aggressive driving behavior on pollutants emissions and energy consumption at a city level. Furthermore, it performs an economic analysis considering the potential avoided emissions and fuel savings and discusses potential policy measures to address this topic. The results showed that aggressive driving significantly impacts energy consumption and emissions, with energy consumption increasing by more than ∼200% and emissions by 330% for aggressive driving compared to non-aggressive driving (in MJ/km and in g/km, respectively). This increment was found to be even higher for diesel vehicles than for gasoline vehicles. On the contrary, gasoline vehicles showed higher percentages of increase for most emissions (CO, NOx and NO). Results also revealed that aggressive driving impacts are higher for local streets when examining the city level. Moreover, the economic analysis showed that significant cost reductions may be achieved by avoiding aggressive driving, reaching up to 52.5 k€ on a daily basis. In conclusion, this study is of particular relevance to policy makers and urban planners, enabling to obtain a comprehensive overview of the impacts of aggressive driving behaviors at a city level and providing new insights to perform further developments and to assess the feasibility of the implementation of policy measures.

The aim of this report is to demonstrate and evaluate the potential of tall wheatgrass (Elytrigia elongata) to avoid GHG emissions and obtain lower economic costs in marginal areas of Spain. Our research built scenarios based on experimental plots (2 and 3 years growth) in 3 locations of Spain with completely different climate conditions (provinces of Girona, Soria and Palencia). In our experiences, we achieved an adequate establishment and biomass production, and assumed a rank of biomass yields until the end of the life cycle that is usually accepted to be about 15 years in many other studies in United States, Argentina and Eastern Europe where tall wheatgrass is extensively cultivated in marginal areas for sheep livestock production. Using our experimental plots and statistical information for economic inputs costs, we built 5 different scenarios per region considering a large range of biomass yields of tall wheatgrass. The analysis included a comparison with annual grasses economic costs calculated for a wide range of biomass yields of a previous study. We estimated GHG emissions savings for tall wheatgrasses and used our previous study (which had GHG emissions savings as well). Savings were calculated replacing natural gas electricity with electricity from biomass combustion in real power plants in Spain. In a wide range of yields, the results suggest that marginal areas might present a better performance with tall wheatgrass compared to annual winter grasses (cereals whole plant cuttings), thus producing biomass yields with higher GHG savings and lower economic costs at the farm level. Proceedings of the 20th European Biomass Conference and Exhibition, 18-22 June 2012, Milan, Italy, pp. 217-229

In this study, air concentrations of BaP in two different seasons (winter 2015 and summer 2016) and BaP levels in ground vegetation from Tarragona County were used as control simulations performed with the WRF-CHIMERE air quality modelling system, in order to reproduce the incidence of that hazardous chemical in air and soils. The CTM was validated for the present climatology, showing a good ability to represent air and soil concentrations of BaP over the target domain (petrochemical, chemical, urban and background sites), particularly in the winter. Then, the variation of the BaP concentrations in air and soils were simulated for the time series 1996-2015 and for the climate change scenario RCP8.5 (2031-2050). While an increase is projected for the levels in air, particularly in chemical and remote sites where the variation can go up to 10%, in terms of soil deposition the findings are the opposite, with an evident decrease in soil BaP concentrations, particularly for background sites. Finally, a potential health effect of BaP for the local population (lung cancer) was assessed. Although according to the projections the EU threshold for BaP atmospheric incidence (1 ng m-3) will not be reached by 2050, there will be an increase in the life-time risk of lung cancer, particularly in the most populated areas within the simulation domain.

Alternative fuels and energy vectors are becoming increasingly important in terms of technical, geopolitical, economic, and environmental aspects. In particular, gaseous fuels and vectors, such as fossil or synthetic natural gas (NG) blended with hydrogen, commonly help provide optimal strategies to reduce global and toxic emissions of internal combustion engines, owing to their adaptability, anti-knock capacity, lower toxicity of pollutants, reduced CO2 emissions, and costeffectiveness. However, diesel engines still represent the reference category among internal combustion engines in terms of maximum thermodynamic efficiency. The possibility offered by dual-fuel (DF) systems to combine the efficiency and performance of diesel engines with the environmental advantages of gaseous fuels has been the subject of extensive investigations. However, the simple replacement of diesel fuel with gaseous fuel does not allow for optimising the engine performance, owing to the high percentage of unburned gaseous fuel, which compromises the potential reduction of CO2; therefore, more complex combustion strategies should be realised. In this study, with the aim of improving the DF combustion process, an experimental investigation was performed to analyse low-temperature combustion (LTC), using NG and two enriched hydrogen-compressed NG blends as primary fuels. The LTC mode was activated by means of a very early advanced pilot injection and carried out in two close steps. The double pilot injection was used to control the energy release rate in the first combustion stage, thereby minimizing the increase of the rate of pressure and allowing the extension of the operation range under LTC. The experimental activity was also focused on analysing the particle emissions, as it is well known that these emissions, together with those of nitrogen oxide, constitute the main pollutants resulting from diesel fuel combustion. The results demonstrated the potential to reduce the unburned fuel, NOx, and particle emissions simultaneously, while maintaining equivalent CO2 emissions to a diesel-only engine. Both the timing and pressure of the pilot injection proved to be critical parameters for optimising the emissions and performance

Clean combustion technologies, based on reactant dilution, have shown very peculiar and innovative characteristics. Reduction of light and noise emission and uniformity of temperature and composition distribution inside the combustion chamber, related to an extension of the reaction zone, make these processes very promising in several technological fields. Analysis of combustion in very diluted conditions is needed for a general understanding of these processes, which remain unknown from many aspects. The study is also useful for the identification of practical constraints which define the most suitable reactor configurations and working parameters for process reliability. The present work deals with a theoretical analysis of methane oxidation in diluted conditions using one of the detailed kinetic schemes available in the literature. A well-stirred reactor (WSR) configuration has been considered as a first attempt of process schematization. This choice is consistent with the experimental characterization of the flameless combustion processes. The influence of residence time, C/O ratio, and inlet temperature on the steady state was studied for an oxygen molar fraction (0.05), chosen as representative of flameless combustion processes. It has been pointed out that only rich conditions (C/O ? 0.25) are possible for WSR creation, because they allow partial methane conversion. Three kinetic regimes, related to different temperature ranges, have been identified on the basis of product distribution analysis. Both the oxidation and pyrolitic regimes, occurring respectively in low- and high-temperature ranges, are the most interesting working conditions for diluted combustion. The former, leading to CO and H2O as main reaction products, is suitable for reburning technology. The latter, which corresponds to large production of CO and H2, has been shown to be a reasonable explanation of flameless combustion. Advantages and potentials of this innovative process are analyzed, taking into account the kinetic pathway followed in the different working conditions.