• Energy Research
• 2021-2025close
• Closed Access close
• Embargo close
• KR close
• JP close

Abstract The accurate information of the thermal stresses and temperature in isotropic elastic solids is the key for many engineering applications. At present the classical linear coupled theory of thermoelasticity deduced with the assumptions of small temperature changes is widely used to solve the thermoelastic problems in engineering. In this paper, to describe the thermoelastic behavior in isotropic solids undergoing large temperature changes more accurately, the novel coupled models of thermoelasticity and the corresponding finite element models have been presented explicitly and validated by experimental measurement. The effect of large temperature changes on the solutions of thermoelastic problems is discussed. For the heat transfer process, if the isotropic elastic solids will expand when heated and contract when cooled and the condition d E E d T · σ i j E − δ i j 1 − 2 ν α 0 can be met in the context of small deformations, the effect of large temperature changes can be regarded as increasing the specific heat. The proposed models are applied to solve two thermoelastic problems. From the obtained numerical results, the effect of large temperature changes will increase with the amplitude of temperature change and may be considerably even when the temperature changes slowly.

Abstract The accurate information of the thermal stresses and temperature in isotropic elastic solids is the key for many engineering applications. At present the classical linear coupled theory of thermoelasticity deduced with the assumptions of small temperature changes is widely used to solve the thermoelastic problems in engineering. In this paper, to describe the thermoelastic behavior in isotropic solids undergoing large temperature changes more accurately, the novel coupled models of thermoelasticity and the corresponding finite element models have been presented explicitly and validated by experimental measurement. The effect of large temperature changes on the solutions of thermoelastic problems is discussed. For the heat transfer process, if the isotropic elastic solids will expand when heated and contract when cooled and the condition d E E d T · σ i j E − δ i j 1 − 2 ν α 0 can be met in the context of small deformations, the effect of large temperature changes can be regarded as increasing the specific heat. The proposed models are applied to solve two thermoelastic problems. From the obtained numerical results, the effect of large temperature changes will increase with the amplitude of temperature change and may be considerably even when the temperature changes slowly.

Abstract Double and added double stage organic Rankine cycle systems are configured to recover exhaust gas waste heat of dual fuel engines. To evaluate the performance of the models proposed here, energy, exergy and economic analyses are performed. Several working fluids are evaluated for recommendation for double and added double stage organic Rankine cycle systems. In the double stage organic Rankine cycle, cycle 1 and cycle 2 are connected in parallel. Working fluids R123, R141b, and R601 are used in cycle 1, and R245fa, R236ea, and R1233zd in cycle 2. In the double stage organic Rankine cycle, the working fluid combinations of R601-R1233zd, R601-R245fa and R123-R245fa show better performance when considering power, heat transfer area and payback period, which are 1760 kW, 2108.9 m2 and 4.21 year, respectively for R601-R245fa. In the added double stage organic Rankine cycle, cycle 1 and cycle 2 are connected in two stages and cycle 1 and cycle 3 in parallel. The net power of the working fluid combinations of R123-R245fa and R123-R1233zd are 1799 kW and 1782 kW, respectively, which are higher than those of the others. Further, for R123-R245fa, the heat transfer area and payback period are 3352 m2 and 6.20 year, respectively, which is better compared to those of other working fluid combinations.

Abstract Double and added double stage organic Rankine cycle systems are configured to recover exhaust gas waste heat of dual fuel engines. To evaluate the performance of the models proposed here, energy, exergy and economic analyses are performed. Several working fluids are evaluated for recommendation for double and added double stage organic Rankine cycle systems. In the double stage organic Rankine cycle, cycle 1 and cycle 2 are connected in parallel. Working fluids R123, R141b, and R601 are used in cycle 1, and R245fa, R236ea, and R1233zd in cycle 2. In the double stage organic Rankine cycle, the working fluid combinations of R601-R1233zd, R601-R245fa and R123-R245fa show better performance when considering power, heat transfer area and payback period, which are 1760 kW, 2108.9 m2 and 4.21 year, respectively for R601-R245fa. In the added double stage organic Rankine cycle, cycle 1 and cycle 2 are connected in two stages and cycle 1 and cycle 3 in parallel. The net power of the working fluid combinations of R123-R245fa and R123-R1233zd are 1799 kW and 1782 kW, respectively, which are higher than those of the others. Further, for R123-R245fa, the heat transfer area and payback period are 3352 m2 and 6.20 year, respectively, which is better compared to those of other working fluid combinations.

Abstract Date biomass is a carbon-rich renewable resource that can be considered a potential carbon-rich substrate for energy generation over anaerobic digestion (AD). However, due to its complex nature, appropriate pretreatment is necessary to achieve a higher methane yield. Hence, the current study was envisioned to evaluate the influence of three different pretreatment strategies, namely acid, alkali, and hydrothermal pretreatment on biochemical methane potential (BMP) of seven diverse sorts of Algerian date biomass, namely Pedicels, Fibrilium, Petiole, Fruit bunch, Spath, Palm, and its mixture. Among all the pretreatment conditions, alkaline pretreatment highly influenced the lignin composition of date biomass and showed higher BMP. Among all sorts of biomass, higher BMP was detected through Palm as 295.9 mL CH4/g-TS, whereas the lowest BMP values were recorded with Petiole as 226.74 mL CH4/g-TS. Among all the experimental variations, ammonium pretreated Palm biomass documented the highest substrate conversion efficiency (63.80%), which correlates well with the observed higher BMP values. Nevertheless, there was a very marginal improvement in BMP detected in the case of other pretreatment strategies compared to alkaline pretreatment. This might be due to the efficacy of the applied pretreatment method on delignification of date biomass.

Abstract Date biomass is a carbon-rich renewable resource that can be considered a potential carbon-rich substrate for energy generation over anaerobic digestion (AD). However, due to its complex nature, appropriate pretreatment is necessary to achieve a higher methane yield. Hence, the current study was envisioned to evaluate the influence of three different pretreatment strategies, namely acid, alkali, and hydrothermal pretreatment on biochemical methane potential (BMP) of seven diverse sorts of Algerian date biomass, namely Pedicels, Fibrilium, Petiole, Fruit bunch, Spath, Palm, and its mixture. Among all the pretreatment conditions, alkaline pretreatment highly influenced the lignin composition of date biomass and showed higher BMP. Among all sorts of biomass, higher BMP was detected through Palm as 295.9 mL CH4/g-TS, whereas the lowest BMP values were recorded with Petiole as 226.74 mL CH4/g-TS. Among all the experimental variations, ammonium pretreated Palm biomass documented the highest substrate conversion efficiency (63.80%), which correlates well with the observed higher BMP values. Nevertheless, there was a very marginal improvement in BMP detected in the case of other pretreatment strategies compared to alkaline pretreatment. This might be due to the efficacy of the applied pretreatment method on delignification of date biomass.

Abstract Energy harvesting in natural environment has attracted a great deal of attention to generate stable and continuous electrical energy. In this work, we proposed an advanced pyroelectric energy harvesting system by using form-stable phase change material (PCM) composites. The PCM composite connected pyro-electrode generated electrical polarization due to the change of external environment. Polyethylene glycol (PEG) and 1-tetradecanol (1-TD) composites with different phase transition field induced the temperature difference during light-on/-off process. Poly(vinylidene difluoride) (PVDF) was utilized for pyroelectric energy harvesting. The PVDF based pyro-electrode was applied changing the conditions of solar light irradiation and heat air flow. The PCM composites controlled the temperature fluctuation effectively and generated stable output electrical voltage and current. Numerical simulation was carried out to provided in-depth insight into the underlying physics of the system. We envisage that the developed thermal energy harvesting system can pave a way towards high-throughput and sustainable energy harvesting.