• Energy Research
• 12. Responsible consumption close
• 8. Economic growth close
• GB close
• BE close

This research investigates the relationships among renewable energy consumption, economic growth, and financial development in five sub-Saharan African nations utilizing panel data from 2000 to 2020. Econometric methods are used to ascertain the existence or absence of cross-sectional dependence and the short-run and long-run connections between the following factors: Pesaran cross-sectional dependence (CD) and cross-sectionally augmented IPS (CIPS) unit root tests, pooled mean group (PMG), and dynamic ordinary least squares (DOLS) estimations. The presence of cross-sectional dependence is found and represented with the CIPS unit root test. No significant short-run relationship is found between the variables of the study, yet a significant long-run relationship is present among them. A positive relationship exists between CO2 emissions and financial development, while financial development and renewable energy consumption are found to have negative relationships with CO2 emissions. The study also supports the scale effect of the environmental Kuznets curve hypothesis. Additionally, no causality is found among the variables, and impulse response and variance decomposition estimation are carried out to recommend future effects. Policy implications of findings are discussed, with accompanying suggestions.

A precise energy conservation and emission reduction (ECER) path in industrial sector contains two aspects: applying effective ECER measures and focusing on processes with significant ECER potential. However, most studies have investigated the ECER effects of an individual measure or only evaluated industrial-level ECER potential. Therefore, the objective of this study is to find a precise ECER path in China's iron and steel industry through quantitative analysis methods. First, this article adopts scenario analysis to simulate situations where different ECER measures are adopted and designs calculation methods to quantitatively evaluate the ECER effects in each scenario in 2020 and 2025. Second, through analysis of the application of ECER measures to certain processes, we calculate the ECER potential of different individual processes in the iron and steel industry. In addition, the conservation supply curve method and the quadrant method are used to measure the level of advanced technology application. The results show that: (1) for four types of ECER measures, the limitation of production output measure is most effective, contributing to 6.98% and 12.50% decreases in total industrial energy consumption and pollutant emissions in 2020 and 2025; moreover, the contribution of the adjustment of scale structure measure is comparatively low. (2) The sintering and ironmaking processes have strong ECER potential in 2020, while the steel making process also has high ECER potential in 2025. (3) 21 technologies are divided into 4 quadrants based on energy, popularity, and economic performance. In addition, we provide some suggestions for future ECER policies. In sum, this article provides an in-depth example of determining a precise ECER path in an important industry.

This Article examines the genesis and context of SE4All, placing the effort within both itshistorical and international policy contexts. It highlights the voluntary nature of the initiative andargues that its effective implementation and the achievement of its goals require the articulation ofan applicable international legal framework that aids the transformation of SE4All’s policy actionsinto binding international legal commitments. The article contends that such a transformation doesnot depend on the creation of entirely new legal rules or institutions. Instead, an effective frame-work for successful implementation of SE4All can be derived from existing rules of internationalhuman rights law and sustainable development law. Reliance on these twin bodies of interna-tional law will increase the prospects for SE4All to achieve energy access and related goals thatits predecessor initiatives have failed to accomplish

Abstract Many countries committed themselves in the Kyoto protocol to reduce greenhouse gas (GHG) emissions. Some of these targeted emission reductions could result from a switch from coal-fired to gas-fired electricity generation. The focus in this work lies on Western Europe, with the presence of the European Union Emission Trading Scheme (EU ETS). For the switching to occur, several conditions have to be fulfilled. First, an economical incentive must be present, i.e. a sufficiently high European Union Allowance (EUA) price together with a sufficiently low natural gas price. Second, the physical potential for switching must exist, i.e. at a given load, there must remain enough power plants not running to make switching possible. This paper investigates what possibilities exist for switching coal-fired plants for gas-fired plants, dependent on the load level (the latter condition above). A fixed allowance cost and a variable natural gas price are assumed. The method to address GHG emission reduction potentials is first illustrated in a methodological case. Next, the GHG emission reduction potentials are addressed for several Western European countries together with a relative positioning of their electricity generation. GHG emission reduction potentials are also compared with simulation results. GHG emission reduction potentials tend to be significant. The Netherlands have a very widespread switching zone, so GHG emission reduction is practically independent of electricity generation. Other counties, like Germany, Spain and Italy could reduce GHG emissions significantly by switching. With an allowance cost following the switch level of a 50% efficient gas-fired plant and a 40% efficient coal-fired plant in the summer season (like in 2005), the global GHG emission reduction (in the electricity generating sector) for the eight modeled zones could amount to 19%.

Sewage sludge handling is becoming a concern in Europe due to its increasing amount and the presence of contaminants, such as heavy metals and pharmaceutical and personal care products (PPCPs). Currently, over 70% of sludge in Europe is treated thermally by incineration or used as fertilizer in agriculture. New thermochemical methods are under development and are expected to be implemented in the near future. This paper considers the life cycle environmental impacts of the following five alternatives for sludge handling, taking into account the presence of heavy metals and PPCPs: i) agricultural application of anaerobically digested sludge; ii) agricultural application of composted sludge; iii) incineration; iv) pyrolysis; and v) wet air oxidation. The results suggest that anaerobic digestion with recovery of nutrients and electricity has the lowest environmental impacts in 11 out of 18 categories considered. For the mean to maximum resource recovery, composting is the worst alternative, followed by pyrolysis with lower recovery rates. Agricultural application of anaerobically digested sludge has the highest freshwater ecotoxicity due to heavy metals, unless their concentration is in the lowest range, as found in some European sewage sludge applied on land. Therefore, stricter control of heavy metals in the sludge is needed for this option to limit freshwater ecotoxicity to the levels comparable with the thermal processes. The results also indicate that PPCPs have a negligible contribution to freshwater ecotoxicity when compared to heavy metals in the anaerobically digested sludge. Since thermal processes are currently drawing attention due to their potential benefits, the findings of this work suggest that their adoption is environmentally beneficial only if high resource recovery rates can be achieved.

Tremendous growth in the number of automobiles in developed and developing global economies has exorbitantly boosted competition for petroleum products. Petroleum products derived from fossil fuels are predominantly responsible for environmental pollution as unburnt hydrocarbon (HC), carbon monoxide (CO), oxides of nitrogen (NOx) & carbon dioxide (CO2) emissions are released from the fossil fuel combustion. In the view of increasing environmental pollution and stringent emission norms, the present study is concentrated on using Jatropha biodiesel as an alternate fuel source to run variable compression ratio (VCR) diesel engine. The characteristics of VCR diesel engine emission have been evaluated under different compression ratio (CR), operating conditions of load & pressure of fuel injection. In this research work, Jatropha biodiesel diesel blend B30 (30% biodiesel and 70% diesel) and B0 (100% diesel) have been taken as fuel to run the engine. For conducting experiments, load has been varied from 0 to 12 Kg, CR from 14 to 18 and FIP from 180 to 270 bar as per the model of Response Surface Methodology experiments. The experimental investigation showed that the use of the B30 blend reduces HC & CO emissions by about 16.7% and 24% correspondingly in comparison to diesel. However noteworthy rise in NOx & CO2 emissions rate recorded by using the B30 blend as that of diesel. It has been shown that with enhancing in load & CR, HC&CO emissions decreased significantly however increase in CO2 and NOx observed. Advancing FIP, significantly decreases HC & CO emissions as well as tends to increase NOx and CO2 emissions.

Accurate modelling of agricultural management impacts on greenhouse gas emissions and the cycling of carbon and nitrogen is complicated due to interactions between various processes and the disturbance caused by field management. In this study, a process-based model, the Soil-Plant-Atmosphere Continuum System (SPACSYS), was used to simulate the effects of different fertilisation regimes on crop yields, the dynamics of soil organic carbon (SOC) and total nitrogen (SN) stocks from 1990 to 2010, and soil CO2 (2007-2010) and N2O (2007-2008) emissions based on a long-term fertilisation experiment with a winter-wheat (Triticum Aestivum L.) and summer-maize (Zea mays L.) intercropping system in Eutric Cambisol (FAO) soil in southern China. Three fertilisation treatments were 1) unfertilised (Control), 2) chemical nitrogen, phosphorus and potassium (NPK), and 3) NPK plus pig manure (NPKM). Statistical analyses indicated that the SPACSYS model can reasonably simulate the yields of wheat and maize, the evolution of SOC and SN stocks and soil CO2 and N2O emissions. The simulations showed that the NPKM treatment had the highest values of crop yields, SOC and SN stocks, and soil CO2 and N2O emissions were the lowest from the Control treatment. Furthermore, the simulated results showed that manure amendment along with chemical fertiliser applications led to both C (1017 ± 470 kg C ha(-1) yr(-1)) and N gains (91.7 ± 15.1 kg N ha(-1) yr(-1)) in the plant-soil system, while the Control treatment caused a slight loss in C and N. In conclusion, the SPACSYS model can accurately simulate the processes of C and N as affected by various fertilisation treatments in the red soil. Furthermore, application of chemical fertilisers plus manure could be a suitable management for ensuring crop yield and sustaining soil fertility in the red soil region, but the ratio of chemical fertilisers to manure should be optimized to reduce C and N losses to the environment.

This paper explores to what extent moving towards the 30% GHG emission reductions by 2020 with respect to 1990 in the EU can be considered a transformative target. To do so, we first define the concept of transformative targets from a complex systems perspective and show a novel approach and original results using an extended application of the GEM-E3 model. Traditional macroeconomic models cannot easily handle key synergetic system effects derived from green growth and sustainability policies, and thus require additional features. We analyse the role of semi-endogenous growth driven by learning-by-doing and low-carbon investment expectations following a long-term transformative trajectory.