• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• IT close
• PL close
• AT close

Abstract In recent years living walls have increasingly spread, thus becoming a diffuse architectural envelope cladding technology. Consequently, a more precise understanding of their thermal behavior and impact on the building energy balance are needed. One of the most important effects provided by the use of living walls is the shading of the building envelope, with clear benefits during the cooling period. Furthermore, many features characterize the thermal behavior of living walls, namely plant species, leaf area index (LAI), evapotranspiration, emissivity and air cavity type. All these particular characteristics have been accounted in the mathematical model developed in the frame of the presented research, whose aim is to provide a tool for the prediction of the thermal behavior of living walls. Two kinds of living walls, one with grass and closed air cavity and the other one with vertical garden and open air cavity were considered. The results achieved by means of the developed model show a good agreement with the measurements also supported by model efficiency indexes such as Nash–Sutcliffe efficiency index (NSEC). Values of around 0.7 were obtained for the NSEC index for both the investigated living walls.

For economic reasons, expansions of transmission networks are based on a compromise between capital cost and security of power system operation. At the same time, the power system must withstand typical highly likely contingencies. Various emergency state control systems, also called special protections, prevent emergencies following less likely contingencies. This paper describes overloads emergency state control (OLEC) used for the alleviation of overload in transmission networks near a power plant. Such control uses the functions of automated power reduction of generating units and has been implemented for a large steam power plant. The OLEC presented here uses different methods of generation curtailment for steam generation units. A case study illustrates the efficiency of the proposed control method.

Abstract This paper presents experimental and numerical investigation of mistuned forced responses of an integrally bladed disk with full set of underplatform dampers (UPDs). This research aims at providing: 1. An experimental benchmark for nonlinear dynamics of a mistuned bladed disks with UPDs. 2. A numerical model that can account for features of a mistuned forced response level. Accordingly, a detailed experimental campaign is conducted on a static test rig called Octopus. This rig is specifically designed to investigate the dynamics of a full-scale integrally bladed disk (blisk) with UPDs in a noncontact manner so that the dynamic response of the system is not modified. The effect of mistuning on experimental forced response levels is assessed and a linearized model is proposed to predict the modulation of frequency response functions (FRFs) due to the frequency splitting. In the development of the model, the mistuning pattern identified from the linear blisk without UPDs is used and it is assumed that adding the dampers does not change the structural mistuning of the blisk. In this study, the fundamental mistuning model identification (FMM ID) was employed to identify the mistuning pattern of the blisk. It is shown that the proposed model successfully predicts the modulation of linear mistuned FRFs. The linearized model is also able to predict the modulation of nonlinear mistuned FRFs in stick condition (when nonlinear friction damping is negligible) with a good accuracy validating this assumption that adding the dampers does not change the mistuning pattern.

The paper proposes a critical assessment of municipal solid waste gasification today, starting from basic aspects of the process (process types and steps, operating and performance parameters) and arriving to a comparative analysis of the reactors (fixed bed, fluidized bed, entrained bed, vertical shaft, moving grate furnace, rotary kiln, plasma reactor) as well as of the possible plant configurations (heat gasifier and power gasifier) and the environmental performances of the main commercially available gasifiers for municipal solid wastes. The analysis indicates that gasification is a technically viable option for the solid waste conversion, including residual waste from separate collection of municipal solid waste. It is able to meet existing emission limits and can have a remarkable effect on reduction of landfill disposal option.

Abstract Coal gasification is accompanied with formation of tars that cause equipment problems and have to be removed from the raw gas. Our previous studies proved that nickel supported ceria-zirconia catalyst (Ni/CZ) reveals high activity towards decomposition of toluene and 1-methylnaphthalene (1-MN) via steam reforming reaction (SR). However, the components of the raw gas from coal gasification (i.e. H2, CO, CO2 and CH4) may influence the performance of Ni/CZ catalyst. The influence of particular components of the raw gas on catalyst performance during SR of model tar compounds have been studied and discussed in this paper. It has been found that H2 and CO addition to the steam reforming feed drastically decreases the activity of Ni/CZ catalyst, whereas CO2 presence enhances conversion of toluene and 1-MN mixture owing to the occurrence of dry reforming reaction (DR). It has also been observed that methane, which is present in the raw gas from coal gasification consumes partly both the H2O and CO2, causing some decrease in conversion of model tar compounds. The influence of contact time (tc) on hydrocarbons conversion and the participation of (DR) have been examined. As was observed, lower contact times lead to decrease in hydrocarbons conversion in SR, making the same participation of DR more pronounced than for higher tc values. This work proves that Ni/CZ catalyst can be used for removal of tarry compounds via the catalytic hot gas cleaning of the raw gas form coal gasification.

AbstractThe efficacy of thyroid (FNAB) processed by liquid‐based cytology (LBC) in Hashimoto's Thyroiditis (HT) in two reference periods, is evaluated. The morphologic features of 820 cases with both methods and the cyto‐histological comparison are analyzed. The diagnosis of hyperplastic nodules (HN) in HT, its mimickers especially in presence of oxyphilic cells and the role of immunocytochemistry (IHC) are studied.150 cases of HT processed by conventional smear (CS) in 1996–98 and 670 with LBC in 2005–2007,were included. The majority of FNAB were carried out under USguidance and fixed with ethyl alcohol for the CS. LBC material was rinsed in the Cytolit solution, processed according to the manufacturer's recommendations. Among the 150 CS, 83 were HT while 67 were HN in HT; in the second triennium 245 LBC were HT and 425 were HN in HT. In the first period a follow‐up (including a second FNA or surgery) was done in 92 cases, in the second period in 116.In the surgical group 97.1% in the first period were benign (all HT and 34/36 HN) and 2.8% malignant(all HN). In 2005–2007, 94% were benign (15 HT and 45/49 HN) and 6%malignant. Thirty HN from the second triennium had ICC for HBME‐1 and Galectin‐3 resulting negative in 93.5%. Among these cases, 10 had a benign histology and a concordant negative ICC.LBC can be used as a valid method for HT, especially for the possible application of ICC to HN, and it allows a correct preoperative selection of lesions Diagn. Cytopathol. 2011; © 2011 Wiley‐Liss, Inc.

Efficiency of energy resource use is a key factor for a sustainable energy future. By matching the exergy levels of supply and demand, Energy Quality Management (EQM) of building energy supply systems may achieve more efficient use of energy resources. Beyond this, environmental impact of energy supply systems is another essential issue. This work addresses the influence of EQM on CO 2 emissions in the operation optimization of a Distributed Energy System (DES). A multi-objective linear programming problem is formulated to reduce energy costs and increase the overall exergy efficiency. Total CO 2 emissions are evaluated for the optimized operation strategies of the DES. The operators of the DES can choose the operation strategy from the Pareto front, based on their priorities and also aware of effects on CO 2 emissions. Results demonstrate more efficient use of energy resources and reduction in CO 2 emissions through EQM, as compared with conventional energy supply systems.