• Energy Research
• engineering and technology close
• IT close
• EC close

Abstract In this paper, a general mathematical model for the dynamic simulation of a single-effect LiBr/water absorption chiller is presented. The model is based on mass and energy balances applied to the internal components of the machine, and it accounts for the non-steady behaviour due to thermal and mass storage in the components. The validation of the mathematical model is performed through experimental data collected on a commercial small-capacity water-cooled unit. Due to the peculiar technology adopted in the real chiller, a special effort was made to identify the appropriate values of the main physical parameters. The validation of the model is based on the values of the water temperature at the outlet of the machine, as no measurement inside the machine was possible; anyway, a consistency analysis applied to the internal parameters is also presented. The agreement between experimental and simulated results is very good, both on a daily and on a seasonal basis.

Abstract This work, framed in the IEA SHC Task 51 “Solar Energy in Urban Planning”, presents an illustrative perspective of solar energy in urban planning through the analysis of 34 international case studies conducted in 10 countries. The aim here is to examine challenges, barriers and opportunities for active solar systems and passive solar strategies by taking into consideration interrelated technical and non-technical aspects in ongoing and completed projects. It focuses on exposing potential pitfalls and illustrating lessons learned in case studies divided into three categories: (i) existing urban areas, (ii) new urban areas, and (iii) solar landscapes. The analysis has yielded insights into the solar energy strategy adoption, the evaluation of solar energy production, solar irradiation and daylighting, and the architectural quality, sensitivity and visibility of the solar systems for urban planning. The outcomes have implications to stimulate successful practices in implementing solar strategies in urban planning and facilitating their replicability worldwide by avoiding common mistakes.

Abstract This paper aims to present a feasibility study of the innovative plant for methanol synthesis from carbon dioxide-sequestered by fossil fuel power plant and hydrogen, which is produced by water electrolyzer employing the over-production on the electrical grid. The thermo-economic analysis is performed in the framework of the MefCO2 H2020 EU project and it is referred to the German economic scenario, properly taking into account the real market costs and cost functions for different components of the plant. Three different plant capacities for methanol production (4000 10,000 and 50,000 ton/year) have been investigated, assuming an average cost for electrical energy to feed electrolysers and analyzing the influence of the most significant parameters (oxygen selling option, methanol selling price and electrolysers’ capital cost) on the profitability of the plant. The analysis has been performed in W-ECoMP, software for the thermo-economic analysis and plant optimization developed by the University of Genoa.

Abstract In recent years living walls have increasingly spread, thus becoming a diffuse architectural envelope cladding technology. Consequently, a more precise understanding of their thermal behavior and impact on the building energy balance are needed. One of the most important effects provided by the use of living walls is the shading of the building envelope, with clear benefits during the cooling period. Furthermore, many features characterize the thermal behavior of living walls, namely plant species, leaf area index (LAI), evapotranspiration, emissivity and air cavity type. All these particular characteristics have been accounted in the mathematical model developed in the frame of the presented research, whose aim is to provide a tool for the prediction of the thermal behavior of living walls. Two kinds of living walls, one with grass and closed air cavity and the other one with vertical garden and open air cavity were considered. The results achieved by means of the developed model show a good agreement with the measurements also supported by model efficiency indexes such as Nash–Sutcliffe efficiency index (NSEC). Values of around 0.7 were obtained for the NSEC index for both the investigated living walls.

Recycled waste materials obtained from industrial and agricultural processes are becoming promising thermal and acoustic insulating solutions in building applications; their use can play an important role in the environmental impact reduction. The aim of the present paper is the evaluation of the thermal performance of recycled waste panels consisting of cork scraps, rice husk, coffee chaff, and end-life granulated tires, glued in different weight ratios and pressed. Six panels obtained from the mixing of these waste materials were fabricated and analyzed. In particular, the scope is the selection of the best compromise solutions from the thermal and environmental points of view. To this aim, thermal resistances were measured in laboratory and a Life Cycle Assessment (LCA) analysis was carried out for each panel; a cross-comparative examination was performed in order to optimize their properties and find the best panels solutions to be assembled in the future. Life Cycle Analysis was carried out in terms of primary Embodied Energy and Greenhouse Gas Emissions, considering a ‘‘cradle-to-gate” approach. The obtained thermal conductivities varied in the 0.055 to 0.135 W/mK range, in the same order of magnitude of many traditional systems. The best thermal results were obtained for the panels made of granulated cork, rice husk, and coffee chaff in this order. The rubber granulate showed higher values of the thermal conductivity (about 0.15 W/mK); a very interesting combined solution was the panel composed of cork (60%), rice husk (20%), and coffee chaff (20%), with a thermal conductivity of 0.08 W/mK and a Global Warming Potential of only 2.6 kg CO2eq/m2. Considering the Embodied Energy (CED), the best solution is a panel composed of 56% of cork and 44% of coffee chaff (minimum CED and thermal conductivity).

Abstract This paper presents experimental and numerical investigation of mistuned forced responses of an integrally bladed disk with full set of underplatform dampers (UPDs). This research aims at providing: 1. An experimental benchmark for nonlinear dynamics of a mistuned bladed disks with UPDs. 2. A numerical model that can account for features of a mistuned forced response level. Accordingly, a detailed experimental campaign is conducted on a static test rig called Octopus. This rig is specifically designed to investigate the dynamics of a full-scale integrally bladed disk (blisk) with UPDs in a noncontact manner so that the dynamic response of the system is not modified. The effect of mistuning on experimental forced response levels is assessed and a linearized model is proposed to predict the modulation of frequency response functions (FRFs) due to the frequency splitting. In the development of the model, the mistuning pattern identified from the linear blisk without UPDs is used and it is assumed that adding the dampers does not change the structural mistuning of the blisk. In this study, the fundamental mistuning model identification (FMM ID) was employed to identify the mistuning pattern of the blisk. It is shown that the proposed model successfully predicts the modulation of linear mistuned FRFs. The linearized model is also able to predict the modulation of nonlinear mistuned FRFs in stick condition (when nonlinear friction damping is negligible) with a good accuracy validating this assumption that adding the dampers does not change the mistuning pattern.

This paper presents a one-dimensional finite-volume model of an unglazed photovoltaic/thermal (PVT) solar collector. The unit consists of a conventional solar photovoltaic (PV) collector coupled with a suitable heat exchanger. In particular, the collector includes a roll bond heat exchanger and it is not equipped with back and frame insulation. The system is discretized along the flow direction (longitudinal) of the cogenerative collector. For each finite-volume element of the discretized computational domain, mass and energy balances are implemented. The collector geometry and materials parameters are taken from a commercially available device. An on-field experimental investigation is performed in order to validate the proposed model. The model is used to evaluate both electrical and thermodynamic parameters for each element of the domain and for fixed operating conditions. Finally, a sensitivity analysis is also performed in order to investigate the energetic performance of the cogenerative collector as a function of the main design/environmental parameters.