• Energy Research
• 7. Clean energy close
• 11. Sustainability close
• 2. Zero hunger close
• 1. No poverty close
• EU close

The energy considered as waste heat in industrial furnaces owing to inefficiencies represents a substantial opportunity for recovery by means of thermal energy storage (TES) implementation. Although conventional systems based on sensible heat are used extensively, these systems involve technical limitations. Latent heat storage based on phase change materials (PCMs) results in a promising alternative for storing and recovering waste heat. Within this scope, the proposed PCM-TES allows for demonstrating its implementation feasibility in energy-intensive industries at high temperature range. The stored energy is meant to preheat the air temperature entering the furnace by using a PCM whose melting point is 885 °C. In this sense, a heat transfer model simulation is established to determine an appropriate design based on mass and energy conservation equations. The thermal performance is analysed for the melting and solidification processes, the phase transition and its influence on heat transference. Moreover, the temperature profile is illustrated for the PCM and combustion air stream. The obtained results prove the achievability of very high temperature levels (from 700 to 865 °C) in the combustion air preheating in a ceramic furnace; so corroborating an energy and environmental efficiency enhancement, compared to the initial condition presenting an air outlet at 650 °C.

Abstract This paper aims to present a feasibility study of the innovative plant for methanol synthesis from carbon dioxide-sequestered by fossil fuel power plant and hydrogen, which is produced by water electrolyzer employing the over-production on the electrical grid. The thermo-economic analysis is performed in the framework of the MefCO2 H2020 EU project and it is referred to the German economic scenario, properly taking into account the real market costs and cost functions for different components of the plant. Three different plant capacities for methanol production (4000 10,000 and 50,000 ton/year) have been investigated, assuming an average cost for electrical energy to feed electrolysers and analyzing the influence of the most significant parameters (oxygen selling option, methanol selling price and electrolysers’ capital cost) on the profitability of the plant. The analysis has been performed in W-ECoMP, software for the thermo-economic analysis and plant optimization developed by the University of Genoa.

Dans les latitudes tempérées élevées, les ongulés donnent généralement naissance dans une fenêtre temporelle étroite lorsque les conditions sont optimales pour la survie de la progéniture au printemps ou au début de l'été, et utilisent une photopériode changeante pour les conceptions temporelles afin d'anticiper ces conditions. Cependant, dans les basses latitudes tropicales, la variation de la durée du jour est minime et la variation des précipitations rend le cycle saisonnier moins prévisible. Néanmoins, plusieurs espèces d'ongulés conservent des pics de naissance étroits dans de telles conditions, tandis que d'autres montrent que les naissances se propagent assez largement tout au long de l'année. Nous avons étudié comment la variation des précipitations d'une année à l'autre et d'une année à l'autre a influencé le moment de la reproduction de quatre espèces d'ongulés montrant ces modèles contrastés dans la région de Masai Mara au Kenya. Les quatre espèces présentaient des pics de naissance au cours de la période optimale putative au début de la saison humide. Pour le hartebeest et l'impala, le pic de naissance est diffus et la progéniture naît tout au long de l'année. En revanche, le topi et le phacochère ont montré une concentration saisonnière étroite de naissances, avec des conceptions supprimées une fois que les précipitations mensuelles sont tombées en dessous d'un seuil. Les fortes précipitations de la saison précédente et les fortes pluies précoces de l'année en cours ont amélioré la survie au stade juvénile de toutes les espèces, à l'exception de l'impala. Nos résultats révèlent comment la variation des précipitations affectant la croissance des graminées et donc la nutrition des herbivores peut régir la phénologie reproductive des ongulés dans les latitudes tropicales où la variation de la longueur du jour est minime. Le mécanisme sous-jacent semble être la suppression des conceptions une fois que les gains nutritionnels deviennent insuffisants. En réagissant de manière proximale à la variation des précipitations au cours de l'année, les ongulés de la savane tropicale sont moins susceptibles d'être affectés négativement par les conséquences du réchauffement climatique sur la phénologie de la végétation que les ongulés du Nord montrant un contrôle photopériodique plus rigide sur le moment de la reproduction. En latitudes templadas altas, los ungulados generalmente dan a luz dentro de una ventana de tiempo estrecha cuando las condiciones son óptimas para la supervivencia de la descendencia en primavera o principios del verano, y utilizan conceptos cambiantes de fotoperíodo a tiempo para anticipar estas condiciones. Sin embargo, en latitudes tropicales bajas, la variación de la duración del día es mínima, y la variación de las precipitaciones hace que el ciclo estacional sea menos predecible. Sin embargo, varias especies de ungulados conservan picos de nacimiento estrechos en tales condiciones, mientras que otras muestran nacimientos muy extendidos a lo largo del año. Investigamos cómo la variación interanual de las precipitaciones influyó en el tiempo reproductivo de cuatro especies de ungulados que muestran estos patrones contrastantes en la región de Masai Mara en Kenia. Las cuatro especies exhibieron picos de nacimiento durante el periodo óptimo putativo en la estación húmeda temprana. Para hartebeest e impala, el pico de nacimiento era difuso y las crías nacían durante todo el año. Por el contrario, topi y jabalí mostraron una estrecha concentración estacional de nacimientos, con concepciones suprimidas una vez que las precipitaciones mensuales cayeron por debajo de un nivel umbral. Las altas precipitaciones en la temporada anterior y las altas lluvias tempranas en el año en curso mejoraron la supervivencia en la etapa juvenil para todas las especies, excepto los impalas. Nuestros hallazgos revelan cómo la variación de la precipitación que afecta el crecimiento de la hierba y, por lo tanto, la nutrición de los herbívoros, puede gobernar la fenología reproductiva de los ungulados en latitudes tropicales donde la variación de la duración del día es mínima. El mecanismo subyacente parece ser la supresión de las concepciones una vez que las ganancias nutricionales se vuelven insuficientes. Al responder proximalmente a la variación de las precipitaciones dentro del año, es menos probable que los ungulados de la sabana tropical se vean afectados negativamente por las consecuencias del calentamiento global para la fenología de la vegetación que los ungulados del norte que muestran un control fotoperiódico más rígido sobre el tiempo reproductivo. In high temperate latitudes, ungulates generally give birth within a narrow time window when conditions are optimal for offspring survival in spring or early summer, and use changing photoperiod to time conceptions so as to anticipate these conditions. However, in low tropical latitudes day length variation is minimal, and rainfall variation makes the seasonal cycle less predictable. Nevertheless, several ungulate species retain narrow birth peaks under such conditions, while others show births spread quite widely through the year. We investigated how within-year and between-year variation in rainfall influenced the reproductive timing of four ungulate species showing these contrasting patterns in the Masai Mara region of Kenya. All four species exhibited birth peaks during the putative optimal period in the early wet season. For hartebeest and impala, the birth peak was diffuse and offspring were born throughout the year. In contrast, topi and warthog showed a narrow seasonal concentration of births, with conceptions suppressed once monthly rainfall fell below a threshold level. High rainfall in the previous season and high early rains in the current year enhanced survival into the juvenile stage for all the species except impala. Our findings reveal how rainfall variation affecting grass growth and hence herbivore nutrition can govern the reproductive phenology of ungulates in tropical latitudes where day length variation is minimal. The underlying mechanism seems to be the suppression of conceptions once nutritional gains become insufficient. Through responding proximally to within-year variation in rainfall, tropical savanna ungulates are less likely to be affected adversely by the consequences of global warming for vegetation phenology than northern ungulates showing more rigid photoperiodic control over reproductive timing. في خطوط العرض المعتدلة العالية، تلد ذوات الحوافر عمومًا في غضون فترة زمنية ضيقة عندما تكون الظروف مثالية لبقاء النسل في الربيع أو أوائل الصيف، وتستخدم تغيير الفترة الضوئية إلى مفاهيم زمنية لتوقع هذه الظروف. ومع ذلك، في خطوط العرض الاستوائية المنخفضة، يكون تباين طول اليوم ضئيلًا، ويجعل تباين هطول الأمطار الدورة الموسمية أقل قابلية للتنبؤ. ومع ذلك، فإن العديد من الأنواع ذوات الحوافر تحتفظ بقمم ولادة ضيقة في ظل هذه الظروف، في حين أن البعض الآخر يظهر أن الولادات تنتشر على نطاق واسع خلال العام. لقد حققنا في كيفية تأثير التباين في هطول الأمطار خلال العام وبين الأعوام على التوقيت التكاثري لأربعة أنواع من ذوات الحوافر تظهر هذه الأنماط المتناقضة في منطقة ماساي مارا في كينيا. أظهرت جميع الأنواع الأربعة قمم ولادة خلال الفترة المثلى المفترضة في موسم الأمطار المبكر. بالنسبة لحيوان النحل والامبالا، كانت ذروة الولادة منتشرة وولدت ذرية على مدار العام. على النقيض من ذلك، أظهر التوبي والخنزير الحربي تركيزًا موسميًا ضيقًا للولادات، مع قمع المفاهيم بمجرد انخفاض هطول الأمطار الشهري إلى ما دون مستوى العتبة. عزز ارتفاع هطول الأمطار في الموسم السابق وارتفاع الأمطار المبكرة في العام الحالي البقاء على قيد الحياة في مرحلة الشباب لجميع الأنواع باستثناء الإمبالا. تكشف النتائج التي توصلنا إليها كيف أن تباين هطول الأمطار الذي يؤثر على نمو العشب وبالتالي تغذية الحيوانات العاشبة يمكن أن يحكم الفينولوجيا الإنجابية لذوات الحوافر في خطوط العرض الاستوائية حيث يكون تباين طول اليوم ضئيلًا. يبدو أن الآلية الأساسية هي قمع المفاهيم بمجرد أن تصبح المكاسب الغذائية غير كافية. من خلال الاستجابة القريبة من التباين في هطول الأمطار خلال العام، فإن ذوات الحوافر في السافانا الاستوائية أقل عرضة للتأثر سلبًا بعواقب الاحترار العالمي على فينولوجيا الغطاء النباتي من ذوات الحوافر الشمالية التي تظهر تحكمًا دوريًا ضوئيًا أكثر صرامة في توقيت التكاثر.

Biofuels have been identified as a mid-term GHG emission abatement solution for decarbonising the transport sector. This study examines the techno-economic analysis of biofuel production via biomass fast pyrolysis and subsequent bio-oil upgrading via zeolite cracking. The aim of this study is to compare the techno-economic feasibility of two conceptual catalyst regeneration configurations for the zeolite cracking process: (i) a two-stage regenerator operating sequentially in partial and complete combustion modes (P-2RG) and (ii) a single stage regenerator operating in complete combustion mode coupled with a catalyst cooler (P-1RGC). The designs were implemented in Aspen Plus® based on a hypothetical 72 t/day pine wood fast pyrolysis and zeolite cracking plant and compared in terms of energy efficiency and profitability. The energy efficiencies of P-2RG and P-1RGC were estimated at 54% and 52%, respectively with corresponding minimum fuel selling prices (MFSPs) of £7.48/GGE and £7.20/GGE. Sensitivity analysis revealed that the MFSPs of both designs are mainly sensitive to variations in fuel yield, operating cost and income tax. Furthermore, uncertainty analysis indicated that the likely range of the MFSPs of P-1RGC (£5.81/GGE  £11.63/GGE) at 95% probability was more economically favourable compared with P-2RG, along with a penalty of 2% reduction in energy efficiency. The results provide evidence to support the economic viability of biofuel production via zeolite cracking of pyrolysis-derived bio-oil.

The SBE19 Brussels - BAMB-CIRCPATH "Building as Material Banks - A Pathway for a Circular held in Brussels on 5 to 7 of February 2019, is an initiative of the Consortium of the H2020 BAMB Project together with the Sustainable Built Environment (SBE) series of conferences. Being within the SBE series, this event gathers the support of CIB International Council for Research and Innovation in Building and Construction, iiSBE International Initiative for a Sustainable Built Environment, the United Nations Environment Programme, and FIDIC International Federation of Consulting Engineers. The goal of this series of regional and international conferences is to disseminate innovative policies and developments in the field of sustainable urban environment to a broad international audience of specialists in policy, design, construction and operation of buildings and related infrastructure. info:eu-repo/semantics/publishedVersion

Spinel LiNi0.5Mn1.5O4 as one of the high-energy positive electrode materials for next generation Li-ion batteries has attracted significant interest due to its economic and environmental advantages. However, the sensitivity of this type of material upon short to long term ambient storage conditions and the impact on the electrochemical performances remains poorly explored. Nevertheless, this remains an important aspect for practical large-scale synthesis, storage and utilization. Herein, we study and compare the evolution of surface chemistry, bulk crystal structure and elemental content evolution and distribution of LiNi0.5Mn1.5O4 using a variety of characterization techniques including XPS and STEM-EDS-EELS, as well as electrochemical analysis. We show that Mn species dominate the outer surface (0–5 nm), while Ni and Li are preferentially located further away and in the bulk. The studied LiNi0.5Mn1.5O4 material is found to be stable, with minor changes in surface or bulk characteristics detected, even after 12 months of storage under ambient air conditions. The low surface reactivity to air also accounts for the minor changes to the electrochemical performance of the air-exposed LiNi0.5Mn1.5O4, compared to the pristine material. This study provides guidance for the appropriate storage, handling and processing of this high-performance cathode material.

Optimization of all numerical codes ported in the infrastructure and used for supercapacitors, PV and batteries. The scope of deliverable D3.2 is to report the new advances in the field of materials for energy that comes from the search of new methodologies and models that could be more efficient on the new generation of computer hardware for exascale. In this respect, deliverable D3.2 is a transversal deliverable that report the new advances related to activities described in task T3.2, T3.3 and T3.4. H2020