• Energy Research
• 2016-2025close
• Closed Access close
• Restricted close
• Open Source close
• IN close
• IT close
• DE close
• NL close

Abstract Three-dimensional (3D) metal halide perovskite solar cells (PSCs) have a power conversion efficiency that is now comparable with conventional silicon solar cells. For PSC applications to succeed in the market, long-term reliability under open-air conditions is essential. Recent experiments have shown that two-dimensional (2D) perovskites seem to exhibit good stability due to the presence of hydrophobic organic spacers, but 2D PSCs are incapable of generating and transporting a large amount of charge due to their extended optical bandgaps. Mixed dimensional perovskites with dimension lies between 2D and 3D recently became a promising candidate to sustain long-term stability and high performances concurrently to address this obstacle. The current research article presents the finding of simulation-based studies performed on novel device architecture consisting of ITO/Nb-Ti2O3/3D Perovskite/2D Perovskite/Spiro-OMeTAD/Au. Using optical simulation features of SCAPS, absorption of light is computed in the proposed device. The computational results show that the thickness of the 2D perovskite layer badly affects the solar cell parameters. A thin 2D perovskite behaves as a capped coating that avoids the deterioration of 3D perovskite in open-air environments. The effect of a multivalent defect in the 3D perovskite layer is mathematically modelled, and their impact on overall performance parameters are analyzed. The findings are compared to the same configuration results, except where the absorber layer’s multivalent defect has been substituted by a neutral defect of the same defect density of about (1011 cm−3). Results show that the multivalent defect leads to an underestimation of the efficiency by 4.2%.

Abstract A unique large scale pilot plant of the CellFlux thermal energy storage concept is experimentally investigated. This storage concept consists of a regenerator type thermal energy storage volume, which is coupled to a finned tube heat exchanger by a circulating intermediate working fluid. The system investigated in this work operates at a temperature of 390 °C and uses air as intermediate working fluid which is conveyed by a centrifugal fan. The storage volume has a bed length of over ten meters and is of a novel design, where the air flows in horizontal direction. Since this approach could cause a flow maldistribution, a thorough analysis is of major interest for the accuracy of subsequent numerical simulations. The experiments reveal that the mass flow along the centerline can be up to 20% higher than the mean bulk flow. A significant maldistribution between top and bottom area, however, is not observed. As an alternative to the typically used rock filling, the storage volume is equipped with standard hollow bricks. These bricks are cost effective but do not have a well-defined shape. Thus, the predictability of the pressure drop by correlations found in the literature is unclear. It turns out that the measured pressure drop is evenly distributed in axial flow direction but generally higher than expected from the assumption of pure channel flow. Further experiments are conducted to validate the heat capacity of the bricks and to derive a correlation for the inner heat transfer between bricks and storage walls. Eventually, the aim of the experimental investigation is a general proof of concept as basis for the numerical investigation. Thus, all specifications of the plant and the storage material are provided. The plant is analyzed towards plausibility of heat losses, showing that heat losses can be predicted well within the given uncertainties.

Environment preservation, energy, and the growing economy are becoming strongly interconnected themes requiring new solutions to be exploited. An example of this interconnection is the demand for the development of almost zero-energy buildings, i.e. buildings capable to be almost autonomous from external energy supply or at least not dependent on the energy supply from utilities. The actual conception of a zero energy building is a very complex system formed by several subsystems, with the consequence that costs are very high and reliability relatively low. The aim of this research program is to deepen the possibility to employ the Stirling engine and cooler technology to lower the number of components required in a near zero-energy building, increase the efficiency, and contemporary raise the reliability of the overall system. Stirling cooler could be used to convert mechanical work into heating and cooling effects and produce the temperature difference by the expanding and compressing the working fluid. A similar concept of the Stirling cooler could also be adopted to develop a heat pump. Compared to the traditional vaporcompression refrigeration systems, the Stirling coolers are of higher efficiency and with no components like compressor, expansion valve, evaporator, or condensers. Therefore, they are considered to be clean cooling devices. On the other hand, the Stirling engine is an external combustion engine, which is compatible with a variety of thermal sources, such as solar radiation, waste heat, geothermal energy, combustion, and so on. With the heat input to the hot end of the engine, the Stirling engine could be operated to produce mechanical work/electricity at high thermal efficiency. In principle, the Stirling machines are capable to provide all the forms of energy (heat, cool, and electricity) that form the almost total energy load of a building.

The study evaluates the potential of different vegetable wastes namely, composite vegetable waste (CVW), potato waste (PW), sweet potato waste (SPW) and yam waste (YW) as an alternative feedstock for the production of renewable sugars. Thermal assisted chemical pretreatment followed by enzymatic saccharification yielded maximum sugars (0.515 g/g CVW, 0.56 g/g PW, 0.57 g/g SPW and 0.56 g/g YW) with total carbohydrate depolymerization of 95.01%, 88.30%, 90.32% and 88.59% respectively. Obtained sugars were valorized into bioethanol through fermentation using S. cerevisiae by optimizing the pH and temperature. The highest ethanol yield of 251.85 mg/g was obtained from SPW at 35°C followed by YW (240.98 mg/g), PW (235.4 mg/g) and CVW (125.6 mg/g) at pH 5.0. Utilizing the abundantly available vegetable wastes as a renewable feedstock for reducing sugars and subsequent bioethanol production will influence the economics and sustainability of the process positively in circular biorefinery format.

Objective The current guidelines suggest alcohol septal ablation (ASA) is less effective in hypertrophic obstructive cardiomyopathy (HOCM) patients with severe left ventricular hypertrophy, despite acknowledging that systematic data are lacking. Therefore, we analysed patients in the Euro-ASA registry to test this statement. Methods We compared the short-term and long-term outcomes of patients with basal interventricular septum (IVS) thickness <30 mm Hg to those with ≥30 mm Hg treated using ASA in nine European centres. Results A total of 1519 patients (57±14 years, 49% women) with symptomatic HOCM were treated, including 67 (4.4%) patients with IVS thickness ≥30 mm. The occurrence of short-term major adverse events were similar in both groups. The mean follow-up was 5.4±4.3 years and 5.1±4.1 years, and the all-cause mortality rate was 2.57 and 2.94 deaths per 100 person-years of follow-up in the IVS <30 mm group and the IVS ≥30 mm group (p=0.047), respectively. There were no differences in dyspnoea (New York Heart Association class III/IV 12% vs 16%), residual left ventricular outflow tract gradient (16±20 vs 16±16 mm Hg) and repeated septal reduction procedures (12% vs 18%) in the IVS <30 mm group and IVS ≥30 mm group, respectively (p=NS for all). Conclusions The short-term results and the long-term relief of dyspnoea, residual left ventricular outflow obstruction and occurrence of repeated septal reduction procedures in patients with basal IVS ≥30 mm is similar to those with IVS <30mm. However, long-term all-cause and cardiac mortality rates are worse in the ≥30 mm group.

The development of photobioreactor is important for sustainable production of renewable fuels, wastewater treatment and CO2 fixation. For the design and scale-up of a photobioreactor, CFD can be used as an indispensable tool. The present study reviews the recent status of computational flow modelling of various types of photobioreactors, involving fluid dynamics, light transport, and algal growth kinetics. An integrated modelling approach of hydrodynamics, light intensity, mass transfer, and biokinetics in photobioreactor is discussed further. Also, this reviews intensified system to improve the mixing, and light intensity of photobioreactors. Finally, the prospects and challenges of CFD modelling in photobioreactors are discussed. Multi-scale modelling approach and development of low-cost efficient computational framework are the areas to be considered for modelling of photobioreactor in near future. In addition, it is necessary to use process intensification techniques for photobioreactors for improving their hydrodynamics, mixing and mass transfer performances, and algal growth productivity.