• Energy Research
• engineering and technology close
• FR close

Cu(In,Ga)Se-2-based solar cells buffered with indium sulfide grown by numerous techniques have reached efficiencies comparable to those achieved by standard devices buffered with (CBD)CdS. The present paper firstly recalls some of the properties of the indium sulfide single crystal and Points Out the disagreements concerning the thin films properties inventoried in the literature. Secondly, the influence of the presence of some "foreign elements" within file indium sulfide on its properties is presented. It is shown that these "foreign elements", even at low concentration levels, are possibly at the origin or the thin films properties deviations compared to the single crystal. The impact of these contaminants on the solar cells performance is finally discussed.

The movement of the powdery material occurs in a multi-phase non-uniform electrostatic field at determined values of the voltage and the frequency, using travelling wave technique. This technique was applied for very small particles such as bacteria and other similar particle size. The objective of this work is to analyze the movement of PVC micronized particles and the feasibility of the separation of PVC/copper granular mixture of average size 100 μm. Two-phase and three-phase conveyors, which are supplied by high voltage amplifiers controlled by digital function generators, have been the subject of a parametric experimental investigation. Several factors were analyzed such as the voltage level up to 1400 V, the frequency, the phase shift and the number of phases of the conveyor. The obtained results showed that depending on the values of the above factors: i) the micronized particles can move instantly right after switching the conveyor, ii) the particles move towards one direction or the other of the conveyor iii) the separation of a granular mixture of plastic and copper micronized particles is possible.

Finding a numerical method to model solute transport in porous media with high heterogeneity is crucial, especially when chemical reactions are involved. The phase space formulation termed the multi-advective water mixing approach (MAWMA) was proposed to address this issue. The water parcel method (WP) may be obtained by discretizing MAWMA in space, time, and velocity. WP needs two transition matrices of velocity to reproduce advection (Markovian in space) and mixing (Markovian in time), separately. The matrices express the transition probability of water instead of individual solute concentration. This entails a change in concept, since the entire transport phenomenon is defined by the water phase. Concentration is reduced to a chemical attribute. The water transition matrix is obtained and is demonstrated to be constant in time. Moreover, the WP method is compared with the classic random walk method (RW) in a high heterogeneous domain. Results show that the WP adequately reproduces advection and dispersion, but overestimates mixing because mixing is a sub-velocity phase process. The WP method must, therefore, be extended to take into account incomplete mixing within velocity classes.

Abstract This paper describes the point of view of a gas utility regarding systems for cooling and heating by solid sorption. Indeed, the context is favorable to the emergence of such systems first, of course, due to the regulatory constraints on certain refrigerant fluids, but also for their specific technical characteristics (the storage capacity, for example). The gas utilities have in fact shown an increasingly keen interest in all types of sorption systems, as a way of diversifying natural gas utilization, particularly in the summer. After a review of that context, this paper highlights the advantages of solid sorption and describes the criteria for choosing an installation in air conditioning and cooling production applications. Finally, it discusses the difficulties likely to be encountered in developing sorption systems, as well as the prospects for the future.

Abstract Energy system modelling can be used to assess the implications of different scenarios and support improved policymaking. However, access to data is often a barrier to starting energy system modelling in developing countries, thereby causing delays. This article therefore provides data that can be used to create a simple zero order energy system model for Mauritania, which can act as a starting point for further model development and scenario analysis. The data are collected entirely from publicly available and accessible sources, including the websites and databases of international organizations, journal articles, and existing modelling studies. This means that the dataset can be easily updated based on the latest available information or more detailed and accurate local data. These data were also used to calibrate a simple energy system model using the Open Source Energy Modelling System (OSeMOSYS) and two stylized scenarios (Fossil Future and Least Cost ) for 2020-2050. The assumptions used and results of these scenarios are presented in the appendix as an illustrative example of what can be done with these data. This simple model can be adapted and further developed by in-country analysts and academics, providing a platform for future work.

AbstractEnhancing the efficiency of the electric vehicle’s powertrain becomes a crucial focus, wherein the control system for the traction motor plays a significant role. This paper presents a novel electric vehicle traction motor control system based on a robust predictive direct torque control approach, an improved version of the conventional DTC, where the traditional switching table and the hysteresis regulators are substituted with a predictive block based on an optimization algorithm. Additionally, a robust predictive speed loop regulator is employed instead of the proportional-integral regulator, which integrates a new cost function with a finite horizon, incorporating integral action into the control law based on a Taylor series expansion. This technique’s primary benefit is its independence from the necessity to measure and observe external disturbances, as well as uncertainties related to parameters. The effectiveness of the suggested system was confirmed through simulation and experimental results under the OPAL-RT platform. The findings indicate that the proposed approach outperforms the conventional method in terms of rejecting disturbances, exhibiting robustness to variations in parameters, and minimizing torque ripple.

n the French context of increasing renewable penetration and significant nuclear power, the optimal contribution of this energy source is discussed from two viewpoints. On the one hand, from the social planner viewpoint, the nuclear optimum contribution is the one that minimizes the overall electric price, whatever the resulting load factor. The use of screening curves, often implemented to design the optimal power mix is questioned, being highly sensitive to the assumptions. On the other hand, from the plant operator viewpoint, the nuclear power plants need to amortize the capital expenses, hence achieve the longest operating time. With a view to make the two viewpoints meet, we propose to operate nuclear power plants as baseloads and consider modulation through the power use, i.e. supply electricity to the electric system when requested and use the remaining power to produce other valuable products, such as heat or hydrogen.