• Energy Research
• Restricted close
• CH close
• FR close
• AU close
• RU close
• FI close

Dielectric elastomers are highly promising as functional materials for the rapidly developing field of flexible actuator and generator technology. They offer a unique combination of low densities and large reversible deformations of up to more than 100% in area, and consequently have great potential for many new types of application. However, implementation has been impeded by the lack of specialized materials. The elastomers that have so far been investigated suffer from a number of disadvantages, including the need for very high activation voltages and limited service lifetimes. This thesis describes an investigation of the use of elastomeric composites as dielectric elastomers with the aim of optimizing and improving their performance in actuators. The influence of materials properties on actuation was first analyzed on the basis of a simple physical model and materials properties derived from standard test methods. The implications for the actuation performance of three conventional dielectric elastomers were then considered in detail. A preliminary conclusion was that the actuation performance could be improved if the permittivity of the elastomers were to be increased by modification with ceramic or conductive fillers. However, actuation performance was shown to depend not only on the permittivity, but also on the elastic modulus, the electrical breakdown strength, and strain hardening. Thus, although significant increases in permittivity were achieved by this approach, actuation performance was compromised by an increase in modulus in the case of the ceramic fillers, and a dramatic drop in electrical breakdown strength, in the case of the conducting fillers. A more promising approach was therefore suggested to be the use of an organic conducting filler encapsulated in an insulating matrix. It was demonstrated that it is indeed possible to increase the permittivity of a given elastomer while maintaining a high electrical breakdown strength. Different processing routes were investigated in order to control the dispersion of the filler and tailor performance. The optimum filler concentration, i.e. that providing the best compromise between permittivity and stiffness, was determined to be approximately 16 vol%, resulting in an improvement by a factor of 2 in actuation strain for a given applied voltage over that obtained with the unmodified matrix. Higher filler concentrations were also argued to have considerable potential for use in generators, given that the observed increased permittivity was also associated with high electrical breakdown strengths and increased strains at break. A threefold increase in converted energy per working cycle was predicted for a composite containing 25.5 vol% fillers based on a simplified model for a dielectric elastomer generator. Whilst these results are extremely encouraging, it is concluded that the composite approach has, in general, only limited potential as a means of obtaining further increases in actuation performance. The major difficulty remains that the use of a relatively rigid second phase to increase dielectric performance will inevitably also increase the elastic modulus beyond a certain filler concentration. As argued in the final part of the thesis, the way forward may therefore ultimately depend on the development of new types of synthetic elastomeric matrix materials that combine intrinsic improvements in electrical response with reduced moduli.

Le Meillour & Sinet-Mathiot et al. 2024 Increasing sustainability in palaeoproteomics by optimizing digestion times for large-scale archaeological bone analyses DOI: 10.1016/j.isci.2024.109432 MALDI-ToF MS data (raw data: mzML files, merged spectra: msd files) used for the ZooMS analysis of the bone material from Baishiya Karst Cave (China) and La Draga (Spain), along with the R codes for merging triplicates into one msd file. 

Climaps.eu is an online atlas providing data, visualizations and commentaries about climate adaptation debate. It contains 33 issue-maps and 5 issue-stories. Each of the maps focuses on one issue in the adaptation debate and provides.The atlas is addressed to climate experts (negotiators, NGOs and companies concerned by global warming, journalists…) and to citizens willing to engage with the issues of climate adaptation.It employs advanced digital methods to deploy the complexity of the issues related to climate adaptation and information design to make this complexity legible.

The present paper exhibits a real time assessment of a robust Energy Management Strategy (EMS) for battery-super capacitor (SC) Hybrid Energy Storage System (HESS). The proposed algorithm, dedicated to an electric vehicular application, is based on a self-gain scheduled controller, which guarantees the H∞ performance for a class of linear parameter varying (LPV) systems. Assuming that the duty cycle of the involved DC-DC converters are considered as the variable parameters, that can be captured in real time, and forwarded to the controller to ensure both; the performance and robustness of the closed-loop system. The subsequent controller is therefore time-varying and it is automatically scheduled according to each parameter variation. This algorithm has been validated through experimental results provided by a tailor-made test bench including both the HESS and the vehicle traction emulation system. The experimental results demonstrate the overall stability of the system, where the proposed LPV supervisor successfully accomplishes a power frequency splitting in an adequate way, respecting the dynamic of the sources. The proposed solution provides significant performances for different speed levels.

The search for affordable high performance electrode materials in photoelectrochemical hydrogen production by solar water splitting is an ongoing quest. Hematite is a photoanode material with an electronic band gap suitable for efficient absorption of visible light in a photoelectrochemical cell (PEC). Although its poor electronic structure makes hematite a controversial candidate for PEC, it remains promising because it is an earth abundant, chemically stable and low cost material – necessary prerequisites for PEC to become a competitive cost-efficient solar fuel economy. In addition to reviewing some recent PEC research on hematite and its relevant physical and chemical characteristics, we show how hematite obtained by a low cost synthesis can be refined by hydrothermal treatment and further functionalized by coating with phycocyanin, a light harvesting protein known for photosynthesis in blue-green algae.

In the anodisation of Nb in acidic fluoride solutions or warm aqueous alkali, and in that of Mo in concentrated phosphoric acid, impedance spectroscopy provides evidence that 3D film growth proceeds already during the active–passive transition. Indeed, linear potential dependences of both the inverse of the high-frequency capacitance and of the product of the high-frequency resistance times the steady-state current are observed already below the peak potential. Simultaneously, a pseudo-inductive loop at intermediate frequencies is detected in the impedance spectra. In the present paper, we propose a kinetic model for the interpretation of these data. The model assumes that the metal is covered with a non-stoichiometric oxide containing at least two oxidation states of the cation. The processes of oxidative dissolution of the lower valence cations and their transformation to cations of higher valence, leading to passivation, explain the shape of the I–E curve. These processes are limited by both charge transfer at the film–solution (F/S) interface and transport of cation vacancies through the film. Thickening of the oxide film is assumed to proceed simultaneously, and is limited by transport of oxygen vacancies accelerated by an interfacial charge of cation vacancies.

The International Building Physics Toolbox (IBPT) is a software library developed originally for heat, air and moisture system analysis in building physics. The toolbox is constructed as a modular structure of standard building elements, using the graphical programming language Simulink. To enable development of the toolbox, a common modelling platform is defined: a set of unique communication signals, material database and documentation protocol. The IBPT is an open source and available on the Internet. Any user can utilize, expand and develop the contents of the toolbox. This paper presents structure and essence of the library. Potential applications of the toolbox are illustrated through examples. (C) 2006 Elsevier B.V. All rights reserved.

Distributed power generation and cogeneration of heat and power is an attractive way toward a more rational conversion of fossil and bio fuels. Solid oxide fuel cell (SOFC) – gas turbine (GT) hybrid systems are emerging as the most promising candidates enabling the achievement of a cleaner and more efficient conversion of a large variety of resources across a broad power range covering from small to medium scale applications. This thesis introduces an innovative concept of SOFC-GT hybrid system that allows reaching efficiencies higher than the state of the art while enabling the carbon dioxide separation and avoiding fuel cell pressurisation technical issues. Several hybrid system design alternatives based on this concept are analysed through a thermodynamic optimisation approach combining process modelling, advanced process integration techniques and multi-objective optimisation. A number of optimal hybrid system configurations are determined for different design targets. The results consistently demonstrate the higher energy conversion performance and flexibility enabled with respect to the state of the art. The innovative concept analysis is extended to two applications for which SOFC-GT hybrid cycles are expected to provide the most significant impact toward sustainability: the small scale distributed generation and the conversion of renewable resources. A simplified version of the new hybrid system layout is especially developed for small scale distributed generation, typical of residential building applications (5-10 kWel). Experimental data are used to prove the technical feasibility of the system and to assess the performance potentially achievable with currently feasible technologies. The results of the analysis underline that energy conversion efficiencies higher than traditional centralised power generation can be achieved even at such a small scale. A systematic process integration and optimisation approach is used to assess the energy conversion performance of the original SOFC-GT hybrid cycle fuelled with hydrothermally gasified wet waste biomass. The analysis highlights the considerable potential of the integrated system that allows for converting wet waste biomass into electricity with First Law efficiency higher than 60% while simultaneously enabling the separation of the biogenic carbon dioxide.