• Energy Research
• Closed Access close
• CN close
• IN close

Abstract Adding high thermal conductive fillers to base materials has been recognized as an efficient way to increase the thermal conductivity of composites materials. The heat conductive path is formed by filler contacts, this is a key point. In this paper, the effects of filler contacts are investigated based on generalized model and isolated model. The results indicate that the thermal conductivity is always linearly increased with the sphere filler contents. However, for cube filler, when the volume content exceeds 10%, the growth of thermal conductivity is accelerated along with filler contents. The 10% filler content is the inflection point and percolation threshold for cube filler. It is much lower than previously reported. The effect of filler contacts is very small for sphere fillers. Meanwhile, the deviation of thermal conductivity between two-dimensional and three-dimensional model is also very small for sphere filler. The cube fillers have substantial effects on the consequently thermal conductivity than sphere fillers. A series of new three-dimensional generalized model are proposed by numerical method. The filler contacts are considered in this model, the deviation with the experiment tested is in an acceptable range at wide filler contents.

Abstract In this paper, a novel ejector-based multi-evaporator refrigeration system using R134a is proposed to meet different working modes of refrigerated trucks running in tropical regions. The Computational Fluid Dynamics (CFD) simulation is implemented to research the performance of ejectors utilized in both air conditioning - refrigerating mode and air conditioning - freezing mode. Consequently, crucial ejector geometrical parameters such as area ratio (AR), nozzle exit position (NXP), lengths of primary nozzle and diffuser are optimized for each mode. Moreover, a novel approach by taking the deviation of the entrainment ratio or secondary mass flow rate over the deviation of the geometrical parameter into account to evaluate the ejector performance sensitivity to each geometrical parameter is first time presented to the best of the authors’ knowledge. The results show that: 1) Area ratio, NXP, lengths of primary nozzle and diffuser of the ejector in the air conditioning - freezing mode are almost twice as those in the air conditioning - refrigerating mode; 2) The performance of both ejectors is primarily influenced by area ratio and NXP; 3) The proposed sensitivity indicator can better evaluate the sensitivity of the ejector performance to geometrical parameters.

Abstract The kinetics of CO 2 absorption in unloaded aqueous ammonia solution were measured using a string of discs contactor with the aqueous ammonia concentrations ranging 0.9–5.4 kmol/m 3 and temperatures ranging 298.3–321.9 K. The reaction rates strongly increase with the concentration and less strongly with temperature. Both the termolecular and zwitterion models were applied in this study as amine solutions. The parameters for both of the models were interpreted. The kinetic rate constants for CO 2 absorption in aqueous ammonia were compared with those for other amines and were found to be around 1/10 that for monoethanolamine. The fitting results for the termolecular mechanism seem more robust than those for the zwitterion mechanism from a statistical perspective.

A cost efficient synergistic strategy combining mild alkaline pretreatment (0.5-5% NaOH at 70 °C for 60 min) and bovine serum albumin (BSA) blocking of lignin was evaluated for effective conversion of poplar. The highest glucose yield of 69.2% was obtained for 5% alkaline pretreated sample, which was 4.4 times that of untreated sample. The enhanced enzymatic hydrolysis was attributed to significant hemicelluloses removal with limited delignification. Delignification mainly occurred in secondary wall, leading to more open cell wall structure, thus facilitating better transport of enzyme. Hemicelluloses removal helped split adjacent microfibrils, thus increased the specific sites for cellulase binding. After BSA addition in enzymatic hydrolysis, cellulose conversion further improved to 78.4% with 33% reduction of cellulase dosage due to decreased non-specific adsorption of cellulase on residual lignin. The utilization of synergistic alkaline pretreatment - BSA strategy may improve the overall economics of biomass conversion and successful commercial implementation of biorefineries.

With the rapid development of the wearable devices and flexible supercapacitors (FSCs), urgent demand for electrodes with high specific capacitance and excellent flexibility have been put forward. Herein, a self-standing conducting polymer hydrogel electrode has been successfully synthesized by in situ polymerization of aniline (ANI) in aqueous solution of polyvinyl alcohol (PVA), phytic acid (PA) and sodium chloride (NaCl). The prepared PANI/PVA/NaCl (PPN) hydrogel electrode shows high specific capacitance (1544 mF cm−2 at current density of 1 mA cm−2), good flexibility (elongation at fracture of 110%), satisfactory electrochemical stability (92% capacitance retention after 500 repeated bending cycles) and excellent cycling stability (78.2% capacitance retention after 10000 cycles) due to the uniform 3D interconnected structure driven by NaCl pseudo template. In order to further explore the potential application prospects of the synthesized hydrogel in flexible devices, a series of all-hydrogel-state FSCs are assembled based on the prepared PPN hydrogel electrodes and typical PVA/H2SO4 electrolyte. The assembled FSCs exhibit high energy density of 51.1 μWh cm−2 at power density of 250 μW cm−2 and long-life stability of 81.10% capacitance retention after 10000 charge/discharge cycles. This work provides a new synthesis strategy for the high performance energy storage electrodes and devices.

Abstract Four types of via-filling models are developed in this paper, considering distinct chemical behaviour of additives used in the TSV electroplating. The surface convection, surface diffusion and the effect of the curvature are considered in the equation of the coverage of additives, which is solved by a weak form of the PDEs. The simulation results of the different models are compared. Sensitivity analyses of the important parameters in the four models are conducted. Thus, the influences of parameters on the via-filling process are investigated. Conclusions are drawn based on the analysis of the developed numerical models.

Abstract The Chinese government has taken measures to realize energy-savings and emission reductions, such as promoting innovations, adjusting the industrial structure, balancing regional development, and reforming markets. The aim of this paper is to assess the effects of these measures on China's CO2 emissions by using a newly proposed decomposition approach, which identified eight new factors related to the above realistic measures, i.e., energy saving and production technologies, industrial energy and production efficiencies, regional energy and production efficiencies, and pure energy and production efficiencies. The main findings indicate benefits from considerable technological progress in energy-saving and production during 2000–2016 period, and two technological factors contributed the most to emissions abatement and cumulatively reduced 5372.43 Mt and 1291.72 Mt CO2 emissions. The efforts of industrial restructuring promoted energy and production efficiency improvement, which further facilitated emission reduction. In contrast, the pure energy and production efficiency changes cumulatively led to 1080.26 Mt and 1135.85 Mt CO2 emissions growth during the whole sample period, suggesting that severe resource misallocation problems may exist in both the energy market and output market. Additionally, the Chinese government failed to narrow the technology gap between developed regions and underdeveloped regions, further restricting emission reduction.

This study focused on the effects of plant compositions on removal rates of pollutants in microcosms through investigating rhizosphere microbial populations, photosynthetic efficiency and growth characteristics. Mixed-culture groups improved the removal efficiency of TN and TP significantly but exhibited lower COD removal rates. Total plant biomasses were improved as the species richness increased, but the N/P content in the plants was mainly affected by the type of species. The mixed-culture groups showed lower photosynthesis rates and oxygen supply generated from roots under high irradiation. Microbial communities of the cultured groups in the rhizosphere exhibited significant differences. According to principal component analysis (PCA), the fungi were the typical microbes of SPA, SPAB, and SPABC, resulted in improvement in nutrient accumulation. These results demonstrated that a mixed culture strategy can represent the overyielding of biomass, promote the photo-protection mechanism, and will further increase the removal rates of pollutants in a constructed wetland.

The gas content is critical parameter in the shale gas exploration and production. The direct method was used to determine the shale gas content and the apparatus were made by ourselves. It were described the gas content test procedure, mathematic model and data processing in the paper. The adsorb gas and residue gas can be directly obtain from test, and the lost gas was estimated by the initial rate of adsorb gas. The shale gas contents from Sichuan basin are from 1.15 to 1.84 m3/ton, the average value is 1.64 m3/ton. Lost gas is the major gas in the shale and increasing with the lost time. Consequently, the shale should be sealed in the canister as soon as possible to decrease the lost time during the test. It also can enhance the accuracy of gas content. There are a great member of nano-pore and fracture in the organic matter, so that more TOC of shale are more gas content.