• Energy Research
• Open Source close
• Embargo close
• engineering and technology close
• AT close
• EU close

Abstract Turkey is currently in the middle of its sixth attempt over the last 60 years to introduce nuclear power. This paper analyzes Turkey’s past and present motivation, capacity and strategies to identify the factors which influence deployment of nuclear power and draw lessons for other nuclear newcomer countries. While existing literature points to a correlation between nuclear power, strong state involvement, centralized energy planning and the rhetoric linking energy to national prestige and security, we show that these factors are not sufficient for a successful nuclear program. We also show that autocratic rule and nuclear weapons aspirations can undermine rather than support the development of civilian nuclear power as it is often presumed in the literature. Turkey’s current strategy based on intergovernmental agreements with Russia and Japan is laced with irony since it is motivated by energy security considerations and yet relies on foreign entities for construction, ownership and operation of nuclear power plants as well as the development of human capacity. Although Ankara intends to build the third nuclear power plant with own resources this seems unlikely based on the South Korean and Japanese experience, both of which needed much more time and effort to localize the industry.

Abstract Turkey is currently in the middle of its sixth attempt over the last 60 years to introduce nuclear power. This paper analyzes Turkey’s past and present motivation, capacity and strategies to identify the factors which influence deployment of nuclear power and draw lessons for other nuclear newcomer countries. While existing literature points to a correlation between nuclear power, strong state involvement, centralized energy planning and the rhetoric linking energy to national prestige and security, we show that these factors are not sufficient for a successful nuclear program. We also show that autocratic rule and nuclear weapons aspirations can undermine rather than support the development of civilian nuclear power as it is often presumed in the literature. Turkey’s current strategy based on intergovernmental agreements with Russia and Japan is laced with irony since it is motivated by energy security considerations and yet relies on foreign entities for construction, ownership and operation of nuclear power plants as well as the development of human capacity. Although Ankara intends to build the third nuclear power plant with own resources this seems unlikely based on the South Korean and Japanese experience, both of which needed much more time and effort to localize the industry.

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

Abstract Latest trends in the photovoltaic sector see the use of innovative photovoltaic technologies with extended spectral responsivity ranging from 300 to 1200 nm for non-concentrating terrestrial applications, and to 1800 nm for concentrating PV and space applications. As a consequence, an update of the IEC 60904-9 standard is ongoing with a definition of new spectral ranges for the assessment of the spectral match. This poses new challenges to laboratories and research centers on whether or not they still are able to accurately measure the spectral mismatch of their sun simulator in the newly-defined spectral regions. Prior to that, there is a need to understand if the commercially available spectroradiometers are ready to extend their measurement range as prescribed by the forthcoming new standard. This paper analyses two options for an extension of the spectrum characterisation of solar simulators to 300–1200 nm and compares them in terms of spectral match of global normal irradiance (GNI) spectra acquired under natural sunlight by eight spectroradiometers during the 6th European Spectroradiometer Intercomparison. The acquired spectra are also compared in terms of an index of consistency of the spread of the measured spectra with the estimated measurement uncertainty, hereafter named as performance statistics E n . Results show that all investigated laboratories assure the equivalence of the spectral match classification well below the 25% limit corresponding to class-A simulators. When considering the more stringent class-A+ corresponding to a 12.5% limit, one of the two considered options that rearranges the 300–1200 nm spectral range into 6 bands appears to still assure the equivalence of the class A+ limits among considered instruments. The E n performance index analysis highlights some inconsistencies with the estimated measurement uncertainty or instrument drifts from the expected performance, and the need of further improvements in calibration, set up and measurement procedures.

Abstract Latest trends in the photovoltaic sector see the use of innovative photovoltaic technologies with extended spectral responsivity ranging from 300 to 1200 nm for non-concentrating terrestrial applications, and to 1800 nm for concentrating PV and space applications. As a consequence, an update of the IEC 60904-9 standard is ongoing with a definition of new spectral ranges for the assessment of the spectral match. This poses new challenges to laboratories and research centers on whether or not they still are able to accurately measure the spectral mismatch of their sun simulator in the newly-defined spectral regions. Prior to that, there is a need to understand if the commercially available spectroradiometers are ready to extend their measurement range as prescribed by the forthcoming new standard. This paper analyses two options for an extension of the spectrum characterisation of solar simulators to 300–1200 nm and compares them in terms of spectral match of global normal irradiance (GNI) spectra acquired under natural sunlight by eight spectroradiometers during the 6th European Spectroradiometer Intercomparison. The acquired spectra are also compared in terms of an index of consistency of the spread of the measured spectra with the estimated measurement uncertainty, hereafter named as performance statistics E n . Results show that all investigated laboratories assure the equivalence of the spectral match classification well below the 25% limit corresponding to class-A simulators. When considering the more stringent class-A+ corresponding to a 12.5% limit, one of the two considered options that rearranges the 300–1200 nm spectral range into 6 bands appears to still assure the equivalence of the class A+ limits among considered instruments. The E n performance index analysis highlights some inconsistencies with the estimated measurement uncertainty or instrument drifts from the expected performance, and the need of further improvements in calibration, set up and measurement procedures.

Fossil fuel substitution with biomass is one of the measures to reduce carbon dioxide (CO2) emissions. This paper estimates the cost-effectiveness of raising industrial steam and producing materials (i.e. chemicals, polymers) from biomass. We quantify their long-term global potentials in terms of energy saving, CO2 emission reduction, cost and resource availability. Technically, biomass can replace all fossil fuels used for the production of materials and for generating low and medium temperature steam. Cost-effective opportunities exist for steam production from biomass residues and by substitution of high value petrochemicals which would together require more than 20 exajoules (EJ) of biomass worldwide in addition to baseline by 2030. Potentials could double in 2050 and reach 38-45 EJ (25% of the total industrial energy use), with most demand in Asia, other developing countries and economies in transition. The economic potential of using biomass as chemical feedstock is nearly as high as for steam production, indicating its importance. The exploitation of these potentials depends on energy prices and industry's access to biomass supply. Given the increasing competition for biomass from several economic sectors, more resource efficient materials need to be developed while steam production is already attractive due to its high effectiveness for reducing CO2 emissions per unit of biomass.

Fossil fuel substitution with biomass is one of the measures to reduce carbon dioxide (CO2) emissions. This paper estimates the cost-effectiveness of raising industrial steam and producing materials (i.e. chemicals, polymers) from biomass. We quantify their long-term global potentials in terms of energy saving, CO2 emission reduction, cost and resource availability. Technically, biomass can replace all fossil fuels used for the production of materials and for generating low and medium temperature steam. Cost-effective opportunities exist for steam production from biomass residues and by substitution of high value petrochemicals which would together require more than 20 exajoules (EJ) of biomass worldwide in addition to baseline by 2030. Potentials could double in 2050 and reach 38-45 EJ (25% of the total industrial energy use), with most demand in Asia, other developing countries and economies in transition. The economic potential of using biomass as chemical feedstock is nearly as high as for steam production, indicating its importance. The exploitation of these potentials depends on energy prices and industry's access to biomass supply. Given the increasing competition for biomass from several economic sectors, more resource efficient materials need to be developed while steam production is already attractive due to its high effectiveness for reducing CO2 emissions per unit of biomass.

National net zero emission targets could, if fully implemented, reduce best estimates of projected global average temperature increase to 2.0–2.4 °C by 2100, bringing the Paris Agreement temperature goal within reach. A total of 131 countries are discussing, have announced or have adopted net zero targets, covering 72% of global emissions. These targets could substantially lower projected warming as compared to currently implemented policies (2.9–3.2 °C) or pledges submitted to the Paris Agreement (2.4–2.9 °C). Current pledges for emissions cuts are insufficient to meet the Paris Agreement temperature goal. The wave of net zero targets being discussed and adopted could make the Paris goal possible if further countries follow suit.

National net zero emission targets could, if fully implemented, reduce best estimates of projected global average temperature increase to 2.0–2.4 °C by 2100, bringing the Paris Agreement temperature goal within reach. A total of 131 countries are discussing, have announced or have adopted net zero targets, covering 72% of global emissions. These targets could substantially lower projected warming as compared to currently implemented policies (2.9–3.2 °C) or pledges submitted to the Paris Agreement (2.4–2.9 °C). Current pledges for emissions cuts are insufficient to meet the Paris Agreement temperature goal. The wave of net zero targets being discussed and adopted could make the Paris goal possible if further countries follow suit.