• Energy Research
• 2021-2025close
• Restricted close
• Open Source close
• Embargo close
• ES close

[EN] The objective of this article is to compare the behaviour of the most representative domestic hot water systems (DHW) in single-family buildings. The study evaluates the energy consumption, equivalent CO2 emissions and cost for each system over a 15-year life period. This analysis is carried out in four cli- matic zones across Europe to observe the influence of climatic conditions on the results. The four climatic zones are located in the cities of Athens, Madrid, London and Berlin. The analysed systems are: a) natural gas-fired instantaneous water heaters, b) electric storage water heater, c) solar thermal system with gas- fired instantaneous, d) solar thermal system with electric storage water heater, e) air-source heat pump, f) photovoltaic system with electric storage water heater, and g) photovoltaic system with air-source heat pump. This range of technologies covers the most likely solutions to be implemented across domestic buildings in Europe.The heat pump system (HPWH) with PV considering self-consumption shows the lowest environmen- tal impact in all zones, but is not an attractive investment in the coldest zones due to lower natural gas prices. Thermal solar systems have a high purchase and maintenance costs which do not compensate their energy savings. The PV HPWH system has a greater reduction of emissions and a lower cost than HPWH across a 15-year life. The gas boiler system has the lowest cost in a 15-year period in the coldest areas, despite having a greater environmental impact than the heat pump.(c) 2023 Elsevier B.V. All rights reserved.

[EN] The objective of this article is to compare the behaviour of the most representative domestic hot water systems (DHW) in single-family buildings. The study evaluates the energy consumption, equivalent CO2 emissions and cost for each system over a 15-year life period. This analysis is carried out in four cli- matic zones across Europe to observe the influence of climatic conditions on the results. The four climatic zones are located in the cities of Athens, Madrid, London and Berlin. The analysed systems are: a) natural gas-fired instantaneous water heaters, b) electric storage water heater, c) solar thermal system with gas- fired instantaneous, d) solar thermal system with electric storage water heater, e) air-source heat pump, f) photovoltaic system with electric storage water heater, and g) photovoltaic system with air-source heat pump. This range of technologies covers the most likely solutions to be implemented across domestic buildings in Europe.The heat pump system (HPWH) with PV considering self-consumption shows the lowest environmen- tal impact in all zones, but is not an attractive investment in the coldest zones due to lower natural gas prices. Thermal solar systems have a high purchase and maintenance costs which do not compensate their energy savings. The PV HPWH system has a greater reduction of emissions and a lower cost than HPWH across a 15-year life. The gas boiler system has the lowest cost in a 15-year period in the coldest areas, despite having a greater environmental impact than the heat pump.(c) 2023 Elsevier B.V. All rights reserved.

The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system.

The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system.

Thermokinetics of Biochar production.

Thermokinetics of Biochar production.

Common hornbeam (Carpinus betulus) is one of the most important spring pollen allergens widespread in the Czech Republic. This study evaluates the changes in Carpinus betulus flowering and the length of the blooming period in the Czech Republic during 1991-2020. Temporal and spatial evaluations in the timing of the flowering and the length of the blooming period were investigated at different altitudinal levels. Moreover, the changes in mean air temperature and precipitation total in spring months (March-April-May) were assessed, including the correlation with phenological data. Geographic Information System methods, the Mann-Kendall test and Pearson's correlation coefficient were used for processing. The flowering of Carpinus betulus changed significantly over time during the 1991-2020 period. The linear models predicted early flowering in Carpinus betulus at different altitudes (27 days at > 701 m 18 days at 501-700 m and 13 days at 301-500 m) significantly (p<0.001) over the last three decades. Furthermore, the length of the blooming period of Carpinus betulus has been shortened (4 days) at the 301-500 m a.s.l. altitudinal level significantly (p<0.05). The strongest correlation was predominantly observed between flowering and the mean air temperature (March-April-May).

Common hornbeam (Carpinus betulus) is one of the most important spring pollen allergens widespread in the Czech Republic. This study evaluates the changes in Carpinus betulus flowering and the length of the blooming period in the Czech Republic during 1991-2020. Temporal and spatial evaluations in the timing of the flowering and the length of the blooming period were investigated at different altitudinal levels. Moreover, the changes in mean air temperature and precipitation total in spring months (March-April-May) were assessed, including the correlation with phenological data. Geographic Information System methods, the Mann-Kendall test and Pearson's correlation coefficient were used for processing. The flowering of Carpinus betulus changed significantly over time during the 1991-2020 period. The linear models predicted early flowering in Carpinus betulus at different altitudes (27 days at > 701 m 18 days at 501-700 m and 13 days at 301-500 m) significantly (p<0.001) over the last three decades. Furthermore, the length of the blooming period of Carpinus betulus has been shortened (4 days) at the 301-500 m a.s.l. altitudinal level significantly (p<0.05). The strongest correlation was predominantly observed between flowering and the mean air temperature (March-April-May).