• Energy Research
• Closed Access close
• Embargo close
• IN close
• GB close
• AU close

Abstract Gold nanoparticles (Au-NPs) seeded plasmonic nanofluids (PNFs) have shown promising results in overall performance enhancement of direct absorption solar collector (DASC) due to localized surface plasmon resonance (LSPR) effect. For the work presented here, Au-NPs were synthesized by the wet chemical method and were utilized to prepare plasmonic nanofluid. The surface plasmon resonance peak of Au-NPs was observed at 531 nm using UV–Visible spectrophotometer study. The testing for performance enhancement of gold plasmonic nanofluid (GPNF) laden DASC so far is limited to laboratory scale setups or simulation studies. Considering the dearth of outdoor experimental studies, an attempt has been made in the present study to evaluate the thermal performance of Au-NPs (∼40 nm) based nanofluid (∼0.0002 wt%) in full scale DASC. The experiments have been performed at different flow rates under clear sky outdoor conditions in winter season at Jalandhar, India. The maximum collector outlet temperature was measured to be 55 °C with GPNF which is about 7 °C higher than the maximum outlet temperature obtained with de-ionized water as working fluid. Thermal efficiency with GPNF is about 33% higher than de-ionized water at the optimal flow rate of 0.030 kg/s.

Abstract An orange and an apple juice each containing 250–385 ppm tin were under suspicion of having caused an outbreak of food poisoning in Kuwait in 1967 but did not cause any toxic signs when fed to pigeons, cats and dogs. One cat out of 11 vomited when fed an orange juice containing 540 ppm tin derived from the container, and with juices containing 1370 ppm tin, 20–30% of the cats vomited but none of the dogs was affected. Fruit juices containing 2000 ppm tin caused vomiting in up to 40% of the cats. Modification of orange juices with a high tin content by addition of nitrate or ethanol or by adjustment of the pH from 3 to 6 did not affect the incidence of vomiting. No toxic signs were produced in rats given fruit juices containing added tin salts up to a level of 995 ppm or in rats and cats given aqueous solutions of tin salts (up to 1200 ppm tin) in citric acid. Solid foods containing tin derived from the containers up to the highest level obtainable (470 ppm) had no toxic effect when fed to dogs and cats. Five human volunteers showed no toxic signs after drinking fruit juices containing 498, 540 or 730 ppm tin derived from the containers, but all five had some gastro-intestinal disturbance after drinking a fruit juice containing 1370 ppm tin. A repeat experiment with the latter juice had no effect in four of the volunteers and only mild symptoms in the fifth. In rats and cats, there was no evidence of tin absorption 24 hr after ingestion of fruit juices containing high levels of tin. No tin was recovered from the urine and in the rats 99% was recovered from the faeces. Only minute amounts of tin could be found in the body, apart from the alimentary tract, of a rat that had been given orange juice with a high tin content ad lib. instead of drinking water for 7 days. It is concluded that toxic signs follow the drinking of tin-containing fruit juices by man and cats only with tin levels of approximately 1400 ppm and above, that there is no evidence from these experiments that toxicity is due to the absorption of tin and that the most likely cause is local irritation of the mucous membrane of the alimentary tract.

For zero‐defect wave soldering of double‐sided and multilayer printed circuit boards, the copper through‐hole‐plating must be impervious to gas generated in the laminate for the period of a few seconds while the solder is molten. The kinetics of the gas evolution during soldering have been related quantitatively to the integrity of the plated copper. This in turn is related to the quality of the electroless copper (evaluated using the backlighting test), the nature and distribution of the catalyst (evaluated using X‐ray photoelectron spectroscopy) and the methods and effectiveness of the hole‐wall preparation (evaluated using scanning electron microscopy). The relevance of laboratory measurements has been confirmed on a wide range of industrial production plating lines.

Abstract DC microgrids have received wide interest in recent times because of the advantages related to improved power transfer capability, high efficiency, compatibility with distributed energy resources (DER) and reduced losses. However, the adoption of DC microgrids has been restricted because of the challenges in designing a reliable protection scheme. The challenge results from the high magnitude of the fault current without zero crossing, coupled with the requirement of high rapidity in fault detection. The scenario is further complicated during the variation in operational dynamics of microgrid either due to weather intermittency or network reconfiguration arising out of DER outage. Non-addressal of the above issues results in reduced grid resilience because of possible relay malfunction during stressed scenarios. In this regard, an ensemble classifier-based protection scheme has been proposed for DC microgrid with adaptability to system reconfiguration and weather intermittency. The adaptiveness has been achieved by online identification of network topology, while immunity to weather variation is attained by stochastic modelling of solar irradiance and wind speed. The use of local information for executing the protection tasks avoids the issues related to data loss and latency in the communication link. The task of operating mode detection, topology identification, fault detection/classification and section identification have been formulated as a set of classification problems and further solved using a random subspace sampling-based ensemble classifier technique. The reliability of the proposed scheme has been extensively validated for a wide range of fault scenarios involving wide variation in network topology, weather condition and fault parameters.

Abstract Two office layouts with high and low levels of thermal control were compared, respectively traditional cellular and contemporary open plan offices. The traditional Norwegian practice provided every user with control over a window, blinds, door, and the ability to adjust heating and cooling. Occupants were expected to control their thermal environment to find their own comfort, while air conditioning was operating in the background to ensure the indoor air quality. In contrast, in the British open plan office, limited thermal control was provided through openable windows and blinds only for occupants seated around the perimeter of the building. Centrally operated displacement ventilation was the main thermal control system. Users’ perception of thermal environment was recorded through survey questionnaires, empirical building performance through environmental measurements and thermal control through semi-structured interviews. The Norwegian office had 35% higher user satisfaction and 20% higher user comfort compared to the British open plan office. However, the energy consumption in the British practice was within the benchmark and much lower than the Norwegian office. Overall, a balance between thermal comfort and energy efficiency is required, as either extreme poses difficulties for the other.

Abstract Designing a high-performance hydrofoil is a fundamental challenge for the current turbine blade designers. In this paper, the performance of S1210 hydrofoil, commonly used in the tidal current turbine blades, in presence of (i) Vortex Generators (VGs), and (ii) modified trailing edge is numerically studied. The results show that attaching counter-rotating VGs near the trailing edge of the foil can increase the lift coefficient by 17% and delay the stall angle from 10° to 12°. Constructing a rounded and thicker trailing edge can help to improve the hydrodynamic performance by increasing the lift coefficient by 13.5%. The combination of VGs (located near the trailing edge) and rounded trailing edge can increase the glide ratio significantly. These observations have been explained by plotting the pressure coefficients and velocity profiles at different locations on the foil surface. The findings will be useful to manufacture a stronger blade profile and extract more power from the current turbines that operate at wide current speed variation.

Longitudinal flow through central subchannel structures in an array of fuel rods in a nuclear reactor plays an important role in removing the heat generated inside the fuel rods. In this paper, an entropy generation analysis has been carried out for assessment of the performance of an infinite triangular as well as a square subchannel for single-phase forced turbulent flow. The performance is evaluated with the objective function being the overall entropy generation in a central subchannel. Various constraints such as dimensionless flow area subtended by the array of rods, pitch to diameter ratio for the configuration of rod bundles and volumetric heat generation to power density ratio of the subchannel imposed by power restrictions have been considered. The parameters include the dimensionless wall heat flux, duty parameter, length to diameter ratio for fuel rods, Reynolds number etc. It has been observed that for a pitch to diameter ratio constraint the square subchannel generates lesser amount of entropy and thus more acceptable compared to triangular structure. For the same constraint the optimum Reynolds number shifts towards higher value compared to triangular one. For dimensionless flow area constraint, on the other hand, the analysis reveals completely reverse phenomenon.

Abstract Thermal energy storage systems based on Phase change materials (PCM) are an attractive option to bridge the temporal and spatial gap between the energy demand and supply. But, these systems possess poor thermal conductivity causing reduced rate of heat transfer. The objective of the present study is to numerically analyze the melting process in an optimized finned latent heat storage system dispersed with varying volume fraction of Graphene nano plates (GNP). The individual effect of incorporating fins, GNP and a combination of both at different volume fraction has been studied. Effective thermal conductivity of nano-composite PCM has been theoretically evaluated including the effect of aspect ratio, interfacial thermal resistance, anisotropy, non-linear effects as well as concentration for the dispersed GNP. In this work, Dynamic differential scanning calorimetry tests are performed to evaluate the phase change temperature, latent heat and specific heat of the sugar alcohol (d- mannitol). Transient variation of liquid fraction, average temperature and radial/longitudinal temperature differentials are presented which would be useful for designing medium temperature (160–200 °C) storage systems for various applications. Fin height is varied to obtain an optimum fin size such that natural convection currents are not impeded. Various heat transfer models (including natural convection) are analysed using the actual plant data of a double effect solar absorption system at different arrangements of fins and GNP. Effect of Reynolds number and inlet temperature of HTF on the system performance have also been studied. A reduction of 68% in total melting time is observed in finned LHSS with 5% GNP as compared to a conventional system.