• Energy Research
• IR close
• IQ close

Plot design and harvesting Twelve sampling plots (16 m × 16 m) in three P. deltoides plantations were established based on systematic random design. To minimize edge effects, surrounding rows were not considered during sampling. The age of the stands was 18-20 years old. In each sampling plot, the DBH (diameter at breast height 1.3 m above the ground) of the individual trees was measured with a caliper in two perpendicular directions and the mean DBH determined. Tree height was measured by Haglöf-Vertex IV hypsometer. Based on the DBH and height measurements, 10 DBH classes from 15 to 42 cm (3 cm intervals) were established. The value of each DBH class represented the central value (i.e., class 15 included all DBH from 12.5 to 17.5 cm). In each DBH class, one representative tree was selected and harvested for a total of 10 P. deltoides trees. Measurements of bark percentagesThe stems of harvested trees were marked and cut into 2 m-segments. The mid-length diameter of each segment was measured outside the bark in two perpendicular directions with a caliper to determine the mean diameter. A 5 cm-thick disc was cut from the middle of each segment. A total of 123 discs were obtained and brought to the laboratory. All the discs were arranged into 2-cm wide diameter classes. The value of each disc class represents the central value (i.e., class 20 included all discs whose diameters ranged from 19.5 to 20.5 cm). Bark was separated from the wood using a peeler knife for each disc. Fresh bark and wood were weighted separately, oven-dried at 80 °C until constant weight, and the oven-dry weight measured. The bark percentage of each disc was considered as bark percentage of a 2 m-segment for fresh and dry weight. Finally, the bark percentage of the whole stem in each DBH class was calculated by adding the 2 m-segments. Bark biomass as an energy source has a high economic value. Bark content variations and production helps recognize the potential of this bioenergy source spatially before harvesting. The percentage of fresh and dry bark in Populus deltoides grown under a monoculture system was examined in the temperate region of northern Iran. Diameter at breast height (DBH) and total height data were analyzed based on an initial inventory. Ten sample trees were felled, separated into 2 m-segments, and weighted in the field. A 5-cm-thick disc from each segment was extracted for determining fresh and dry bark percentages. These were statistically significantly different in disc diameter classes and decreased with increasing disc diameters. Bark percentage of the disc classes ranged from 21.8 to 24.4% in small-sized diameters to 8.1‒9.3% in large-sized diameters. The differences between fresh and dry bark percentages depended on water content variations. Allometric power equations were fitted to data of fresh and dry bark percentages and disc diameters as well as DBH. The values of R2 ranged from 0.89 to 0.90. In addition, allometric power equations provided the best fits for relationships between total stem dry biomass, dry bark biomass, and DBH, R2 = 0.986 and 0.979 for the total stem dry biomass and stem dry bark biomass, respectively. The allometric models can be used to estimate bark percentage and bark production of P. deltoides in segments and for the whole stem for a wide range of segment diameters (8‒44 cm) and DBH (15‒45 cm).

Abstract This research attempted to analyze a triple-tube heat exchanger (TTHE) fitted with innovative crimped-spiral ribs to enhance thermal efficiency. The crimped-spiral rib was placed on the top of the internal tube, and the water–alumina nanofluid was employed as the hot fluid within the ribbed side, whereas the two other fluids were pure water. The numerical solutions were performed through the two-phase mixture method, while the turbulent flow was modeled via the Reynolds Stress Model (RSM). The overall heat transfer coefficient (U), heat transfer rate, effectiveness, and performance index enhanced remarkably by using the nanofluid. The greatest increment in the U and effectiveness reached around 44.91 and 41 %, respectively, by the increment of the volume fraction by 0.02. The crimp intensity had an appreciable contribution to the thermal performance. The main mechanism was stronger swirl flow generated by the crimped-spiral rib that yielded boundary layer destruction. The heat transfer capability was increased via the rib pitch decrement and rib height increment. The performance index showed great values even at low volume fractions, which manifested the great merit of the implemented refinements. The thermal attributes were investigated at the first of the result section and then, the hydraulic characteristics were researched.

Energy management is considered the major concern in cloud computing, which supports the rapid growth of data centers and computing centers; therefore, energy and load balancing have become crucial issues in cloud data centers. To address this issue, the present paper proposed a two-phase energy-aware load balancing (EALB) scheduling algorithm using the virtual machine migration through the Particle Swarm Optimization (PSO) algorithm to be applicable to dynamic voltage frequency scaling-enabled cloud data centers, which is called EALBPSO. In the first phase, an objective function was employed to deactivate a large number of physical machines in order to reduce energy consumption. The main idea of the algorithm was to maximize load balancing in the second phase, in which the remaining virtual and physical machines were used as the PSO inputs, and an objective function was also defined to distribute the load appropriately among the physical machines. In addition, a dataset was developed to test different parameters and scenarios with the aim of assessing the effectiveness of the proposed EALBPSO algorithm in comparison with other algorithms already proposed in the literature for similar purposes. The experimental results demonstrated that the proposed algorithm was capable of saving up to 0.896%, 9.716%, and 10.8% energy compared with the MDPSO algorithm, Kumar et al.’s algorithm, and Dahsti and Rahmani algorithm, respectively, and also it showed 5.91%, 16%, and 16.267% improvements for the number of virtual machines migrations, and 3.867%, 8.623%, and 6.953% improvements for the deviation of processors, all compared with their competitors stated above, respectively.

Abstract Concerns about power quality (PQ) in distribution networks have necessitated the use of PQ measuring/monitoring equipment to detect and analyse PQ problems. As the installation of such equipment at all locations is not economically feasible, minimum number and optimum locations of PQ monitors have been sought in recent researches to meet both economical efficiency and monitoring capability. Focusing on voltage sags, this paper attempts to further reduce the number of PQ monitors obtained by optimum allocation approaches while keeping the desired monitoring capability. Growing number of electric equipment with high sensitivity to voltage sags have raised more concerns about financial losses associated with voltage sags in comparison to other PQ problems. Here, a neural estimator placed at a monitored location is proposed to estimate instantaneous voltage-sag waveforms of a non-monitored sensitive load using local measurements. Echo state network (ESN) is used as the voltage-sag waveform estimator (VSWE). Because of increasing penetration of distributed generations (DGs) and their impacts on voltage-sag performance, they are considered to challenge the estimation task. The proposed ESN-based VSWE is examined on the IEEE 37-bus network. Tests for extensive unseen cases with different fault resistances, fault inception-angles, fault locations and fault types under different load demands and network conditions show acceptable high accuracy of estimations during fault and fault clearing sequences. Furthermore, the performance of the VSWE is investigated during transients due to switching capacitors, DGs, loads and lines.

Abstract Gas cyclone separators have been widely used in different industries. In this study, to find the best geometrical ratios of Stairmand cyclone separator, computational fluid dynamics (CFD), design of experiments (DOE), multi-gene genetic programming (MGGP), and ten meta-heuristic algorithms were combined. Six geometrical dimensions of the gas cyclone separator including inlet height and width, vortex finder length and its diameter, cylinder height and cone-tip diameter were optimized. The obtained models from MGGP were optimized by ten meta-heuristic algorithms and non-dominated Pareto fronts were analyzed using six unary and binary metrics and PROMETHEE II as a decision making method. According to the optimization results, multi-objective Particle Swarm Optimization (MOPSO) showed the best performance and generated more preferred designs than Stairmand design compared to other algorithms. These preferred designs increased the collection efficiency within 0.36 to 6% and decreased the pressure drop within 3.3 to 27.5% compared to the Stairmand.

Among various bioreactors examined in anaerobic digestion and dark fermentation, UASB bioreactor has shown to be a promising alternative. However, mass transfer resistance and biomass washout have been the issues that reported as draw backs of the granular system in the literature. Another problem associated with such a system is its long start-up period as a result of biomass washout and long microbial granulation stage. In this paper, the results obtained from an UASFF bioreactor in methane (AD process) and hydrogen (DF process) production from POME, are presented to assess mass transfer of substrate into the granules and also study the role of internal packing used in the middle part of reactor in the process stability. The value of effectiveness factor, η, for AD and DF processes were calculated to be 0.96 and 0.94, respectively, indicating that there was no mass transfer resistance due to internal and/or external factors. The results showed that the packing material could retain biomass in the reactor and had outstanding contribution in the granulation enhancement. Its role as a supplementing treatment stage was more significant at low HRTs and up-flow velocities.

AbstractEfficiency of annular elliptical fin has been studied numerically. It has been shown that constant temperature lines do not preserve their circular shape in fins with high aspect ratio and therefore, the common methods such as equivalent fin area or sector method may not be applicable. For this reason, a new simple correlation has been proposed to approximate annular elliptical fin efficiency and then the fin geometry optimized, to maximize the rate of heat dissipation for a specified fin volume, when there is a space restriction on the fin minor axis. Results have been presented graphically and a correlation has been deduced also.

This paper presents a novel modified interactive honey bee mating optimization (IHBMO) base fuzzy stochastic long-term approach for determining optimum location and size of distributed energy resources (DERs). The Monte Carlo simulation method is used to model the uncertainties associated with long-term load forecasting. A proper combination of several objectives is considered in the objective function. Reduction of loss and power purchased from the electricity market, loss reduction in peak load level and reduction in voltage deviation are considered simultaneously as the objective functions. First, these objectives are fuzzified and designed to be comparable with each other. Then, they are introduced into an IHBMO algorithm in order to obtain the solution which maximizes the value of integrated objective function. The output power of DERs is scheduled for each load level. An enhanced economic model is also proposed to justify investment on DER. An IEEE 30-bus radial distribution test system is used to illustrate the effectiveness of the proposed method.