• Energy Research
• 2021-2025close
• IT close
• GB close
• DE close
• EU close
• Sustainability close

Floods are among the most devastating disasters in terms of socio-economics and casualties. However, these natural disasters can be managed and their effects can be minimized by flood modeling performed before the occurrence of a flood. In this study, flood modeling was developed for the Göksu River Basin, Mersin, Türkiye. Flood hazard and risk maps were prepared by using GIS, HEC-RAS, and HEC-HMS. In hydraulic modeling, Manning’s n values were obtained from 2018 CORINE data, return period flow rates (Q25, Q50, Q100, Q500) were obtained from HEC-HMS, and the application was carried out on a 5 m resolution digital surface model. In the study area, the water depths could reach up to 10 m, and water speeds were approximately 0.7 m/s. Considering these values and the fact that the study area is an urban area, hazard maps were obtained according to the UK Department for Environment, Food and Rural Affairs (DEFRA) method. The results indicated that possible flood flow rates from Q25 to Q500, from 1191.7 m3/s to 1888.3 m3/s, were detected in the study area with HEC-HMS. Flooding also occurred under conditions of the Q25 flow rate (from 4288 km2 to 5767 km2), and the impacted areas were classified as extremely risky by the DEFRA method.

Hydrothermal carbonization (HTC) provides an attractive alternative method for the treatment of high-moisture waste and, in particular, digested sludge. HTC could reduce the costs and environmental risks associated with sludge handling and management. Although it is recognized that the dewaterability of hydrochars produced from digested sludge, even at mild temperatures (180–190 °C), is highly improved with respect to the starting material, the filterability of HTC slurries for the recovery of the solid material (hydrochar) still represents a challenge. This study presents the results of an investigation into the filterability of agro-industrial digested sludge HTC slurries produced by a C-700 CarboremTM HTC industrial-scale plant. The filterability of HTC slurries, produced at 190 °C for 1 h, with the use of acid solutions of hydrochloric acid, sulfuric acid or citric acids, was investigated by using a semi-industrial filter press. The use of sulfuric acid or citric acid solutions, in particular, significantly improved the filterability of HTC slurries, reducing the time of filtration and residual moisture content. The acid treatment also promoted the migration of heavy metals and phosphorus (P) in the HTC filtrate solution. This study demonstrates that P can be recovered via the precipitation of struvite in high yields, recovering up to 85 wt% by mass of its initial P content.

In the transition from linear production systems, unsustainable from the point of view of resources, to a model that finds strength in environmental, social and economic sustainability, the circular economy paradigm is the foundation that facilitates the planetary agro-ecological transition. The European Union has taken a number of steps (including the Circular Economy Package of Directives) shaping circularity as a wide-ranging driver measure involving many sectors. The paper intends to provide a regulatory framework on the current general situation regarding circularity in European Union, in order to extrapolate and give evidence to the aspects that intersect the agri-food sector. This is not only because they are poorly addressed in the literature, but also because there is a lack of regulatory instruments on the circular economy specifically addressing this area of interest. For this purpose, the analysis focuses on waste and residue/scrap management issues, recognized by law as by-products and end-of-waste status, as they are covered by circular economy legislation and as they can be applied to the agri-food sector. The latter allow the implementation of circularity strategies in the agri-food sector and, given the numerousness of production chains and the peculiarities of each of them, various regeneration and/or reuse processes of specific resources may be depicted. The intent is to provide useful knowledge on how to implement sustainable waste management, also proposing a concrete case on a by-product of olive oil processing, through which it is possible to highlight how the correct application of regulations favors the adoption of circular economic and management models in the firms involved, as well as informing the relevant economic operators on the possible profiles of legal liability that may arise from insufficient knowledge. Furthermore, this paper delves into the European Green Deal’s Strategy as it enriches the circular economy paradigm with new facets. NextGenerationEU and the National Recovery and Resilience Plan financially support this strategy in the aftermath of the socioeconomic crisis from COVID-19 in the EU Member States. This is in order to achieve the objective of achieving the agro-ecological transition.

Although the United Nations’ Sustainable Development Goals (SDGs) advocate, through SDG 4 and SDG 10, equitable quality education and the reduction of inequalities within and between countries, respectively, few studies have examined how inequalities in regional sustainability influence higher education. Therefore, this study aims to examine the relationship between regional sustainability and higher education in China using fixed-effects panel modelling. A systematic force framework showing how regional sustainability drives higher education was constructed from economic, social, and environmental perspectives, and the endogeneity in the process of how regional sustainability affects higher education was explored by introducing one-year lagged values as instrumental variables. Our results show that regional sustainability has a significant impact on higher educational attainment in China, with differing effects in the eastern, central, and western regions, respectively. In central China, economic sustainability plays a significant positive role in higher educational attainment; in the western region, economic and social sustainability have stronger positive effects, while environmental sustainability has significantly negative effects. In terms of policy implications, our findings can be used to support regional development policies to promote regional higher education.

How can urban policies and planning approaches help in achieving a safer mobility and carbon reduction in the transport sector? The attention of planners and policy makers towards the promotion of sustainability and reduction of environmental impacts has grown in recent years. This paper investigates the role that Urban Planning plays in the long term towards a safer and climate friendlier mobility, highlighting the need for integrated approaches gathering spatial planning and mobility management. After a review of several urban policies and planning strategies, initiatives, and approaches, mainly based on the urban scale, the paper presents an urban regeneration case study leading to an increase of pedestrian accessibility at the neighborhood level. This can be seen as a support tool to foster sustainable, safe, and climate friendly mobility in cities. The results of the performed analysis show a dependency of accessibility from two different factors: the distribution of services and the capillarity of the soft mobility network, which can contribute to creating a more walkable space.

Walkability has become a research topic of great concern for preserving public health, especially in the era of the COVID-19 outbreak. Today more than ever, urban and transport policies, constrained by social distancing measures and travel restrictions, must be conceptualized and implemented with a particular emphasis on sustainable walkability. Most of the walkability models apply observation and subjective methods to measure walkability, whereas few studies address walkability based on sense perception. To fill this gap, we aim at investigating the perceived neighbourhood walkability (PNW) based on sense perception in a neighbourhood of Brussels. We designed a survey that integrates 22 items grouped into 5 dimensions (cleanness, visual aesthetics, landscape and nature, feeling of pressure, feeling of safety), as well as the socio-demographic attributes of the participants. Using various statistical methods, we show that socio-demographics have almost no effects on perceived neighbourhood walkability. Nonetheless, we found significant differences between groups of different educational backgrounds. Furthermore, using a binomial regression model, we found strong associations between PNW and at least one item from each grouping dimension. Finally, we show that based on a deep neural network for classification, the items have good predictive capabilities (78% of classification accuracy). These findings can help integrate sense perception into objective measurement methods of walkable environments. Additionally, policy recommendations should be targeted based on differences of perception across socio-demographic groups.

Due to climate change and current efforts to reduce emissions in the construction sector, this study evaluates and discusses the results of a comparative cradle-to-grave Life Cycle Assessment (LCA), with a main focus on Global Warming Potential for functionally equivalent carbon-reinforced concrete (CRC) and steel-reinforced concrete (SRC) façade panels for the first time. The novelty of this study is the focus on construction waste and, in particular, the worst-case application of non-recycled construction waste. The use of CRC requires a lower concrete thickness than SRC because the carbon fiber reinforcement does not corrode, in contrast to steel reinforcement. Façade panels of the same geometrical dimensions and structural performance were defined as functional units (FU). Assuming an End-of-Life (EoL) scenario of 50% landfill and 50% recycling, the Global Warming Potential (GWP, given in CO2 equivalent (CO2e)) of the CRC façade (411–496 kg CO2e) is shown to perform better than or equal to the SRC façade (492 kg CO2e). Changing the assumption of CRC to a worst-case scenario, going fully to landfill and not being recycled (single life cycle), turns the GWP results in favor of the SRC façade. Assuming a 50-year service life for the SRC façade panel and relativizing the emissions to the years, the more durable CRC façade performs much better. Finally, depending on the system boundary, the assumed EoL and lifetime, CRC can represent a lower-emission alternative to a functionally equivalent component made of SRC. The most important and “novel” result in this study, which also leads to future research opportunities, is that delicate adjustments (especially concerning EoL scenarios and expected service life) can lead to completely different recommendations for decision-makers. Only by combining the knowledge of LCA experts, structural engineers, and builders optimal decisions can be made regarding sustainable materials and building components.

The land transformation process in the last decades produced the urbanization growth in flat and coastal areas all over the world. The combination of natural phenomena and human pressure is likely one of the main factors that enhance coastal dynamics. These factors lead to an increase in coastal risk (considered as the product of hazard, exposure, and vulnerability) also in view of future climate change scenarios. Although each of these factors has been intensively studied separately, a comprehensive analysis of the mutual relationship of these elements is an open task. Therefore, this work aims to assess the possible mutual interaction of land transformation and coastal management zones, studying the possible impact on local coastal communities. The idea is to merge the techniques coming from urban planning with data and methodology coming from the coastal engineering within the frame of a holistic approach. The main idea is to relate urban and land changes to coastal management. Then, the study aims to identify if stakeholders’ pressure motivated the deployment of rigid structures instead of shoreline variations related to energetic and sedimentary balances. The influence of coastal protection (described by an indicator taking into account the linear density of the rigid protection extension alongshore) measures have been considered. Finally, the economical performances in the period just after the land transformation have been studied by means of a dimensionless index based on the concept of the local unit. The method has been applied to the case study of the Abruzzo Region. Results reveal a large urbanization growth and a generalized over-protection of the coast with a resulting spatial alternation of shoreline retreat and advance. On the other hand, the analysis of the local economy reveals that the presence of tourism activities does not necessarily lead to an increase in the local economy. Indeed, the most important improvement in local economies in the region can be associated with coastal stretches characterized by a high environmental value.