• Energy Research
• 7. Clean energy close
• IT close
• EU close
• AT close

-

Dielectric and anelastic spectroscopies are complementary techniques and their combination allows valuable information to be obtained in the field of multifunctional materials. Whereas the dielectric spectroscopy measures the dielectric susceptibility ?(?,T) and it is sensitive to fluctuations of electric dipoles, the anelastic spectroscopy measures the elastic compliance or elastic susceptibility s(?,T) and it is sensitive to fluctuations of elastic dipoles. Both susceptibilities are complex, their immaginary part being due to the delayed response of the mobile defects coupled to the electric field/stress. The great advantage of using a combination of both techniques is that the anelastic measurements are insensitive to free charges, therefore it is possible to measure the dynamics of ions also in the presence of free charges. Two main types of investigations have been pursued by the combination of these techniques: the study of structural phase transitions and the study of microscopic mechanisms associated with the presence of defects, both important for the knowledge and development of multifunctional materials. We have applied this approach for different functional materials with perovskite framework: multiferroic, ferroelectric and relaxor ferroelectric ceramics, and organic-inorganic perovskite photovoltaics. Thanks to the combination of the two spectroscopies, it has been possible to probe more accurately the structural transitions involving the antiferrodisortive tilt modes of the octahedra in PZT [1] and NBT-BT [2]. It was also possible to evidence incipient phase separation in lead titanate-based multiferroics [3]. Moreover, since the elastic response is insensitive to free charges, it has been used to probe the piezoelectric response even in unpoled ceramics [4] and for the study of coexisting ferroelectric and metallic states [5]. The combination of the two techniques allowed also new features to be revealed on the reorientation dynamics of the organic molecules in MAPbI3 photovoltaic organic-inorganic perovskites and the hindrance of their ferroelectric order by coupling with the tilt modes [6]. 1. F. Cordero, F. Trequattrini, F. Craciun, C. Galassi, Phys. Rev. B, 87 (2013) 094108 2. F. Cordero, F. Craciun, F. Trequattrini, et al., Phys. Rev. B, 81 (2010) 144124 3. F. Craciun, F. Cordero, B. Vasile, et al., Phys. Chem. Chem. Phys., 20 (2018) 14652 4. F. Cordero, F. Craciun, F. Trequattrini, C. Galassi, Phys. Rev. B, 93 (2016) 174111 5. F. Cordero, F. Trequattrini, F. Craciun, et al., Phys. Rev. B, 99 (2019) 064106 6. F. Cordero, F. Craciun, F. Trequattrini, et al., J. Phys. Chem. Lett., 9 (2018) 4401

Dolomite-based binders are characterised by interesting technical and environmental features. For their synthesis, sources of both CaO and MgO are required. The idea developed in this work is to couple the synthesis of dolomite-based binders, starting from a natural dolomite, through the concept of concentrated solar energy (needed to drive the endothermal dolomite calcination process) in fluidised bed reactors. To this end, a fluidised bed system, where the concentrated solar radiation is mimicked by the use of Xe-lamps (short-arc), has been set up and operated. Natural dolomite (sieved in the 420-590 ?m size range) was calcined at a nominal temperature of 850 °C, and bed temperature profiles during solar-driven calcination were investigated. Then, four binders were prepared by mixing slaked dolomite (obtained from the hydration of solar calcined dolomite) with either blast furnace slag or coal fly ash as supplementary cementitious materials. The binders were hydrated for curing times ranging from 7 to 56 days. X-ray fluorescence, X-ray diffraction and combined differential thermal and thermogravimetric analyses were employed as characterisation techniques both to analyse the chemical composition of starting materials and to investigate the evolution of the hydration in the four systems.

The greenhouse gas (GHG) emissions, expressed in carbon dioxide equivalents (CO2-eq), of different Austrian biogas systems were analyzed and evaluated using life-cycle assessment (LCA) as part of a national project. Six commercial biogas plants were investigated and the analysis included the complete process chain: viz., the production and collection of substrates, the fermentation of the substrates in the biogas plant, the upgrading of biogas to biomethane (if applicable) and the use of the biogas or biomethane for heat and electricity or as transportation fuel. Furthermore, the LCA included the GHG emissions of construction, operation and dismantling of the major components involved in the process chain, as well as the use of by-products (e.g. fermentation residues used as fertilizers). All of the biogas systems reduced GHG emissions (in CO2-eq) compared with fossil reference systems. The potential for GHG reduction of the individual biogas systems varied between 60% and 100%. Type of feedstock and its reference use, agricultural practices, coverage of storage tanks for fermentation residues, methane leakage at the combined heat and power plant unit and the proportion of energy used as heat were identified as key factors influencing the GHG emissions of anaerobic digestion processes.

Pervasive computing and business process modeling are increasingly joining forces, as mobile human users shall be seamlessly integrated into business processes. In respective scenarios, humans use mobile devices and wireless technology to interact with workflows running in a powerful back-end infrastructure. However, the frequent interaction between humans and workflows causes a high communication overhead and, thus, high energy consumption on mobile devices. This impacts the usability and efficiency of the business process due to rapidly drained batteries and the resulting short life-times of the devices and applications. We present an approach based on a minimum-cut algorithm for reducing costly data transmissions during workflow execution by distributing parts of a workflow to the users' devices. Our motivation is to reduce the energy consumption on the mobile devices and, thus, avoid draining batteries in the field. We prove that our algorithm finds the optimal solution for a given network and workflow, decreasing the energy consumed on mobile devices by 32-37% compared to an approach where the entire workflow is executed in the infrastructure. Thus, in typical domains like logistics and health care, one third of the energy can be saved. This either means that devices have to be charged less frequently, leading to less distraction in the business process, or that mobile device specifications can be lowered. Significant cost reductions result in both cases.

After a halt of four years, the n TOF spallation neutron facility at CERN has resumed operation in November 2008 with a new spallation target characterized by an improved safety and engineering design, resulting in a more robust overall performance and e cient cooling. The rst measurement during the 2009 run has aimed at the full characterization of the neutron beam. Several detectors, such as calibrated ssion chambers, the n TOF Silicon Monitor, a Mi- croMegas detector with 10B and 235U samples, as well as liquid and solid scintillators have been used in order to characterize the properties of the neutron uence. The spatial pro le of the beam has been studied with a specially designed \X-Y

Purpose This paper aims to investigate the current energy status in the West Balkan countries and the related perspectives for renewable energy sources (RES) cooperation mechanisms, within the framework of RES Directive 2009/28/European Commission (EC), through the elaboration of a SWOT (strengths, weaknesses, opportunities, threats) analysis. Particular emphasis is laid on the case of Bosnia-Herzegovina, Croatia and Serbia. The SWOT analysis provides a clearer view of expanding RES in the West Balkans, as well as the level of utilization and potential of cooperation mechanisms and renewable energy in each country. Design/methodology/approach The adopted approach is mainly based on the context of a project co-financed by the Intelligent Energy Europe Programme, titled “Bringing Europe and Third countries closer together through renewable Energies (BETTER)” (project number: IEE/11/845/SI2.616378). The adopted approach incorporates the steps of desktop analysis, stakeholders’ mapping and engagement, key factors’ identification and analysis of results. Findings The barriers to expand RES in the region are significant. Currently, the region is electricity importer and by far not in the position to efficiently exploit the large RES potentials. It remains to be seen whether and to what extent cooperation mechanisms may be used in the Western Balkans and the EU by 2020. The unification of the fragmented electricity system and market-oriented reforms aim to join regional power markets and then to integrate with the European Union power market. There is a multitude of market barriers for RES, resulting in a high risk perception n by investors. Cooperation mechanisms could strengthen the regions’ policy frameworks and be a starting point to integrate the region’s energy systems and to overcome the fragmentation of the past two decades. Originality/value The potential of West Balkan countries to make use of the cooperation mechanisms provides opportunities for RES exporting between West Balkan and other European countries. An analysis of these opportunities for cooperation will allow drawing clearer conclusions on cooperation potentials and business cases for the region.