• Energy Research
• Restricted close
• DE close
• CH close
• UA close

In this paper, the performances of two iron-based syngas-fueled chemical looping (SCL) systems for hydrogen (H2) and electricity production, with carbon dioxide (CO2) capture, using different reactor configurations were evaluated and compared. The first investigated system was based on a moving bed reactor configuration (SCL-MB) while the second used a fluidized bed reactor configuration (SCL-FB). Two modes of operation of the SCL systems were considered, namely, the H2 production mode, when H2 was the desired product from the system, and the combustion mode, when only electricity was produced. The SCL systems were modeled and simulated using Aspen Plus software. The results showed that the SCL system based on a moving bed reactor configuration is more efficient than the looping system with a fluidized bed reactor configuration. The H2 production efficiency of the SCL-MB system was 11 % points higher than that achieved in the SCL-FB system (55.1 % compared to 44.0 %). When configured to produce only electricity, the net electrical efficiency of the SCL-MB system was 1.4 % points higher than that of the SCL-FB system (39.9 % compared to 38.5 %). Further, the results showed that the two chemical looping systems could achieve >99 % carbon capture efficiency and emit ~2 kg CO2/MWh, which is significantly lower than the emission rate of conventional coal gasification-based plants for H2 and/or electricity generation with CO2 capture.

Dielectric elastomers are highly promising as functional materials for the rapidly developing field of flexible actuator and generator technology. They offer a unique combination of low densities and large reversible deformations of up to more than 100% in area, and consequently have great potential for many new types of application. However, implementation has been impeded by the lack of specialized materials. The elastomers that have so far been investigated suffer from a number of disadvantages, including the need for very high activation voltages and limited service lifetimes. This thesis describes an investigation of the use of elastomeric composites as dielectric elastomers with the aim of optimizing and improving their performance in actuators. The influence of materials properties on actuation was first analyzed on the basis of a simple physical model and materials properties derived from standard test methods. The implications for the actuation performance of three conventional dielectric elastomers were then considered in detail. A preliminary conclusion was that the actuation performance could be improved if the permittivity of the elastomers were to be increased by modification with ceramic or conductive fillers. However, actuation performance was shown to depend not only on the permittivity, but also on the elastic modulus, the electrical breakdown strength, and strain hardening. Thus, although significant increases in permittivity were achieved by this approach, actuation performance was compromised by an increase in modulus in the case of the ceramic fillers, and a dramatic drop in electrical breakdown strength, in the case of the conducting fillers. A more promising approach was therefore suggested to be the use of an organic conducting filler encapsulated in an insulating matrix. It was demonstrated that it is indeed possible to increase the permittivity of a given elastomer while maintaining a high electrical breakdown strength. Different processing routes were investigated in order to control the dispersion of the filler and tailor performance. The optimum filler concentration, i.e. that providing the best compromise between permittivity and stiffness, was determined to be approximately 16 vol%, resulting in an improvement by a factor of 2 in actuation strain for a given applied voltage over that obtained with the unmodified matrix. Higher filler concentrations were also argued to have considerable potential for use in generators, given that the observed increased permittivity was also associated with high electrical breakdown strengths and increased strains at break. A threefold increase in converted energy per working cycle was predicted for a composite containing 25.5 vol% fillers based on a simplified model for a dielectric elastomer generator. Whilst these results are extremely encouraging, it is concluded that the composite approach has, in general, only limited potential as a means of obtaining further increases in actuation performance. The major difficulty remains that the use of a relatively rigid second phase to increase dielectric performance will inevitably also increase the elastic modulus beyond a certain filler concentration. As argued in the final part of the thesis, the way forward may therefore ultimately depend on the development of new types of synthetic elastomeric matrix materials that combine intrinsic improvements in electrical response with reduced moduli.

We report on surface channeling experiments of singly charged ions on single crystal surfaces of Pt(1 1 0) and Pd(1 1 0). Using a time-of-flight system installed in forward direction we analyze the energy distribution of the scattered projectiles. By variation of the primary energy and the angle of incidence we investigate effects of the perpendicular energy on the channeling features. The perpendicular energy is defined as E-perpendicular to = E(0)sin(2)psi with psi the angle of incidence. In combination with precise azimuthal rotations of the crystal, we are sensitive to axial channeling and obtain information about the limits of axial surface channeling. From a comparison with detailed trajectory calculations we find that axial channeling effects are most pronounced for a perpendicular energy between 5 and 20 eV. As a result, we obtain an exemplary channeling map for the interaction of nitrogen ions with the (1 x 2) reconstructed Pt(1 1 0) surface identifying different channeling regimes. (c) 2004 Elsevier B.V. All rights reserved.

The search for affordable high performance electrode materials in photoelectrochemical hydrogen production by solar water splitting is an ongoing quest. Hematite is a photoanode material with an electronic band gap suitable for efficient absorption of visible light in a photoelectrochemical cell (PEC). Although its poor electronic structure makes hematite a controversial candidate for PEC, it remains promising because it is an earth abundant, chemically stable and low cost material – necessary prerequisites for PEC to become a competitive cost-efficient solar fuel economy. In addition to reviewing some recent PEC research on hematite and its relevant physical and chemical characteristics, we show how hematite obtained by a low cost synthesis can be refined by hydrothermal treatment and further functionalized by coating with phycocyanin, a light harvesting protein known for photosynthesis in blue-green algae.

Solar Energy Materials and Solar Cells, 116 + (2013) 176-181. doi:10.1016/j.solmat.2013.04.019

Distributed power generation and cogeneration of heat and power is an attractive way toward a more rational conversion of fossil and bio fuels. Solid oxide fuel cell (SOFC) – gas turbine (GT) hybrid systems are emerging as the most promising candidates enabling the achievement of a cleaner and more efficient conversion of a large variety of resources across a broad power range covering from small to medium scale applications. This thesis introduces an innovative concept of SOFC-GT hybrid system that allows reaching efficiencies higher than the state of the art while enabling the carbon dioxide separation and avoiding fuel cell pressurisation technical issues. Several hybrid system design alternatives based on this concept are analysed through a thermodynamic optimisation approach combining process modelling, advanced process integration techniques and multi-objective optimisation. A number of optimal hybrid system configurations are determined for different design targets. The results consistently demonstrate the higher energy conversion performance and flexibility enabled with respect to the state of the art. The innovative concept analysis is extended to two applications for which SOFC-GT hybrid cycles are expected to provide the most significant impact toward sustainability: the small scale distributed generation and the conversion of renewable resources. A simplified version of the new hybrid system layout is especially developed for small scale distributed generation, typical of residential building applications (5-10 kWel). Experimental data are used to prove the technical feasibility of the system and to assess the performance potentially achievable with currently feasible technologies. The results of the analysis underline that energy conversion efficiencies higher than traditional centralised power generation can be achieved even at such a small scale. A systematic process integration and optimisation approach is used to assess the energy conversion performance of the original SOFC-GT hybrid cycle fuelled with hydrothermally gasified wet waste biomass. The analysis highlights the considerable potential of the integrated system that allows for converting wet waste biomass into electricity with First Law efficiency higher than 60% while simultaneously enabling the separation of the biogenic carbon dioxide.

The transition to a low carbon future is starting to affect landscapes around the world. In order for this landscape transformation to be sustainable, renewable energy technologies should not cause critical trade-offs between the provision of energy and that of other ecosystem services such as food production. This literature review advances the body of knowledge on sustainable energy transition with special focus on ecosystem services-based approaches and methods. Two key issues emerge from this review: only one sixth of the published applications on the relation between renewable energy and landscape make use of the ecosystem service framework. Secondly, the applications that do address ecosystem services for landscape planning and design lack efficient methods and spatial reference systems that accommodate both cultural and regulating ecosystem services. Future research efforts should be directed to further advancing the spatial reference systems, the use of participatory mapping and landscape visualizations tools for cultural ecosystem services and the elaboration of landscape design principles.

Since 2007, a range of new modeling approaches and tools have been developed for sustainability impact assessment (SIA), but a lack of universal acceptance of SIA tools in applied policy making is observed. The current article gives an overview of experiences from several European and international projects, critically reviews the selected SIA tools and then discusses a number of reasons for the observed disconnect of the tools with the potential users. Largely based on the experiences of the presented SIA tools focusing land use policy advice, a decision tree is designed, which may facilitate an adequate, region and developmental phase specific selection of tool-box components for the development of SIA tools in future. Elements to ensure end-user participation are also integrated in the decision tree in order to increase the likelihood of the tool in applied land use policy advice. In addition, the Challenges in SIA tool development and use are further discussed.