• Energy Research
• Restricted close
• 12. Responsible consumption close
• IN close
• BE close
• SA close

Wood biomass is turned into industrial fuel through chipping. The efficiency of chipping depends on many factors, including chipper knife wear. Chipper knife wear was determined through a long-term follow-up study, conducted at a waste wood recycling yard. Knife wear determined a sharp drop of productivity (>20%) and a severe decay in product quality. Dry sharpening with a grinder mitigated this effect, but it could not replace proper wet sharpening. Increasing the frequency of wet sharpening sessions determined a moderate increase of knife depreciation cost, but it could drastically enhance machine performance and reduce biomass processing cost. Since benefits largely exceed costs, increasing the frequency of wet sharpening sessions may be an effective measure for reducing overall chipping cost. If the main goal of a chipper operator is to increase productivity and/or decrease fuel consumption, then managing knife wear should be a primary target. (C) 2014 Elsevier Ltd. All rights reserved.

Improper management of pig manure has resulted in environmental problems such as surface water eutrophication, ground water pollution, and greenhouse gas emissions. This study develops and compares 14 alternative manure management scenarios aiming at energy and nutrient extraction. The scenarios based on combinations of thermal pretreatment, anaerobic digestion, anaerobic co-digestion, liquid/solid separation, drying, incineration, and thermal gasification were compared with respect to their energy, nutrient and greenhouse gas balances. Both sole pig manure and pig manure mixed with other types of waste materials were considered. Data for the analyses were obtained from existing waste treatment facilities, experimental plants, laboratory measurements and literature. The assessment reveals that incineration combined with liquid/solid separation and drying of the solids is a promising management option yielding a high potential energy utilization rate and greenhouse gas savings. If maximum electricity production is desired, anaerobic digestion is advantageous as the biogas can be converted to electricity at high efficiency in a gas engine while allowing production of heat for operation of the digestion process. In conclusion, this study shows that the choice of technology has a strong influence on energy, nutrient and greenhouse gas balances. Thus, to get the most reliable results, it is important to consider the most representative (and up-to-date) technology combined with data representing the area or region in question.

As a fast-growing food production industry, aquaculture is dealing with the need for intensification due to the global increasing demand for fish products. However, this also implies the use of more sustainable practices to reduce negative environmental impacts currently associated with this industry, including the use of wild resources, destruction of natural ecosystems, eutrophication of effluent receiving bodies, impacts due to inadequate medication practices, among others. Using multi-species systems, such as integrated multi-trophic aquaculture, allows to produce economically important species while reducing some of these aquaculture concerns, through biomitigation of aquaculture wastes and reduction of diseases outbreaks, for example. Applying mathematical models to these systems is crucial to control and understand the interactions between species, maximizing productivity, with important environmental and economic benefits. Here, the application of some equations and models available in the literature, regarding basic parameters, is discussed – population dynamics, growth, waste production, and filtering rate – when considering the description and optimization of a theoretical integrated multi-trophic aquaculture operation composed by three trophic levels.

Abstract Biogas production is one of the number of tools that may be used to alleviate the problems of global warming, energy security and waste management. Biogas plants can be difficult to sustain from a financial perspective. The facilities must be financially optimized through use of substrates with high biogas potential, low water content and low retention requirement. This research carried out in laboratory scale batch digesters assessed the biogas potential of energy crops (maize and grass silage) and solid manure fractions from manure separation units. The ultimate methane productivity in terms of volatile solids (VS) was determined as 330, 161, 230, 236, 361 L/kg VS from raw pig slurry, filter pressed manure fiber (FPMF), chemically precipitated manure fiber (CPMF), maize silage and grass silage respectively. Methane productivity based on mass (L/kg substrate) was significantly higher in FPMF (55 L/kg substrate), maize silage (68 L/kg substrate) and grass silage (45–124 L/kg substrate (depending on dry solids of feedstock)) as in comparison to raw pig slurry (10 L/kg substrate). The use of these materials as co-substrates with raw pig slurry will increase significantly the biomethane yield per unit feedstock in the biogas plant.

Based on literature, we identify collaboration drivers and partner features for enhancing vertical and/or horizontal collaboration in the chemicals using industries. We further develop constructs for both types of collaboration. A survey-based analysis within the largest chemical cluster worldwide was carried out to verify and to test our literature-based constructs. Using our empirically based results, we develop and propose a framework for Advancing and Stimulating Collaboration (ASC) in the chemical industry. This framework can be used to increase collaborative arrangements within the chemical industry and thereby lead to more sustainable chemical product and process flows and management practices resulting in more sustainable chemical industrial parks.

Earth’s biodiversity and human societies face pollution, overconsumption of natural resources, urbanization, demographic shifts, social and economic inequalities, and habitat loss, many of which are exacerbated by climate change. Here, we review links among climate, biodiversity, and society and develop a roadmap toward sustainability. These include limiting warming to 1.5°C and effectively conserving and restoring functional ecosystems on 30 to 50% of land, freshwater, and ocean “scapes.” We envision a mosaic of interconnected protected and shared spaces, including intensively used spaces, to strengthen self-sustaining biodiversity, the capacity of people and nature to adapt to and mitigate climate change, and nature’s contributions to people. Fostering interlinked human, ecosystem, and planetary health for a livable future urgently requires bold implementation of transformative policy interventions through interconnected institutions, governance, and social systems from local to global levels.

This review gathers information about the current legal requirements related to the emission of ammonia and greenhouse gases from animal housing in 21 out of the 28 EU countries and in 5 non-EU countries. Overall the review shows that most of the included countries have established substantial procedures to limit ammonia emission and practically no procedures to limit greenhouse gas emission. The review can also be seen as an introduction to the substantial initiatives and decisions taken by the EU in relation to ammonia emission from animal housing, and as a notification on the absence of corresponding initiatives and decisions in relation to greenhouse gases. An EU directive on industrial emissions from 2010 and an implementation decision from 2017 are the main general instruments to reduce ammonia emission from animal housing in the EU. These treaties put limits to ammonia emissions from installations with more than 2000 places for fattening pigs, with more than 750 places for sows and with more than 40,000 places for poultry. As an example, the upper general limit for fattening pigs is 2.6 kg ammonia per animal place per year. This review indicates that the important animal producing countries in the EU have implemented the EU requirements, and, that only a few countries with a large pig population, in relation to their geographical size, have implemented requirements that are stricter than what is required by the EU.

AbstractDonor–acceptor dyes are a well‐established class of photosensitizers, used to enhance visible‐light harvesting in solar cells and in direct photocatalytic reactions, such as H2 production by photoreforming of sacrificial electron donors (SEDs). Amines—typically triethanolamine (TEOA)—are commonly employed as SEDs in such reactions. Dye‐sensitized photoreforming of more sustainable, biomass‐derived alcohols, on the other hand, was only recently reported by using methanol as the electron donor. In this work, several rationally designed donor–acceptor dyes were used as sensitizers in H2 photocatalytic production, comparing the efficiency of TEOA and EtOH as SEDs. In particular, the effect of hydrophobic chains in the spacer and/or the donor unit of the dyes was systematically studied. The H2 production rates were higher when TEOA was used as SED, whereas the activity trends depended on the SED used. The best performance was obtained with TEOA by using a sensitizer with just one bulky hydrophobic moiety, propylenedioxythiophene, placed on the spacer unit. In the case of EtOH, the best‐performing sensitizers were the ones featuring a thiazolo[5,4‐d]thiazole internal unit, needed for enhancing light harvesting, and carrying alkyl chains on both the donor part and the spacer unit. The results are discussed in terms of reaction mechanism, interaction with the SED, and structural/electrochemical properties of the sensitizers.