• Energy Research
• 2016-2025close
• DE close
• UA close
• Karlsruhe Institute of Technology close

Abstract The objective of this work is to evaluate the surge characteristics of an axial compressor operating under surge conditions, by using a hybrid BDF/harmonic balance method. During a surge event, a large amount of backflow occurs in the compressor. Consequently, the airflow oscillates along the axial direction at a low frequency, which can considerably damage the compressor. In this paper, a numerical investigation is performed to examine the effects of the system volume and average mass flow on the surge characteristics of a transonic high speed single stage axial compressor (stage 35) designed and evaluated at the NASA Glenn Center. The results show that the oscillation frequency of the airflow in the compressor generally ranges from 14.32–26.04 Hz during surge conditions, and both the system volume and average mass flow considerably influence the surge characteristics. For a constant average mass flow, as the system volume decreases, the oscillation frequency of the airflow in the compressor increases slightly, while the oscillation amplitude of the exit static pressure decreases significantly, and the maximum static pressure at the outlet remains nearly constant. In the case of a constant system volume, with the decrease in the average mass flow, the oscillation frequency of the airflow in the compressor gradually decreases, and the oscillation amplitude of the exit pressure increases significantly. With a further decrease in the average mass flow, the oscillation frequency stabilizes at a certain point and does not change thenceforth. Furthermore, the surge frequency obtained using the numerical method shows a same tendency with the Helmholtz frequency, but there is a considerable difference between them.

Abstract Electricity markets in Europe become increasingly interconnected due to new grid connections and market coupling regulations. This paper examines the interdependencies between the Swiss electricity market and those of neighbouring countries. The Swiss market serves as a good example for a smaller electricity market which is increasingly affected by developments in the large neighbouring countries. To study these cross-border effects, especially those on Swiss electricity prices, we apply two different methodologies, an econometric and a Nash-Cournot equilibrium model. The analyses show that the Swiss electricity price correlates strongly with the German electricity price in the summer, but tends to follow the French electricity price in the winter. Another finding is that gas prices and the electricity load of neighbouring countries have a significant influence on prices. In particular, the load of France and Italy is driving up Swiss prices in the winter, while the German electricity demand and renewable energy generation have a larger influence on Swiss prices in the summer.

A reduction of the inactive components can increase the energy density and reduce production cost of Li‐ion batteries. But an effective reduction of the binder amount also negatively affects the adhesion of the electrode. Herein, slot‐die coating of a primer layer for Li‐ion anodes is investigated. It is shown that the use of a primer layer with only 0.3 g m−2 can increase the adhesive force by the factor of 5 as well as the cell performance for anodes with low binder content. The process limits for a stable, defect‐free primer coating are investigated at coating speeds of up to 550 m min−1. The limits coincide both for a setup without vacuum box and with vacuum box with theory‐based equations. By using a vacuum box, the minimum wet film thickness can be reduced by half.

Smart charging of Electric Vehicles (EVs) reduces operating cost, allows more sustainable battery usage, and promotes the rise of electric mobility. In addition, bidirectional charging and improved connectivity enable efficient power grid support. Today, however, uncoordinated charging, e.g., governed by users’ habits, is still the norm. Thus, the impact of upcoming smart charging applications is mostly unexplored. We aim to estimate the expenses inherent with smart charging, e.g., battery aging costs, and give suggestions for further research. Using typical onboard sensor data we concisely model and validate an EV battery. We then integrate the battery model into a realistic smart charging use case and compare it with measurements of real EV charging. The results show that i) the temperature dependence of battery aging calls for precise thermal models for charging power greater than 7 kW, ii) disregarding battery aging underestimates EVs’ operating cost by approx. 30%, and iii) the profitability of Vehicle-to-Grid (V2G) services based on bidirectional power flow, e.g., energy arbitrage , depends on battery aging costs and the electricity price spread.

The new GHG calculator named SECTOR (Source-selective and Emission-adjusted GHG CalculaTOR for Cropland) is based on the IPCC Tier 2 approach for rice as well as other crops. The new features of SECTOR facilitate high flexibility in terms of entering newly obtained emission factors, easy data transfer from crop statistics for entering activity data and detailed specifications of GHG scenarios. A new procedure of entering frequency-based data on current water management practices was also developed. Moreover, the tool allows deviating from the 2006 IPCC Guidelines by considering field records with high background levels of N₂O emissions in the overall assessment of GHG emissions. This article assesses different applications of the tool, namely as add-ons to field measurements, for GHG calculation at national/sectorial scale and within measurement, reporting and verification of development projects. SECTOR is downloadable in the form of templates that can be used to develop custom versions with varying levels of disaggregated data entries at different scales. A case study for rice production in one Vietnamese province demonstrates the potential to display GHG results in combination with GIS. SECTOR can easily be adjusted to incorporate new emission factors and calculation procedures expected in forthcoming revisions of the IPCC Guidelines.

During the Engineering Validation and Engineering Design Activities (EVEDA) phase (2007-2014) of the International Fusion Materials Irradiation Facility (IFMIF), an advanced engineering design of the High Flux Test Module (HFTM) has been developed with the objective to facilitate the controlled irradiation of steel samples in the high flux area directly behind the IFMIF neutron source. The development process addressed included manufacturing techniques, CAD, neutronic, thermal-hydraulic and mechanical anal- yses complemented by a series of validation activities. Validation included manufacturing of 1:1 parts and mockups, test of prototypes in the FLEX and HELOKA-LP helium loops of KIT for verification of the thermal and mechanical properties, and irradiation of specimen filled capsule prototypes in the BR2 test reactor. The prototyping activities were backed by several R&D studies addressing focused issues like han- dling of liquid NaK (as filling medium) and insertion of Small Specimen Test Technique (SSTT) specimens into the irradiation capsules. This paper provides an up-todate design description of the HFTM irradiation device, and reports on the achieved performance criteria related to the requirements. Results of the vali- dation activities are accounted for and the most important issues for further development are identified.

Electrically powered buses reduce CO$_{2}$ and noise emissions in urban areas and thus promote the trend towards more livable cities. Upon this reason, more and more cities are introducing their first electrified lines as pilot projects. However, no standardized technology has yet emerged, which is why statements on interactions between vehicle, operation and infrastructure in public transport are proving to be difficult to make. In order to be able to make statistically significant statements in this respect, a simulation model was developed that depicts the three subsystems vehicle, operation and infrastructure. On the basis of measurement data from the PRIMOVE research project in Mannheim, in which an urban bus line is operated with two electrically powered buses, the simulation model was validated and a data basis was laid for further investigations. As a result, simulation studies with more than 700 simulated operating days could be carried out, the results of which represent the input for the following statistical analysis. Based on this analysis, the interactions described above will be demonstrated in the design of the main technical parameters, the battery lifespan and the energy demand of electrical bus lines. Through the findings of these simulations, an optimized version of the already electrified bus line in Mannheim will then be presented. Finally, a novel design methodology for electrification based on a multi-objective optimization is introduced. All parameters of the system are variable in order to apply the presented methodology to other projects and thus underline the general validity of the work.