• Energy Research
• Open Access close
• Open Source close
• 13. Climate action close
• GB close
• IT close
• EU close

Climate change is a global problem, which affects the various geographical regions at different levels. It is also associated with a wide range of human health problems, which pose a burden to health systems, especially in regions such as Africa. Indeed, across the African continent public health systems are under severe pressure, partly due to their fragile socioeconomic conditions. This paper reports on a cross-sectional study in six African countries (Ghana, Nigeria, South Africa, Namibia, Ethiopia, and Kenya) aimed at assessing their vulnerabilities to climate change, focusing on its impacts on human health. The study evaluated the levels of information, knowledge, and perceptions of public health professionals. It also examined the health systems’ preparedness to cope with these health hazards, the available resources, and those needed to build resilience to the country’s vulnerable population, as perceived by health professionals. The results revealed that 63.1% of the total respondents reported that climate change had been extensively experienced in the past years, while 32% claimed that the sampled countries had experienced them to some extent. Nigerian respondents recorded the highest levels (67.7%), followed by Kenya with 66.6%. South Africa had the lowest level of impact as perceived by the respondents (50.0%) when compared with the other sampled countries. All respondents from Ghana and Namibia reported that health problems caused by climate change are common in the two countries. As perceived by the health professionals, the inadequate resources reiterate the need for infrastructural resources, medical equipment, emergency response resources, and technical support. The study’s recommendations include the need to improve current policies at all levels (i.e., national, regional, and local) on climate change and public health and to strengthen health professionals’ skills. Improving the basic knowledge of health institutions to better respond to a changing climate is also recommended. The study provides valuable insights which may be helpful to other nations in Sub-Saharan Africa.

The decarbonisation of heating in the United Kingdom is likely to entail both the mass adoption of heat pumps and widespread development of district heating infrastructure. Estimation of the spatially disaggregated heat demand is needed for both electrical distribution network with electrified heating and for the development of district heating. The temporal variation of heat demand is important when considering the operation of district heating, thermal energy storage and electrical grid storage. The difference between the national and urban heat demands profiles will vary due to the type and occupancy of buildings leading to temporal variations which have not been widely surveyed. This paper develops a high-resolution spatiotemporal heat load model for Great Britain (GB: England, Scotland a Wales) by identifying the appropriate datasets, archetype segmentation and characterisation for the domestic and nondomestic building stock. This is applied to a thermal model and calibrated on the local scale using gas consumption statistics. The annual GB heat demand was in close agreement with other estimates and the peak demand was 219 GWth. The urban heat demand was found to have a lower peak to trough ratio than the average national demand profile. This will have important implications for the uptake of heating technologies and design of district heating.

AbstractSolar fuels offer a promising approach to provide sustainable fuels by harnessing sunlight1,2. Following a decade of advancement, Cu2O photocathodes are capable of delivering a performance comparable to that of photoelectrodes with established photovoltaic materials3–5. However, considerable bulk charge carrier recombination that is poorly understood still limits further advances in performance6. Here we demonstrate performance of Cu2O photocathodes beyond the state-of-the-art by exploiting a new conceptual understanding of carrier recombination and transport in single-crystal Cu2O thin films. Using ambient liquid-phase epitaxy, we present a new method to grow single-crystal Cu2O samples with three crystal orientations. Broadband femtosecond transient reflection spectroscopy measurements were used to quantify anisotropic optoelectronic properties, through which the carrier mobility along the [111] direction was found to be an order of magnitude higher than those along other orientations. Driven by these findings, we developed a polycrystalline Cu2O photocathode with an extraordinarily pure (111) orientation and (111) terminating facets using a simple and low-cost method, which delivers 7 mA cm−2 current density (more than 70% improvement compared to that of state-of-the-art electrodeposited devices) at 0.5 V versus a reversible hydrogen electrode under air mass 1.5 G illumination, and stable operation over at least 120 h.

Pyroelectric energy harvesting has the ability to transform wasted heat into useful energy and as such has a potential to create “green” energy from freely available sources such as ambient temperature changes, and contribute to the fight against climate change. Current pyroelectrics applications are limited to low-power electronics, portable systems or tasks needing only very low range of power (μW–mW). Developing further this highly promising technology should ultimately lead to the creation of more powerful, autonomous and self-powered electronic devices that could one day use to recycle currently “lost” thermal energy to power electronic devices in both domestic and industrial settings. To the best of our knowledge, hexagonal phase ZnS (wurtzite ZnS) has not been studied as a possible energy harvesting pyroelectric material despite w-ZnS being isostructural to the well-exploited and widely praised hexagonal ZnO [1]. In addition, the Tc temperature (1020 ˚C for bulk material) is high enough for ZnS that it has the ability to operate at higher temperature that are good match with the working temperature of power plants and automobiles, and hence w-ZnS ceramics should have a potential to be used in pyroelectric harvesters of waste heat coming from those activities [2]. Here we report on the pyroelectric output registered for a wurtzite phase ZnS ceramic fabricated as part of our project. To probe the pyroelectric output for a w-ZnS ceramic a simple device (a “pyro-cell”) was created by evaporating gold electrods on both sides of a ceramic sample, which was mounted on a Cu-metalized rectangular insulating base (vetronite) using silver paint. This device is stable from room temperature up to approximately 180°C. Two different heating and cooling testing set-ups were established: Set-up n°1 used an industrial scale laser, providing a source with fast temperature change, and Set-up n°2 had a standard lab hot plate heating element, providing a much slower temperature change. The characterization required an accurate measurement of the currents of the order of 10-9 A. In addition, using the Pyroelectric Test System (PK‐SPIV17T, State College, PA, USA) with a Keithley 6517 B Picoammeter, we were able to measure the pyroelectric coefficient and monitor its change at different frequencies as a function of temperature from 20 °C up to 150° C, with a heating rate of between 2 and 10 °C/min. Figure 1: Pyroelectric current measurements on an ZnS ceramic sample, using testing set-up n°1. The horizontal axis shows the time (seconds). References [1] Y. Yang, W. Guo, K.C. Pradel, G. Zhu, Y. Zhou, Y. Zhang, Y. Hu, L. Lin, Z. Lin Wang, “Pyroelectric Nanogenerators for Harvesting Thermoelectric Energy”, Nano Lett, 12 (6), 2012, 2833–2838 [2] L.A. Chavez, F.O. Zayas Jimenez, B.R. Wilburn, L.C. Delfin, H. Kim, N. Love, Y. Lin, “Characterization of Thermal Energy Harvesting Using Pyroelectric Ceramics at Elevated Temperatures”, Energy Harvesting and Systems, 5(1-2), 2018, 3–10 This project was also partially supported by the Piano triennale di realizzazione 2019-2021 della ricerca di sistema elettrico nazionale – Progetto 1.3 Materiali di frontiera per usi energetici (C.U.P. code: I34I19005780001).

Le Pakistan traverse une crise énergétique terrifiante et dévastatrice. Récemment, la prévision de la consommation d'énergie s'est intensifiée par rapport à sa capacité de production, ce qui est problématique pour la stabilité sociale et économique du Pakistan. Par conséquent, il est essentiel d'examiner le lien entre la consommation d'électricité, les prix de l'électricité, la transition urbaine, les autres utilisations d'électricité et l'expansion économique de 1970 à 2018 au Pakistan. Pour l'analyse, la technique économétrique de deuxième génération de Lee et Strazicich (2013), le nouveau Augmented Autoregressive Distributed Lag (AARDL) et Frequency Domain Causality (FDC) est utile pour détecter l'association à moyen et à court terme entre les variables. Les résultats montrent que la consommation d'électricité stimule l'expansion économique à court et à long terme, bien que la hausse des prix de l'électricité diminue l'activité économique à court et à long terme. En outre, la transition urbaine et d'autres utilisations de l'électricité ont un impact positif et négatif substantiel sur l'expansion économique à court et à long terme. Le résultat suggère qu'un approvisionnement énergétique efficace, des prix de l'énergie à faible coût, une bonne gestion de la transition urbaine et d'autres utilisations de l'énergie pourraient être utiles aux décideurs pour atteindre les ODD 7 et 11 au Pakistan. Pakistán se encuentra en una crisis energética aterradora y devastadora. Recientemente, la predicción del consumo de energía se ha intensificado en comparación con su capacidad de producción, lo que es problemático para la estabilidad social y económica de Pakistán. Por lo tanto, es vital examinar el vínculo entre el consumo de energía, los precios de la energía, la transición urbana, otros usos de la electricidad y la expansión económica de 1970 a 2018 en Pakistán. Para el análisis, la técnica econométrica de segunda generación de Lee y Strazicich (2013), el novedoso Retraso Distribuido Autoregresivo Aumentado (AARDL) y la Causalidad en el Dominio de la Frecuencia (FDC) son útiles para detectar la asociación a largo y corto plazo entre las variables. Los resultados muestran que el consumo de energía estimula la expansión económica a corto y largo plazo, aunque el aumento de los precios de la energía disminuye la actividad económica a corto y largo plazo. Además, la transición urbana y otros usos de la electricidad tienen un impacto positivo y negativo sustancial en la expansión económica a corto y largo plazo. El resultado sugiere que el suministro eficiente de energía, los precios de la energía de bajo coste, la gestión adecuada de la transición urbana y otros usos de la energía podrían ser útiles para que los responsables políticos alcancen los ODS 7 y 11 en Pakistán. Pakistan is in a terrifying and devastating energy crisis. Recently, the prediction for energy consumption has intensified compared to its production capacity, which is problematic for Pakistan's social and economic stability. Hence, it is vital to examine the link between power consumption, power prices, urban transition, other electricity use, and economic expansion from 1970 to 2018 in Pakistan. For analysis, the second-generation econometric technique of Lee and Strazicich (2013), novel Augmented Autoregressive Distributed Lag (AARDL), and Frequency Domain Causality (FDC) is useful to detect the long-medium and short-run association among the variables. The results show that power consumption stimulates economic expansion in the short and long-run, though the rise in power prices declines economic activity in the short and long-run. Also, urban transition and other electricity use are a substantial positive and negative impact on economic expansion in the short and long-run. The outcome suggests that efficient energy supply, low-cost power prices, proper urban transition management, and other energy use could be useful for policymakers to achieve SDGs 7 and 11 in Pakistan. باكستان في أزمة طاقة مرعبة ومدمرة. في الآونة الأخيرة، تكثف التنبؤ باستهلاك الطاقة مقارنة بقدرته الإنتاجية، مما يمثل مشكلة للاستقرار الاجتماعي والاقتصادي لباكستان. وبالتالي، من الضروري دراسة الصلة بين استهلاك الطاقة وأسعار الطاقة والتحول الحضري واستخدام الكهرباء الأخرى والتوسع الاقتصادي من 1970 إلى 2018 في باكستان. للتحليل، فإن تقنية الاقتصاد القياسي من الجيل الثاني من Lee and Strazicich (2013)، والتأخر الموزع الانحداري الذاتي المعزز (AARDL)، وسببية مجال التردد (FDC) مفيدة للكشف عن الارتباط طويل المدى وقصير المدى بين المتغيرات. تظهر النتائج أن استهلاك الطاقة يحفز التوسع الاقتصادي على المدى القصير والطويل، على الرغم من أن ارتفاع أسعار الطاقة يؤدي إلى انخفاض النشاط الاقتصادي على المدى القصير والطويل. كما أن التحول الحضري والاستخدامات الأخرى للكهرباء لها تأثير إيجابي وسلبي كبير على التوسع الاقتصادي على المدى القصير والطويل. تشير النتيجة إلى أن إمدادات الطاقة الفعالة، وأسعار الطاقة منخفضة التكلفة، وإدارة الانتقال الحضري المناسبة، وغيرها من استخدامات الطاقة يمكن أن تكون مفيدة لصانعي السياسات لتحقيق هدفي التنمية المستدامة 7 و 11 في باكستان.

Synthesis of cork-derived ceria ecoceramic, an emerging porous catalyst, for enhancing solar thermochemical water splitting.