• Energy Research
• other engineering and technologies close
• 7. Clean energy close
• CA close
• IR close
• HK close

The rapid development of advanced metering infrastructure provides a new data source—building electrical load profiles with high temporal resolution. Electric load profile characterization can generate useful information to enhance building energy modeling and provide metrics to represent patterns and variability of load profiles. Such characterizations can be used to identify changes to building electricity demand due to operations or faulty equipment and controls. In this study, we proposed a two-path approach to analyze high temporal resolution building electrical load profiles: (1) time-domain analysis and (2) frequency-domain analysis. The commonly adopted time-domain analysis can extract and quantify the distribution of key parameters characterizing load shape such as peak-base load ratio and morning rise time, while a frequency-domain analysis can identify major periodic fluctuations and quantify load variability. We implemented and evaluated both paths using whole-year 15-minute interval smart meter data of 188 commercial office building in Northern California. The results from these two paths are consistent with each other and complementary to represent full dynamics of load profiles. The time- and frequency-domain analyses can be used to enhance building energy modeling by: (1) providing more realistic assumptions about building operation schedules, and (2) validating the simulated electric load profiles using the developed variability metrics against the real building load data.

This paper presents a novel modified interactive honey bee mating optimization (IHBMO) base fuzzy stochastic long-term approach for determining optimum location and size of distributed energy resources (DERs). The Monte Carlo simulation method is used to model the uncertainties associated with long-term load forecasting. A proper combination of several objectives is considered in the objective function. Reduction of loss and power purchased from the electricity market, loss reduction in peak load level and reduction in voltage deviation are considered simultaneously as the objective functions. First, these objectives are fuzzified and designed to be comparable with each other. Then, they are introduced into an IHBMO algorithm in order to obtain the solution which maximizes the value of integrated objective function. The output power of DERs is scheduled for each load level. An enhanced economic model is also proposed to justify investment on DER. An IEEE 30-bus radial distribution test system is used to illustrate the effectiveness of the proposed method.

Abstract In-core nuclear fuel management is one of the most important concerns in the design of nuclear reactors. Two main goals in core fuel loading pattern design optimization are maximizing the core effective multiplication factor in order to extract the maximum energy, and keeping the local power peaking factor lower than a predetermined value to maintain the fuel integrity. Because of the numerous possible patterns of fuel assemblies in the reactor core, finding the best configuration is so important and challenging. Different techniques for optimization of fuel loading pattern in the reactor core have been introduced by now. In this study, a software is programmed in C# language to find an order of the fuel loading pattern of a VVER-1000 reactor core using the perturbation theory. Our optimization method is based on minimizing the radial power peaking factor. The optimization process launches by considering an initial loading pattern and the specifications of the fuel assemblies which are given as the input of the software. The results on a typical VVER-1000 reactor reveal that the method could reach to a pattern with an allowed radial power peaking factor and increases the cycle length 1.1 days, as well.

Abstract The power system needs to satisfy its customers demand with minimum cost and emission. Fuel cost has straight relationship with energy cost. This paper presents an advanced parallelized particle swarm optimization algorithm (PSPSO) for finding optimal combination of power generation units that minimizes the total fuel cost and emission. In this algorithm, time requirements for solving complex large-scale CEED problem can be substantially reduced using parallel computation and it performs the update of positions and velocities in the end of each iteration. The proposed approach is applied on four test systems and compared with other techniques. The results represent that PSPSO has better convergence than other techniques.

The hydrate-based gas separation for capturing CO2 from flue gas has the characteristics of low energy consumption, simple operation and convenience for the subsequent CO2 storage and utilization. In order to reduce the total cumulative deviation of multi-stage hydration reaction, it is of great importance to establish an accurate thermodynamic model. Based on the vdW–P + CPA model, therefore, we refitted the parameters of the thermodynamic model considering the association between CO2 and H2O. Firstly, the energy parameter α0.5 of H2O and CO2 are developed as the cubic function and the linear function of [1-(T/Tc)0.5], respectively. Then, the calculation parameters of Langmuir absorption coefficient of vdW–P model is refitted based on the temperature dependent binary interaction parameters kij. The following research results are obtained. First, when the novel fitted thermodynamic model is used to predict the density of saturated fluid, the average absolute deviation (AAD) of H2O drops from 1.84% to 0.08% and that of CO2 drops from 4.06% to 2.09%. Second, when it is used to predict the phase equilibrium pressure of the hydrate generated from pure CO2 and pure N2, the AAD is 0.86% and 0.82%, respectively. Third, when it is used to calculate the phase equilibrium condition of hydrate generated from flue gas with different compositions, the AAD is decreased from 15.16% to 5.02%. In conclusion, this novel fitted thermodynamic model is of higher accuracy and it, to some extent, can decrease the total accumulative deviation of multi-stage hydration reaction. The research results provide reference for the actual application of the hydrate-based gas separation for capturing CO2 from flue gas. Keywords: Hydrate-based gas separation, Flue gas, CO2 capture, CO2 thermodynamic model, Multi-stage hydration reaction, Energy parameter, Langmuir absorption coefficient, Prediction

Nowadays, a large part of energy is provided by steam turbines; thus, increasing the efficiency and improving the steam turbines performance are of special importance. The presence of the liquid phase in the low-pressure stage of the steam turbine can cause energy loss, efficiency drop, and erosion/corrosion problems; therefore, one of the essential issues is to identify wet steam flow and try to reduce condensation loss. In order to decrease the liquid fraction, the drainage groove technique can be applied. The drainage groove sucks the water droplets from the turbine blade surface and drains them into the condenser. In this study, the effect of the drainage groove location on the surface of steam turbine blades has been investigated on the condensation, droplet radius, inlet mass flow, erosion rate, liquid drainage ratio, condensation losses, and total drainage ratio. For modeling the condensing flow, the Eulerian–Eulerian approach has been applied. The results show that the location of the drainage groove affects the groove performance and flow pattern in the turbine blade. In the selected drainage, the liquid drainage ratio, condensation losses, and erosion rate are reduced by 7.6%, 12%, and 88%, respectively, compared with the no-drainage groove case. Also, the total drainage ratio is 7.2% in the selected drainage. The outcomes of the present work have been a major step forward in the techniques having a great influence on the lifetime, repair and maintenance, and the output power of steam power generation facilities.

Abstract Commercial potential in developing countries has always received a great attention from international investors, but this is not the case in Waste-to-Energy sector. Waste-to-Energy is bound up with various uncertainties rooted in its long-term nature therefore incorporating risks regarding political matters in developing countries makes it more complex. The present study substantiates the incompatibility of classic valuation methods in risky projects. Consequently, to deal with the riskiness of Waste-to-Energy investment in less developed countries, the combination of binomial tree analysis and Decoupled NPV is proposed. The hybrid approach is deployed to value a Waste-to-Energy project in Iran, and all evidence attest to the robustness of the method. The contribution of this paper can open up new vistas for investing in Waste-to-Energy industry, thus abating the catastrophic effects of landfill gas emissions.

AbstractThe integration of power plants and desalination systems has attracted increasing attention over the past few years as an effective solution to tackle sustainable development and climate change issues. In this light, this paper introduces a novel modelling and optimization approach for a combined-cycle power plant (CCPP) integrated with reverse osmosis (RO) and multi-effect distillation (MED) desalination systems. The integrated CCPP and RO–MED desalination system is thermodynamically modelled utilizing MATLAB and EES software environments, and the results are validated via Thermoflex software simulations. Comprehensive energy, exergic, exergoeconomic, and exergoenvironmental (4E) analyses are performed to assess the performance of the integrated system. Furthermore, a new multi-objective water cycle algorithm (MOWCA) is implemented to optimize the main performance parameters of the integrated system. Finally, a real-world case study is performed based on Iran's Shahid Salimi Neka power plant. The results reveal that the system exergy efficiency is increased from 8.4 to 51.1% through the proposed MOWCA approach, and the energy and freshwater costs are reduced by 8.4% and 29.4%, respectively. The latter results correspond to an environmental impact reduction of 14.2% and 33.5%. Hence, the objective functions are improved from all exergic, exergoeconomic, and exergoenvironmental perspectives, proving the approach to be a valuable tool towards implementing more sustainable combined power plants and desalination systems.

This paper presents an experimental study of indoor thermal environment near a full-scale glass facade with different types of shading devices under varying climatic conditions in winter. Interior glazing and shading temperature, operative temperature and radiant temperature asymmetry were measured for facade sections with roller shades and venetian blinds at different positions. Interior glass surface temperatures can be high during sunny days with low outdoor temperature. Shading systems significantly improved operative temperature and radiant temperature asymmetry during cold sunny days, depending on their properties and tilt angle. During cloudy days the impact was smaller, however the shading layers could still decrease the amount of heat loss through the facade. A transient building thermal model, which also calculates indoor environmental indices under the presence of solar radiation, was developed and compared with the experimental measurements. Part II of this paper uses this validated model with a transient, two-node thermal comfort model (including transmitted solar radiation) for assessment of indoor environmental conditions with different building envelope and shading properties, facade location and orientation.