• Energy Research
• 11. Sustainability close
• DK close
• IT University of Copenhagen close

Abstract District heating (DH) enables the utilisation and distribution of heating from sources unfeasible for stand-alone applications and combined with cogeneration of heat and power (CHP), has been the cornerstone of Denmark’s realisation of a steady national primary energy supply over the last four decades. However, progressively more energy-efficient houses and a steadily improving heat pump (HP) performance for individual dwellings is straining the competitive advantage of the CHP–DH combination as DH grid losses are growing in relative terms due to decreasing heating demands of buildings and relatively high DH supply temperatures. A main driver for the DH water temperature is the requirements for domestic hot water (DHW) production. This article investigates two alternatives for DHW supply: (a) DH based on central HPs combined with a heat exchanger, and (b) a combination of DH based on central HPs and a small booster HP using DH water as low-temperature source for DHW production. The analyses are conducted using the energyPRO simulation model and are conducted with hourly varying factors; heating demands, DH grid losses, HP coefficient of performance (COP) and spot market prices in order to be able to analyse the relative performance of the two options and their performance over the year. Results are also compared to individual boilers and individual HPs. The results indicate that applying booster HPs enables the DH system to operate at substantially lower temperature levels, improving the COP of central DH HPs while simultaneously lowering DH grid losses significantly. Thus, DH performance is increased significantly. Additionally, performance for the DH HP with booster combination is considerably better than individual boiler or HP solutions.

This paper presents a new method, based on the Smart Energy Systems concept. The aim is to increase the share of renewable energy penetration on islands. The method is applied to the island of Gran Canaria (Spain), considering the entire energy system of the island. Several smart renewable energy strategies are proposed following a cross-sectoral approach between the electricity, heating/cooling, desalination, transport and gas sectors. The different smart renewable energy strategies were applied in a series of steps, while looking for a transition from the current energy system to a nearly 100% renewable energy system. Based on the results, the study concludes that the suggested method is applicable for increasing renewable integration on islands and can potentially be used in helping energy planners to take decisions about priorities in development of the sector to improve such integration. The results indicate that, for the case of Gran Canaria, a 75.9% renewable energy system could be attained with technologies that can be implemented at present. Furthermore, it is shown that a nearly 100% renewable energy system in Gran Canaria is technically feasible and could be achieved if certain technologies acquire greater maturity. © 2018 Elsevier Ltd 443 421 2,048 5,537 Q1 Q1 SCIE

Abstract The increasing global energy demand, the foreseen reduction of available fossil fuels and the increasing evidence off global warming during the last decades have generated a high interest in renewable energy sources. However, renewable energy sources, such as wind and solar power, have an intrinsic variability that can seriously affect the stability of the energy system if they account for a high percentage of the total generation. The Energy Flexibility of buildings is commonly suggested as part of the solution to alleviate some of the upcoming challenges in the future demand-respond energy systems (electrical, district heating and gas grids). Buildings can supply flexibility services in different ways, e.g. utilization of thermal mass, adjustability of HVAC system use (e.g. heating/cooling/ventilation), charging of electric vehicles, and shifting of plug-loads. However, there is currently no overview or insight into how much Energy Flexibility different building may be able to offer to the future energy systems in the sense of avoiding excess energy production, increase the stability of the energy networks, minimize congestion problems, enhance the efficiency and cost effectiveness of the future energy networks. Therefore, there is a need for increasing knowledge on and demonstration of the Energy Flexibility buildings can provide to energy networks. At the same time, there is a need for identifying critical aspects and possible solutions to manage this Energy Flexibility, while maintaining the comfort of the occupants and minimizing the use of non-renewable energy. In this context, the IEA (International Energy Agency) EBC (Energy in Buildings and Communities program) Annex 67: “Energy Flexible Buildings” was started in 2015. The article presents the background and the work plan of IEA EBC Annex 67 as well as already obtained results. Annex 67 is a corporation between participants from 16 countries: Austria, Belgium, Canada, China, Denmark, Finland, France, Germany, Ireland, Italy, The Netherlands, Norway, Portugal, Spain, Switzerland and UK.

Abstract Global energy consumption is increasing at a dramatic rate and will likely continue to do so. The major source of energy is still fossil fuel, which has resulted in the well-documented problem of global warming due to the emission of greenhouse gases from the burning of such fuel. Climate change and global warming are among the crucial and complex issues encountered by the world today, and they require an immediate solution. Technological innovation is the key to ensuring energy security without causing emissions and providing efficient cost-effective energy solutions. Power electronic technologies offer high reliability and renewable energy conversion efficiency, thus contributing to energy conservation, improving energy efficiency, and helping in the mitigation of harmful global emissions. This review focuses on various aspects of power electronic technologies and their importance in tackling carbon emission and global warming problems. The key topologies of power electronic converters are explained based on types, control difficulties, benefits, and drawbacks. Power electronic controllers utilized for energy conversion are comprehensively reviewed with regard to their structure, algorithm complexity, strengths and weaknesses, and mathematical modeling. The review focuses on power converters and controllers used in different applications and highlight their contributions to energy conservation, increasing the share of renewable energy sources, and mitigating emissions. Moreover, existing research gaps, issues, and challenges are identified. The insights provided by are expected to lead to the enhanced development of advanced power electronic converters and controllers for sustainable energy conversion. Such development can reduce carbon emissions and mitigate global warming.

Decision analysis is often used to help decision makers choose among alternatives, based on the expected utility associated to each alternative as function of its consequences and potential impacts. Environmental impacts are not always among the prioritized concerns of traditional decision making. This has fostered the development of several environmental problems and is nowadays a reason of concern. Life Cycle Assessment (LCA) can assess an extensive range of environmental impacts associated with a product or service system and support a life cycle perspective on the alternative products or service systems, revealing potential problem shifting between life cycle stages. Through the integration with traditional risk based decision analysis, LCA may thus facilitate a better informed decision process. In this study we explore how environmental impacts are taken into account in different fields of interest for decision makers to identify the need, potential and obstacles for integrating LCA into conventional approaches to decision problems. Three application areas are used as examples: transportation planning, flood management, and food production and consumption. The analysis of these cases shows that environmental impacts are considered only to a limited extent in traditional evaluation of transport and food projects. They are rarely, if at all, addressed in flood risk management. Hence, in each of the three cases studied, there is a clear need for the inclusion of a better and systematic assessment of environmental impacts. Some LCA studies have been conducted in all three research areas, mainly on infrastructures and production systems. The three cases show the potential of integrating LCA into existing decision analysis by providing the environmental profiles of the alternatives. However, due to different goals and scopes of LCA and other decision analysis approaches, there is a general lack of consistency in study system scoping in terms of considered elements and boundaries, in uncertainty treatment, and in applied metrics. In the present paper, we discuss the obstacles arising when trying to integrate LCA with conventional evaluation tools and we propose a research agenda to eventually make such integration feasible and consistent.

Abstract In the present work, a novel hybrid solar-based smart building energy system is introduced and studied. The system comprises innovative photovoltaic-thermal-cooling (PVTC) panels integrated with hot and cold storages with two-way interaction with electricity, heat, and cooling networks (if any). The proposed system is compared with PV-based systems integrated with battery and heat pump for a case study complex building in Aarhus, Denmark. The comparison is conducted by evaluating the performance and economic indicators and investigating the effect of significant parameters on each scenario via a parametric study. Furthermore, the optimal operating conditions and sizing of the proposed system are determined using the genetic algorithm method considering initial cost and traded energy with local energy networks as the objective functions. The comparison results show that the proposed solution is the most cost-effective scenario with the lowest initial cost of about 457,000 $ and a payback period of 6.6 years. This is mainly due to the simultaneous interaction with electricity/heat/cooling networks as well as the elimination of the battery and the heat pump, which are offered by the proposed scenario. It is shown that, in comparison to PV panels, the PVTC can produce 328.7 MWh and 125.6 MWh extra heat and cooling annually. The scatter distribution of significant parameters shows that the panel area and heat storage capacity are not sensitive parameters, and keeping the cold storage capacity at the lower bound is a techno-economically better option.

Abstract In this paper, we investigate the construction of markets for clean technologies by examining the mechanisms through which new technologies succeed (or fail) to be transformed into goods that are both environmentally and economically valuable. We envisage this process as a particular form of market innovation in which new product qualities are inscribed into market architectures. We focus on the market for clean technologies that emerged as a result of the EU Integrated Pollution Prevention and Control (IPPC) directive that required polluting industries, including livestock farms, to implement the “best available techniques” in order to reduce their emissions. Our case study traces a Danish start-up firm's endeavors to commercialize one such “best available technique:” a solution for reducing ammonia emissions from farms. Building on the literature on the shaping of markets, we show that the construction of a market for clean technologies hinges upon the composition of a complex network of actors with divergent, and sometimes conflicting, interests, in which market devices (in this case, a technology list) play a pivotal role. More generally, the paper contributes to discussions on controversies and performativity in market practices and on the construction of markets designed to address environmental issues.

Renewable energy has been prioritized in Danish energy policy since the early 1980s. This has led to the current situation where Denmark is one of the leading countries in the world in the field of wind energy utilization. The background for this success is a story about how a society can manage the development and diffusion of sustainable technologies so that they are simultaneously socially acceptable and environmentally benign. Consequently, this article describes the relationship between the organization of wind power and the protection of nature. The aim is to analyse which kinds of public planning and policy can promote wind power and nature protection in a situation where a conflict exists between these two issues. The discussion acknowledges that it has been a serious problem to balance these contrasting considerations. However, it also suggests that the problems seem solvable if technology development, the social organization relating to the use of the technology and proper planning are brought together to work in a spirit of local involvement. © 1998 John Wiley & Sons, Ltd. and ERP Environment