• Energy Research
• 6. Clean water close
• GB close
• UA close
• BE close
• Energies close

Freshwater scarcity is a significant concern due to climate change in some regions of Brazil; likewise, evaporation rates have increased over the years. Floating photovoltaic systems can reduce water evaporation from reservoirs by suppressing the evaporating area on the water surface. This work evaluated the effects of floating photovoltaic systems on water evaporation rates in the Passaúna Reservoir, southeastern Brazil. Meteorological data such as temperature, humidity, wind speed, and solar radiation were used to estimate the rate of water evaporation using FAO Penman–Monteith, Linacre, Hargreaves–Samani, Rohwer, and Valiantzas methods. The methods were tested with the Kruskal–Wallis test, including measured evaporation from the nearest meteorological station to determine whether there were significant differences between the medians of the methods considering a 95% confidence level for hypothesis testing. All methods differed from the standard method recommended by the FAO Penman–Monteith. Simulations with more extensive coverage areas of the floating photovoltaic system were carried out to verify the relationship between the surface water coverage area and the evaporation reduction efficiency provided by the system and to obtain the avoided water evaporation volume. For the floating photovoltaic system with a coverage area of 1265.14 m2, an efficiency of 60.20% was obtained in reducing water evaporation; future expansions of the FPS were simulated with coverage areas corresponding to energy production capacities of 1 MWp, 2.5 MWp, and 5 MWp. The results indicated that for a floating photovoltaic system coverage area corresponding to 5 MWp of energy production capacity, the saved water volume would be enough to supply over 196 people for a year. More significant areas, such as covering up the entire available surface area of the Passaúna reservoir with a floating photovoltaic system, could save up to 2.69 hm3 of water volume annually, representing a more significant value for the public management of water resources.

This paper presents an exergy analysis of an actual two-pass (RO) desalination system with the seawater solution treated as a real mixture and not an ideal mixture. The actual 127 ton/h two pass RO desalination plant was modeled using IPSEpro software and validated against operating data. The results show that using the (ERT) and (PX) reduced the total power consumption of the SWRO desalination by about 30% and 50% respectively, whereas, the specific power consumption for the SWRO per m3 water decreased from 7.2 kW/m3 to 5.0 kW/m3 with (ERT) and 3.6 kW/m3 with (PX). In addition, the exergy efficiency of the RO desalination improved by 49% with ERT and 77% with PX and exergy destruction was reduced by 40% for (ERT) and 53% for (PX). The results also showed that, when the (ERT) and (PX) were not in use, accounted for 42% of the total exergy destruction. Whereas, when (ERT) and (PX) are in use, the rejected seawater account maximum is 0.64%. Moreover, the (PX) involved the smallest area and highest minimum separation work.

In this paper, the immiscible water-alternating-CO2 flooding process at the LH11-1 oilfield, offshore Guangdong Province, was firstly evaluated using full-field reservoir simulation models. Based on a 3D geological model and oil production history, 16 scenarios of water-alternating-CO2 injection operations with different water alternating gas (WAG) ratios and slug sizes, as well as continuous CO2 injection (Con-CO2) and primary depletion production (No-CO2) scenarios, have been simulated spanning 20 years. The results represent a significant improvement in oil recovery by CO2 WAG over both Con-CO2 and No-CO2 scenarios. The WAG ratio and slug size of water affect the efficiency of oil recovery and CO2 injection. The optimum operations are those with WAG ratios lower than 1:2, which have the higher ultimate oil recovery factor of 24%. Although WAG reduced the CO2 injection volume, the CO2 storage efficiency is still high, more than 84% of the injected CO2 was sequestered in the reservoir. Results indicate that the immiscible water-alternating-CO2 processes can be optimized to improve significantly the performance of pressure maintenance and oil recovery in offshore reef heavy-oil reservoirs significantly. The simulation results suggest that the LH11-1 field is a good candidate site for immiscible CO2 enhanced oil recovery and storage for the Guangdong carbon capture, utilization and storage (GDCCUS) project.

Greenhouses with efficient controlled environment offer a promising solution for food security against the impacts of increasing global temperatures and growing water scarcity. However, current technologies used to achieve this controlled environment consume a significant amount of energy, which impacts on operational costs and CO2 emissions. Using advanced metal organic framework materials (MOFs) with superior water adsorption characteristics, this work investigates the development of a new technology for a greenhouse-controlled environment. The system consists of MOF coated heat exchanger, air to air heat exchanger, and evaporative cooler. A three-dimensional computational fluid dynamics (CFD) model was developed using COMSOL software and experimentally validated for the MOF-801/Graphene coated heat exchanger (DCHE) to determine the best cycle time and power input. It was found that using desorption time of 16 min and power input of 1.26 W, the maximum water removal rate was obtained from MOF-801/Graphene of 274.4 g/kgMOF/W.hr. In addition, an overall mathematical model for the greenhouse climate control was developed and used to investigate the effects of air humidity and velocity on the input air conditions to the greenhouse. Results showed that with high relative humidity levels of 90% in the greenhouse can be conditioned to reach the required relative humidity of 50%.

With the increasing needs of clean water supplies, the use of biomass wastes and residues for environmental remediation is essential for environmental sustainability. In this study, the residues from winery and citrus juice industries, namely grape skin and orange peel, respectively, were first converted to hydrochars by hydrothermal carbonization (HTC) and then a cationic dye (methylene blue) adsorption was studied on hydrochars. Hydrochars from both feedstocks were produced at three different temperatures (180, 220, and 250 °C) and a fixed residence time (1 h) to evaluate the hydrochar’s performance on the dye adsorption. The hydrochars were characterized in terms of their pH, pH at point of zero charge (pHPZC), surface functionalities, and surface area. A batch adsorption study of the dye was carried out with variable adsorbate concentration, pH, and temperature. Two adsorption isotherms namely Langmuir and Freundlich models were fitted at 4, 20, and 36 °C. The thermodynamic properties of adsorption (Gibbs free energy (ΔG), enthalpy (ΔH) and entropy (ΔS)) were evaluated from the isotherms fittings. Results showed that the dye adsorption on both hydrochars was significant and followed Langmuir isotherm. The maximum adsorption capacity on citrus waste hydrochar was higher than the winery waste hydrochar at any corresponding HTC temperature. Although hydrochars showed the lowest surface area (46.16 ± 0.11 and 34.08 ± 1.23 m2/g for citrus and winery wastes, respectively) at 180 °C, their adsorption was the highest, owing to their maximum density of total oxygen functional groups (23.24 ± 0.22 and 32.69 ± 1.39 µmol/m2 for citrus and winery wastes, respectively), which decreased with the increase in HTC temperature. This research shows a sustainable route for the production of highly effective adsorbent materials at lower HTC temperatures from citrus and winery wastes.

Water, as one of the main media of human existence on earth, is the basis of the functioning of most societies. This article discusses various activities related to water resource management and analyzes the evaluation of selected quality parameters of tap water in Poland and Ukraine. The aim of the manuscript was to compare opinions on tap water quality and habits of its use in Poland and Ukraine, taking into account different seasons of the year as periods of use of supplied water. The hypothesis of the study was that tap water parameters are evaluated differently in Poland and Ukraine at different times of water supply. Due to the complexity of research aspects, a mixed-methods research procedure was used, in which a literature review was combined with a survey and statistical analysis. For the purpose of the survey, the authors’ questionnaire “Survey of customers’ opinions on selected parameters of tap water supplied in Poland and Ukraine” was created. The results of the research confirmed the hypothesis and allowed for the development a model for the evaluation of parameters of tap water supplied on the territory of Poland and Ukraine and to get to know the expectations of customers of these countries. The presented model provides practical indications that can be used to optimize water supply and meet customers’ expectations, including improvement of water quality parameters.

Microalgae are promising feedstock for the production of biodiesel and diverse medium- and high-value products such as pigments and polyunsaturated fatty acids. The importance of strain selection adapted to specific environments is important for economical purposes. We characterize here two microalgal strains, isolated from wastewater of shrimp cultivation ponds in Vietnam. Based on the 18S rDNA-ITS region, one strain belongs to the Eustigmatophyceae class and is identical to the Nannochloropsis salina isolate D12 (JX185299.1), while the other is a Chlorophyceae belonging to the Desmodesmus genus, which possesses a S516 group I intron in its 18S rDNA gene. The N. salina strain is a marine and oleaginous microalga (40% of dry weight (DW) at stationary phase) whole oil is rich in saturated fatty acids (around 45% of C16:0) suitable for biodiesel and contains a few percent of eicosapentaenoic acid (C20:5). The Desmodesmus isolate can assimilate acetate and ammonium and is rich in lutein. Its oil contains around 40%–50% α-linolenic acid (C18:3), an essential fatty acid. Since they tolerate various salinities (10% to 35‰), both strains are thus interesting for biodiesel or aquaculture valorization in coastal and tropical climate where water, nutrient, and salinity availability vary greatly depending on the season.

This work proposed a base method for automated assessment of Small Hydro-Power (SHP) potential for a run-of-river (RoR) scheme using geographic information systems (GIS). The hydro-power potential (HP) was represented through a comprehensive methodology consisting of a structured raster database. A calibrated and validated hydrological model (Soil and Water Assessment Tool—SWAT) was used to estimate monthly streamflow as the Mesh Sweeping Approach (MSA) driver. The methodology was applied for the upper part of the Huazuntlan River Watershed in Los Tuxtlas Mountains, Mexico. The MSA divided the study area into a rectangular mesh. Then, at every location within the mesh, SHP was obtained. The main components of the MSA as a RoR scheme were the intake, the powerhouse, and the surge tank. The surge tank was located at cells where the hydro-power was calculated and used as a reference to later locate the intake and powerhouse by maximizing the discharge and head. SHP calculation was performed by sweeping under different values of the penstock’s length, and the headrace’s length. The maximum permissible lengths for these two variables represented potential hydro-power generation locations. Results showed that the headrace’s length represented the major contribution for hydro-power potential estimation. Additionally, values of 2000 m and 1500 m for the penstock and the headrace were considered potential thresholds as there is no significant increment in hydro-power after increasing any of these values. The availability of hydro-power on a raster representation has advantages for further hydro-power data analysis and processing.