• Energy Research
• GB close
• ES close
• CA close

This paper evaluates the performance of a recently patented rotationally asymmetrical dielectric totally internally reflective concentrator (RADTIRC) under diffuse radiation. The RADTIRC has a geometrical concentration gain of 4.969 and two half acceptance angles of ± 30° and ± 40° along the x-axis and z-axis respectively. Simulation and experimental work have been carried out to determine the optical concentration gain under diffuse radiation. It was found that the RADTIRC has an optical concentration gain of 1.94 under diffuse irradiance. The experimental results for the single concentrator showed an optoelectronic gain of 2.13, giving a difference of 9.8% due to factors such as the presence of direct radiation during experiments, the increase in diffuse radiation due to the reflection from surrounded buildings as well as from the ground reflection.

Abstract Bitumen is too viscous to be produced by conventional recovery methods and significant amounts are too deep to be recovered by mining, necessitating enhanced in-situ oil recovery techniques. The majority of operating and planned in-situ bitumen projects employ thermal techniques to lower the bitumen's viscosity, allowing it to be produced. The viscosity characteristics of the bitumen consequently have a significant effect on production rates and recovery. Bitumen viscosity and chemical composition variation with depth within a single reservoir column has been reported for many heavy oil and oil sand reservoirs in the Western Canadian Sedimentary Basin and elsewhere in the world. This study investigates, through reservoir simulation, the effects of viscosity variation with depth on the SAGD process and the resulting produced oil characteristics. Oil characteristics, including chemical component and viscosity profiles were built into a variety of reservoir simulation models. The simulation results indicate that the produced oil viscosity and component concentration vary as the steam chamber develops. The trend of the produced oil characteristics is related to the original in-situ profiles of and the reservoir flow barriers. In conjunction with oil rate, surface heave, or other available data, the produced oil characteristics may be used to suggest steam chamber development and the presence of barriers or baffles. The presented approach has potential to become a useful technique for SAGD steam chamber growth monitoring and production optimization.

The utilization of autonomous unmanned aerial vehicles (UAVs) has increased rapidly due to their ability to perform a variety of tasks, including industrial inspection. Conducting testing with actual flights within industrial facilities proves to be both expensive and hazardous, posing risks to the system, the facilities, and their personnel. This paper presents an innovative and reliable methodology for developing such applications, ensuring safety and efficiency throughout the process. It involves a staged transition from simulation to reality, wherein various components are validated at each stage. This iterative approach facilitates error identification and resolution, enabling subsequent real flights to be conducted with enhanced safety after validating the remainder of the system. Furthermore, this article showcases two use cases: wind turbine inspection and photovoltaic plant inspection. By implementing the suggested methodology, these applications were successfully developed in an efficient and secure manner.

This paper discusses the comprehensive integrity assessment of feeders fabricated from normalized pipe and elbow piping items subject to Flow Accelerated Corrosion (FAC) during in-service conditions. The arguments are based on the improved mechanistic understanding of FAC; review of international piping rupture events; examinations of removed feeders; burst-pressure tests of prototypical and ex-service feeder piping sections, the minimum acceptable wall thickness for feeder piping; and station feeder life cycle management plans. It is concluded that rupture of feeder pipe due to FAC is a very low probability event.

Abstract The article introduces the process of deep energy retrofit carried out on a residential building in the UK, using a ‘TCosy’ approach in which the existing building is completely surrounded by a new thermal envelope. It reports on the entire process, from establishing the characteristics of the existing building, carrying out design simulations, documenting the off- site manufacture and on-site installation, and carrying out instrumental monitoring, occupant studies and performance evaluation. Multi-objective optimisation is used throughout the process, for establishing the characteristics of the building before the retrofit, conducting the design simulations, and evaluating the success of the completed retrofit. Building physics parameters before and after retrofit are evaluated in an innovative way through simulation of dynamic heating tests with calibrated models, and the method can be used as quality control measure in future retrofit programmes. New insights are provided into retrofit economics in the context of occupants’ health and wellbeing improvements. The wide scope of the lessons learnt can be instrumental in the creation of continuing professional development programmes, university courses, and public education that raises awareness and demand. These lessons can also be valuable for development of new funding schemes that address the outstanding challenges and the need for updating technical reference material, informing policy and building regulations.

Abstract Subcooled flow boiling is frequently encountered in hot assemblies in nuclear power plant. Considerable efforts have been made to improve the understanding of boiling process and prediction of critical heat flux (CHF). In this study, the effects of non-uniform heat input on heat transfer characteristics are further investigated, so that more realistic descriptions of practical systems can be achieved vis-a-vis usual heat input assumptions. A CFD model has been built to predict subcooled flow boiling process in a vertical round pipe. The capability of the model is validated against experimental results in the publication. A variety of non-uniform heat input profiles are tested using this validated CFD model. Results show that a regular triangle-shape heat input profile will cause stronger vapour generation in the middle of the heating region. Also, the risk of reaching CHF may be increased with the position of maximum heat flux moving downstream.

The objective of this paper is to analyze the factors influencing the success of real estate crowdfunding projects in Spain. This type of crowdfunding invests in real estate assets. We analyzed 60 projects published on the Housers platform, a kind of participative platform that uses the lending and equity crowdfunding modalities. These projects have involved around 36,623 investment decisions and have raised a total amount of almost 26 million euros. The empirical analysis is based on ordinary least squares and negative binomial regression. Our main findings reveal that success differs depending on the type of project; in fact, buy-to-sell projects are less successful than development loan projects. In addition, while total return has a positive impact on project success, in the case of risk level and project term, the impact is negative.

The decarbonisation of heating in the United Kingdom is likely to entail both the mass adoption of heat pumps and widespread development of district heating infrastructure. Estimation of the spatially disaggregated heat demand is needed for both electrical distribution network with electrified heating and for the development of district heating. The temporal variation of heat demand is important when considering the operation of district heating, thermal energy storage and electrical grid storage. The difference between the national and urban heat demands profiles will vary due to the type and occupancy of buildings leading to temporal variations which have not been widely surveyed. This paper develops a high-resolution spatiotemporal heat load model for Great Britain (GB: England, Scotland a Wales) by identifying the appropriate datasets, archetype segmentation and characterisation for the domestic and nondomestic building stock. This is applied to a thermal model and calibrated on the local scale using gas consumption statistics. The annual GB heat demand was in close agreement with other estimates and the peak demand was 219 GWth. The urban heat demand was found to have a lower peak to trough ratio than the average national demand profile. This will have important implications for the uptake of heating technologies and design of district heating.