• Energy Research
• 7. Clean energy close
• 6. Clean water close
• IN close
• JP close
• UA close

This paper presents the performance analysis of different types of energy-efficient lamps used in indoor lighting applications. The objectives of this paper is to investigate and compare the electrical power quality and different photometrical parameters of few energy efficient lamps widely used in indoor applications now-a-days i.e. Fluorescent Tube Lights (FTLs), Compact Fluorescent Lamps (CFLs) and white Light Emitting Diodes (LEDs). These energy efficient lamps produce high total harmonic distortion but operate at high power factor. Few samples of commercial energy saving lamps are tested with different combinations of control gears and their performances are compared. The electrical and photometrical parameters are presented to verify the effectiveness of the lamp-ballast combinations. The result shows that although these lamps provide higher luminous efficacy, higher illumination but also high level of THD. The result also shows that the performance of these lamps do not change significantly with the change of normal commercial available control gears.

Biogas is a viable alternative for supplying clean and sustainable energy. Despite all manner of policy measures introduced by the Government of India, biogas is not widely used in India. This article tries to identify factors that influence the decision to adopt biogas at household level. We examine a conceptual framework empirically in which a household wants to maximize utility from biogas by using the India Human Development Survey (IHDS) I, which is a nationally representative, multi-topic survey. By applying both maximum likelihood and penalized likelihood methods (Firthlogit) of logistic regression on a sample size of almost 10,384 households, it has been found that wealthy people are more likely to adopt biogas compared to the marginalized section of the society. We recommend more inclusive policy measures for the weaker section of the society to create an enabling environment to make it a self-promoting technology.

The influence of various solvents (H2O, CH3OH, and C2H5OH) on product distribution and nature of products during hydrothermal liquefaction of sargassum tenerrimum algae has been examined. Hydrothermal liquefaction was performed using H2O (260, 280 and 300°C) and organic solvents CH3OH and C2H5OH (280°C) for 15min. The use of organic solvents significantly increased the yield of bio-oil. In the case of liquefaction with CH3OH and C2H5OH, the bio-oil yield was 22.8 and 23.8wt.% respectively whereas the bio-oil yield was 16.33wt.% with H2O. GC-MS analysis of the liquid products indicated the presence of various organic compounds including aromatics, nitrogenated and oxygenated compounds and higher selectivity amount of ester compounds were observed in the presence of alcoholic solvents. NMR and FT-IR showed that present of solvents have an effect on the decomposition of sargassum tenerrimum algae.

This paper presents experimental results of the impact of CO(2) co-feed on a gasification/pyrolysis process for various feedstocks (biomass, coal, and municipal solid waste (MSW)). Various feedstocks were thermo-gravimetrically characterized under various atmospheric conditions and heating rates. A substantial amount of char burn out was identified in the presence of CO(2) via a series of thermo-gravimetric analysis tests, which enabled high conversion of final mass (approximately 99%) to be achieved. The impact of CO(2) co-feed on the volatilization regime during the pyrolysis/gasification process was not apparent at a heating rate of 10-40 degrees C min(-1). However, the impact of CO(2) on the volatilization regime at a fast heating rate (950 degrees C min(-1)) was substantial. For example, significant enhancement in the generation of CO, by a factor of approximately 2, was observed in the presence of CO(2). The generation of major chemical species, such as CH(4) and C(2)H(4), were enhanced, but this was not as apparent as in the case with CO. In addition, introducing CO(2) to the pyrolysis/gasification process enabled the amount of condensable liquid hydrocarbons, such as tar (approximately 30-40%) to be significantly reduced in the presence of CO(2), in that injecting CO(2) into the pyrolysis/gasification process expedites cracking the volatilized chemical species. Experimental work confirmed that biomass and MSW could be feasible and desirable feedstocks for the pyrolysis/gasification process as these feedstocks can be easily treated compared to coal. To extend this understanding to a more practical level, various feedstocks were tested in a tubular reactor and drop tube reactor under various experimental conditions.

The Western Rajasthan commonly known as the ‘Indian Thar Desert’ is characterised by harsh climatic conditions with active dunal activities. Precipitation (150–420 mm/yr) is far lower than evapotranspiration potentials (1500–2000 mm/yr). Ground water is limited and often brakish and high (75–100 m) water table. Solar intensity in the region varies from 5.85 to 6.44 kWh/m2/day. Further, peculiarity of the region is that sun is available for 345–355 days in a year, the area being highly scarce in rainfall. On an average, rains occur only for 10.4–20.5 days in a year in the Thar Desert. Therefore, there is high scope to harness solar energy for useful purposes. Considering these solar energy technologies for entrepreneurs, the detailed cost analysis has been worked out and presented. With initial investment of Rs (Indian Rupees) 3.50 lakhs for solar drying projects for handling 60,000 kg fresh vegetables annually (300 working days/yr), the payback period and average net annual returns come to 2.17 years and ...

COVID-19 pandemic has brought tremendous environmental burden due to huge amount of medical wastes (about 54,000 t/d as of November 22, 2020), including face mask, gloves, clothes, goggles, and sanitizer/disinfectant containers. A proper waste management is urgently required to mitigate the spread of the disease, minimize the environmental impacts, and take their potential advantages for further utilization. This work provides a prospective review on the possible thermochemical treatments for those COVID-19 related medical wastes (CMW), as well as their possible conversion to fuels. The characteristics of each waste are initially analyzed and described, especially their potential as energy source. It is clear that most of CMWs are dominated by plastic polymers. Thermochemical processes, including incineration, torrefaction, pyrolysis, and gasification, are reviewed in terms of applicability for CMW. In addition, the mechanical treatment of CMW into sanitized refuse-derived fuel (SRDF) is also discussed as the preliminary stage before thermochemical conversion. In terms of material flexibility, incineration is practically applicable for all types of CMW, although it has the highest potential to emit the largest amount of CO2 and other harmful gasses. Furthermore, gasification and pyrolysis are considered promising in terms of energy conversion efficiency and environmental impacts. On the other hand, carbonization faces several technical problems following thermal degradation due to insufficient operating temperature.

Abstract Gas crossover is an unavoidable phenomenon in proton exchange membrane fuel cells. Gas crossover leads to heat and water generations without conducting any useful works, hence increasing fuel consumption. Particularly, Gas crossover can result in the degradation and formation of pinholes inside the membrane. Therefore, the gas crossover is a critical factor significantly affecting the durability of a fuel cell and quality of the membrane. Herein, we numerically investigate the effects of gas crossover across the membrane in a proton exchange membrane fuel cell. A two-dimensional, two-phase, steady state model of the gas crossover using the partial differential equation solver FreeFem++, was built to investigate the crossover characteristics of hydrogen and oxygen across the membrane versus changes in operating conditions and various geometric structure of components in the proton exchange membrane fuel cell. Results indicated that higher equivalent weight of Nafion® is required to significantly decrease gas crossover phenomenon while the cell performance was reduced negligibly. In addition, as the increase in the stoichiometric flow ratio and channel length, the gas crossover decreased and the cell performance improved.

The potential of deoiled Azolla pinnata biomass (DAB) as electrode and substrate was evaluated for microbial fuel cell (MFC) operation. The anode electrode was fabricated using biochar obtained by subjecting DAB to pyrolysis at 600 °C, while the reducing sugars after hydrolysis of DAB by acid pretreatment was used as substrate. The post pyrolyzed biochar (P-DAB) was characterized for structural and elemental functionalities using SEM, XRD and Raman spectroscopy, whereas the reducing sugar obtained from hydrolyzed DAB (H-DAB) was analyzed for its composition. Experimental results indicated that at a given 3 g COD/L resulted in a voltage of 382 mV with 65.6% of COD reduction in closed circuit (CC) mode of operation. Cyclic voltammetric analysis depicted maximum oxidative and reductive peak currents of 3.42 mA and -4.0 mA. Noticeable peaks were also identified in CC (-0.2 V to +0.2 V and -0.19 V to -0.3 V) and OC (+0.2 V to +0.4 V and -0.1 V to -0.3 V) corresponding to complex IV cytochrome c couples (cytochrome Cox (Cyt Cox)/cytochrome Crd (Cyt Crd)), signifying the participation of electron carriers during electron transfer. The microbiome diversity showed dominance of Proteobacteria, a phylum known for exo-electrogenic bacterial species. The DAB-derived products account to environmental sustainability and support circular bioeconomy in a biorefinery mode.

Thermoelectric (TE) material is a class of materials that can convert heat to electrical energy directly in a solid-state-device without any moving parts and that is environmentally friendly. The study and development of TE materials have grown quickly in the past decade. However, their development goes slowly by the lack of cheap TE materials with high Seebeck coefficient and good electrical conductivity. Carbon nanotubes (CNTs) are particularly attractive as TE materials because of at least three reasons: (1) CNTs possess various band gaps depending on their structure, (2) CNTs represent unique one-dimensional carbon materials which naturally satisfies the conditions of quantum confinement effect to enhance the TE efficiency and (3) CNTs provide us with a platform for developing lightweight and flexible TE devices due to their mechanical properties. The TE power factor is reported to reach 700–1000 μ W / m K 2 for both p-type and n-type CNTs when purified to contain only doped semiconducting CNT species. Therefore, CNTs are promising for a variety of TE applications in which the heat source is unlimited, such as waste heat or solar heat although their figure of merit Z T is still modest (0.05 at 300 K). In this paper, we review in detail from the basic concept of TE field to the fundamental TE properties of CNTs, as well as their applications. Furthermore, the strategies are discussed to improve the TE properties of CNTs. Finally, we give our perspectives on the tremendous potential of CNTs-based TE materials and composites.