• Energy Research
• ES close
• EU close
• Energies close

We present simulations of turbulent detached flows using the commercial lattice Boltzmann solver XFlow (by Dassault Systemes). XFlow’s lattice Boltzmann formulation together with an efficient octree mesh generator reduce substantially the cost of generating complex meshes for industrial flows. In this work, we challenge these meshes and quantify the accuracy of the solver for detached turbulent flows. The good performance of XFlow when combined with a Large-Eddy Simulation turbulence model is demonstrated for different industrial benchmarks and validated using experimental data or fine numerical simulations. We select five test cases: the Backward-facing step the Goldschmied Body the HLPW-2 (2nd High-Lift Prediction Workshop) full aircraft geometry, a NACA0012 under dynamic stall conditions and a parametric study of leading edge tubercles to improve stall behavior on a 3D wing.

This article discusses the problems of exhaust gas emissions in the context of the possibility of their reduction through the use of fuels with hydrogen as an additive or hydrotreatment. These fuels, thanks to their properties, may be a suitable response to more and more demanding restrictions on exhaust emissions. The use of such fuels in reactivity controlled dual fuel engines (RCCI) is currently the most effective way of using them in internal combustion (IC) engines. Low-temperature combustion in this type of engine allows the use of all modern fuels intended for combustion engines with high thermal efficiency. Thermal efficiency higher than in classic engines allows for additional reduction of CO2 emissions. In this work, the research on this subject was compiled, and conclusions were drawn as to further possibilities of popularizing the use of these fuels in a wide spectrum of applications and the prospect of using them on a mass scale.

The accurate determination of the electrical properties of photovoltaic devices is of utmost importance to predict and optimize their overall optoelectronic performance. For example, the minority carrier lifetime and the carrier diffusion length have a strong relationship with the carrier recombination rate. Additionally, parasitic resistances have an important effect on the fill factor of a solar cell. Within this context, the alternating current (AC) and direct current (DC) electrical characteristics of Si-based metal–insulator–semiconductor (MIS) Schottky barrier diodes with the basic structure Al/Si/TiO2/NiCr were studied, aiming at using them as photovoltaic devices. The basic diode structure was modified by adding nanostructured porous silicon (nanoPS) layers and by infiltrating silver nanoparticles (AgNPs) into the nanoPS layers, leading to Al/Si+nanoPS/TiO2/NiCr and Al/Si+nanoPS+AgNPs/TiO2/NiCr structures, respectively. The AC electrical properties were studied using a combination of electrochemical impedance spectroscopy and Mott–Schottky analysis, while the DC electrical properties were determined from current–voltage measurements. From the experimental results, an AC equivalent circuit model was proposed for the three different MIS Schottky barrier diodes under study. Additionally, the most significant electrical parameters were calculated. The results show a remarkable improvement in the performance of the MIS Schottky barrier diodes upon the addition of hybrid nanoPS layers with embedded Ag nanoparticles, opening the way to their use as photovoltaic devices.

The aim of this study is to perform a review of the state-of-the-art of the reactors available in the literature, which are used for solid–gas reactions or thermal decomposition processes around 1000 °C that could be further implemented for thermochemical energy storage in CSP (concentrated solar power) plants, specifically for SPT (solar power tower) technology. Both direct and indirect systems can be implemented, with direct and closed systems being the most studied ones. Among direct and closed systems, the most used configuration is the stacked bed reactor, with the fixed bed reactor being the most frequent option. Out of all of the reactors studied, almost 70% are used for solid–gas chemical reactions. Few data are available regarding solar efficiency in most of the processes, and the available information indicates relatively low values. Chemical reaction efficiencies show better values, especially in the case of a fluidized bed reactor for solid–gas chemical reactions, and fixed bed and rotary reactors for thermal decompositions.

Global warming might be mitigated if emissions were interrupted through carbon capture technologies, as there is a significant amount of comprehensive studies on them. An outline of the main gaps and trends of a technology is critical for further development. In this context, this study provides an overview of calcium looping carbon capture processes that have proven their potential and commercial viability. A bibliometric analysis is conducted on both Scopus and Web of Science database by seeking the keywords “calcium looping”, “co2 capture”, and “fluidized bed” in titles, abstracts, and keywords. Word selection was based on a list of relevant papers on the topic. These items of data have been processed and analyzed based on the number of publications and citations by emphasizing recent publication evolution, journal influence, the use of specific keywords, and co-citation. Results reveal that the European Union (EU) leads the rankings on the topic, followed by Canada. Keyword choice might have affected the number of citations. Recent studies used limestone as a sorbent and a dual fluidized bed reactor with a calciner or resistance depending on its size. Most studies are focused on technology scale-up. Although scale-up seems to be a priority, multiple studies are designed to assess the effect of steam generation and SO2 on the process.

This paper presents a new frequency controller for variable speed wind turbines connected to the grid under power imbalance conditions. It is based on the fast power reserve emulation technique, having two different operation modes: overproduction and recovery mode. In the first mode, the active power provided by wind turbines is set over the mechanical power, reducing their rotational speed. This overproduction power is estimated according to the frequency excursion. In the second mode, the active power is established under the mechanical power to recover the initial rotational speed through a smooth trajectory. The power system considered for simulation purposes includes thermal, hydro-power and wind-power plants. The controller proposed has been evaluated under different mix-generation scenarios implemented in Matlab/Simulink. Extensive results and comparison to previous proposals are also included in the paper.