• Energy Research
• ES close
• Bioresource Technology close

One of the key bottlenecks of the economically viable production of low added value microalgal products (food supplements, feed, biofuels) is the harvesting of cells from diluted culture medium. The main goals of this work were to prepare a novel flocculation agent based on spent brewer's yeast, a brewery by-product, and to test its harvesting efficiency on freshwater Chlorella vulgaris in different environments. The yeast was first autolyzed/hydrolyzed and subsequently chemically modified with 2-chloro-N,N-diethylethylamine hydrochloride (DEAE). Second, optimal dosage of modified spent yeast (MSY) flocculant for harvesting C. vulgaris was determined in culture media of various compositions. It was found that the absence of phosphorus ions decreased (0.4 mg MSY/g biomass), while the presence of algogenic organic matter (AOM) increased (51 mg MSY/g biomass) the required dosage of flocculant as compared to complete mineral medium with phosphorus and without AOM (12 mg MSY/g biomass).

A two-stage continuous system with two stirred tank reactors in series was utilized to perform syngas fermentation using Clostridium carboxidivorans. The first bioreactor (bioreactor 1) was maintained at pH 6 to promote acidogenesis and the second one (bioreactor 2) at pH 5 to stimulate solventogenesis. Both reactors were operated in continuous mode by feeding syngas (CO:CO2:H2:N2; 30:10:20:40; vol%) at a constant flow rate while supplying a nutrient medium at different flow rates of 8.1, 15, 22 and 30 ml/h. A cell recycling unit was added to bioreactor 2 in order to recycle the cells back to the reactor, maintaining the OD600 around 1 in bioreactor 2 throughout the experimental run. When comparing the flow rates, the best results in terms of solvent production were obtained with a flow rate of 22 ml/h, reaching the highest average outlet concentration for alcohols (1.51 g/L) and the most favorable alcohol/acid ratio of 0.32.

Three Microbial Fuel Cells (MFCs) were fluidically connected in series, with a single feed-line going into the 1st column through the 2nd column and finally as a single outflow coming from the 3rd column. Provision was also made for re-circulation in a loop (the outflow from the 3rd column becoming the feed-line into the 1st column) in order to extend the hydraulic retention time (HRT) on treatment of landfill leachate. The effect of increasing the electrode surface area was also studied whilst the columns were (fluidically) connected in series. An increase in the electrode surface area from 360 to 1080 cm(2) increased the power output by 118% for C2, 151% for C3 and 264% for C1. COD and BOD(5) removal efficiencies also increased by 137% for C1, 279% for C2 and 182% for C3 and 63% for C1, 161% for C2 and 159% for C3, respectively. The system when configured into a loop was able to remove 79% of COD and 82% of BOD(5) after 4 days. These high levels of removal efficiency demonstrate the MFC system's ability to treat leachate with the added benefit of generating energy.

The chemical and petrochemical industries produce wastewaters containing ammonium and phenolic compounds. Biological treatment of these wastewaters could be problematic due to the possible inhibitory effects exerted by phenolic compounds. The feasibility of performing simultaneous nitritation and p-nitrophenol (PNP) biodegradation using a continuous aerobic granular reactor was evaluated. A nitrifying granular sludge was bioaugmented with a PNP-degrading floccular sludge, while PNP was progressively added to the feed containing a high ammonium concentration. Nitritation was sustained throughout the operational period with ca. 85% of ammonium oxidation and less than 0.3% of nitrate in the effluent. PNP biodegradation was unstable and the oxygen limiting condition was found to be the main explanation for this unsteadiness. An increase in dissolved oxygen concentration from 2.0 to 4.5 mg O2 L(-1) significantly enhanced PNP removal, achieving total elimination. Acinetobacter genus and ammonia-oxidising bacteria were the predominant bacteria species in the granular biomass.

The dynamics of microalgae population during piggery wastewater (PWW) treatment in four open photobioreactors operated at 27days of hydraulic retention time, and inoculated with Chlorella sp. (R1), Acutodesmus obliquus (R2), Oscillatoria sp. (R3) and in the absence of inoculum (R4), were evaluated for 6months. In addition, the algal-bacterial biomass concentration, removal of organic matter, nutrients and heavy metals were also assessed. The results revealed a high diversity and rapid variations in the structure of microalgae populations, Chlorella sp. being dominant in R4 throughout most of the operational period. Steady state average biomass concentration ranged from 2445-2610mg/L in R1-R3 to 3265mg/L in R4. No significant differences were recorded in the removal efficiencies (REs) of total organic carbon (86-87%), inorganic carbon (62-71%), total nitrogen (82-85%) and total phosphorous (90-92%). Finally, Zn-REs accounted for 26% in R3, 37% in R2, and 49% in R1 and R4.

The aim of this work is to ascertain the potentials of different agroforestry wastes to be used as biosorbents in the removal of a mixture of heavy metals. Fern (FE), rice husk (RI) and oak leaves (OA) presented the best removal percentages for Cu(II) and Ni(II), Mn(II) and Zn(II) and Cr(VI), respectively. The performance of a mixture of these three biosorbents was evaluated, and an improvement of 10% in the overall removal was obtained (19.25mg/g). The optimum mixture proportions were determined using simplex-centroid mixture design method (FE:OA:RI=50:13.7:36.3). The adsorption kinetics and isotherms of the optimised mixture were fit by the pseudo-first order kinetic model and Langmuir isotherm. The adsorption mechanism was studied, and the effects of the carboxylic, hydroxyl and phenolic groups on metal-biomass binding were demonstrated. Finally, the recoveries of the metals using biomass were investigated, and cationic metal recoveries of 100% were achieved when acidic solutions were used.

The catalytic activities of calcium oxide obtained from natural sources (crab shell and eggshell) were characterized and evaluated in the transesterification of vegetable oil. These catalysts are mainly composed of calcium carbonate, which is partially converted into CaO after calcination (900°C for 2h). The catalysts have some advantages, such as abundant occurrence, low cost, porous structure, and nontoxic. The materials were characterized by XRD, FTIR, TG/DTG, CO2-TPD, XPS, SEM, and BET methods. The thermal treatment produces small particles of CaCO3 and CaO that are responsible for the catalytic activity. The conversion from triglycerides to methyl ester was not observed in transesterification carried out using natural crab shell and eggshell. Under optimized reaction conditions, the conversions to YFAME using the calcined catalysts were: crab shell (83.10±0.27 wt.%) and eggshell (97.75±0.02 wt.%). These results, showed that these materials have promising viability in transesterification for biodiesel production.

The objective of this study was to evaluate the performance of an outdoor membrane-coupled high-rate algal pond equipped with industrial-scale membranes for treating urban wastewater. Decoupling biomass retention time (BRT) and hydraulic retention time (HRT) by membrane filtration resulted in improved process efficiencies, with higher biomass productivities and nutrient removal rates when operating at low HRTs. At 6 days of BRT, biomass productivity increased from 30 to 66 and to 95 g·m-3·d-1 when operating at HRTs of 6, 4 and 2.5 days, respectively. The corresponding nitrogen removal rates were 4, 8 and 11 g N·m-3·d-1 and the phosphorous removal rates were 0.5, 1.3 and 1.6 g P·m-3·d-1. The system was operated keeping moderate specific air demands (0.25 m3·m-2·h-1), resulting in reasonable operating and maintenance costs (€0.04 per m3) and energy requirements (0.29 kWh per m3). The produced water was free of pathogens and could be directly used for reusing purposes.