• Energy Research
• other engineering and technologies close
• IT close
• AE close
• Applied Sciences close

Recycled waste materials obtained from industrial and agricultural processes are becoming promising thermal and acoustic insulating solutions in building applications; their use can play an important role in the environmental impact reduction. The aim of the present paper is the evaluation of the thermal performance of recycled waste panels consisting of cork scraps, rice husk, coffee chaff, and end-life granulated tires, glued in different weight ratios and pressed. Six panels obtained from the mixing of these waste materials were fabricated and analyzed. In particular, the scope is the selection of the best compromise solutions from the thermal and environmental points of view. To this aim, thermal resistances were measured in laboratory and a Life Cycle Assessment (LCA) analysis was carried out for each panel; a cross-comparative examination was performed in order to optimize their properties and find the best panels solutions to be assembled in the future. Life Cycle Analysis was carried out in terms of primary Embodied Energy and Greenhouse Gas Emissions, considering a ‘‘cradle-to-gate” approach. The obtained thermal conductivities varied in the 0.055 to 0.135 W/mK range, in the same order of magnitude of many traditional systems. The best thermal results were obtained for the panels made of granulated cork, rice husk, and coffee chaff in this order. The rubber granulate showed higher values of the thermal conductivity (about 0.15 W/mK); a very interesting combined solution was the panel composed of cork (60%), rice husk (20%), and coffee chaff (20%), with a thermal conductivity of 0.08 W/mK and a Global Warming Potential of only 2.6 kg CO2eq/m2. Considering the Embodied Energy (CED), the best solution is a panel composed of 56% of cork and 44% of coffee chaff (minimum CED and thermal conductivity).

Recycled waste materials obtained from industrial and agricultural processes are becoming promising thermal and acoustic insulating solutions in building applications; their use can play an important role in the environmental impact reduction. The aim of the present paper is the evaluation of the thermal performance of recycled waste panels consisting of cork scraps, rice husk, coffee chaff, and end-life granulated tires, glued in different weight ratios and pressed. Six panels obtained from the mixing of these waste materials were fabricated and analyzed. In particular, the scope is the selection of the best compromise solutions from the thermal and environmental points of view. To this aim, thermal resistances were measured in laboratory and a Life Cycle Assessment (LCA) analysis was carried out for each panel; a cross-comparative examination was performed in order to optimize their properties and find the best panels solutions to be assembled in the future. Life Cycle Analysis was carried out in terms of primary Embodied Energy and Greenhouse Gas Emissions, considering a ‘‘cradle-to-gate” approach. The obtained thermal conductivities varied in the 0.055 to 0.135 W/mK range, in the same order of magnitude of many traditional systems. The best thermal results were obtained for the panels made of granulated cork, rice husk, and coffee chaff in this order. The rubber granulate showed higher values of the thermal conductivity (about 0.15 W/mK); a very interesting combined solution was the panel composed of cork (60%), rice husk (20%), and coffee chaff (20%), with a thermal conductivity of 0.08 W/mK and a Global Warming Potential of only 2.6 kg CO2eq/m2. Considering the Embodied Energy (CED), the best solution is a panel composed of 56% of cork and 44% of coffee chaff (minimum CED and thermal conductivity).

This paper proposes a device of sensing that could be integrated into the instruments of any surgical robot. Despite advances in robot-assisted laparoscopic surgery, the tools currently supplied to surgical robots have limited functions, due to the absence of sensorization. With this motivation, we present a preliminary work based on the design, development, and early stages of experimentation with smart and multifunctional devices of sensing for surgical tools. The proposed device of sensing has a proximity sensor, colorimetric sensor, and BLE connection for different surgical instruments to connect to each other. The proximity feedback allows the surgeon to know the distance of the instrument from a particular tissue, to operate in conditions of greater safety. With the colorimetric feedback, on the other hand, we intend to proceed to the identification of specific tissue areas with characteristics that are not typical of the physiological tissue. The results show that the device is promising and can be further developed for multiple clinical needs in robotic procedures. This system can effectively increase the functionality of surgical instruments by overcoming the sensing limitations introduced by using robots in laparoscopic surgery.

This paper proposes a device of sensing that could be integrated into the instruments of any surgical robot. Despite advances in robot-assisted laparoscopic surgery, the tools currently supplied to surgical robots have limited functions, due to the absence of sensorization. With this motivation, we present a preliminary work based on the design, development, and early stages of experimentation with smart and multifunctional devices of sensing for surgical tools. The proposed device of sensing has a proximity sensor, colorimetric sensor, and BLE connection for different surgical instruments to connect to each other. The proximity feedback allows the surgeon to know the distance of the instrument from a particular tissue, to operate in conditions of greater safety. With the colorimetric feedback, on the other hand, we intend to proceed to the identification of specific tissue areas with characteristics that are not typical of the physiological tissue. The results show that the device is promising and can be further developed for multiple clinical needs in robotic procedures. This system can effectively increase the functionality of surgical instruments by overcoming the sensing limitations introduced by using robots in laparoscopic surgery.

Street lighting characterizes many smart city initiatives around the world. In fact, significant savings can be achieved by not only replacing traditional luminaires with low-power LEDs, but also providing streetlights with smart light controllers and network connectivity, allowing the introduction of a sensible light intensity management and reduction of maintenance costs. Moreover, if designed with a far-looking view, smart lighting infrastructure could also support city-wide Internet of Things services, becoming key enablers of the smart city revolution, also in the 5G perspective. In this paper, we provide a thorough discussion on network architectures and communication technologies that could be adopted for smart public lighting applications, showing their benefits and downsides. Starting with significant activity on research, implementation and in-field testing, we also outline the steps required for the deployment of a smart public lighting infrastructure, each discussed in accordance with the network topology considered. Finally, we introduce some additional services that a smart public lighting infrastructure could support and discuss the benefits that would arise from integration with the upcoming 5G cellular network.

Street lighting characterizes many smart city initiatives around the world. In fact, significant savings can be achieved by not only replacing traditional luminaires with low-power LEDs, but also providing streetlights with smart light controllers and network connectivity, allowing the introduction of a sensible light intensity management and reduction of maintenance costs. Moreover, if designed with a far-looking view, smart lighting infrastructure could also support city-wide Internet of Things services, becoming key enablers of the smart city revolution, also in the 5G perspective. In this paper, we provide a thorough discussion on network architectures and communication technologies that could be adopted for smart public lighting applications, showing their benefits and downsides. Starting with significant activity on research, implementation and in-field testing, we also outline the steps required for the deployment of a smart public lighting infrastructure, each discussed in accordance with the network topology considered. Finally, we introduce some additional services that a smart public lighting infrastructure could support and discuss the benefits that would arise from integration with the upcoming 5G cellular network.

Slope instability phenomena are among the most hazardous natural events affecting our society, and therefore the physical–mechanical behavior of rock masses with reference to these is a relevant topic for engineering geological practice, as it conditions the realization and functionality of structures and infrastructures, as well as the quality of life and economy [...]