• Energy Research
• Open Access close
• Embargo close
• ES close
• EU close
• NL close
• IN close

AbstractDecarbonising the energy system requires high shares of variable renewable generation and sector coupling like power to heat. In addition to heat supply, heat pumps can be used in future energy systems to provide flexibility to the electricity system by using the thermal storage potential of the building stock and buffer tanks to shift electricity demand to hours of high renewable electricity production. Bridging the gap between two methodological approaches, we coupled a detailed building technology operation model and the open-source energy system model Balmorel to evaluate the flexibility potential that decentral heat pumps can provide to the electricity system. Austria in the year 2030 serves as an example of a 100% renewable-based electricity system (at an annual national balance). Results show that system benefits from heat pump flexibility are relatively limited in extent and concentrated on short-term flexibility. Flexible heat pumps reduce system cost, CO2 emissions, and photovoltaics and wind curtailment in all scenarios. The amount of electricity shifted in the assessed standard flexibility scenario is 194 GWhel and accounts for about 20% of the available flexible heat pump electricity demand. A comparison of different modelling approaches and a deterministic sensitivity analysis of key input parameters complement the modelling. The most important input parameters impacting heat pump flexibility are the flexible capacity (determined by installed capacity and share of control), shifting time limitations, and cost assumptions for the flexibility provided. Heat pump flexibility contributes more to increasing low residual loads (up to 22% in the assessed scenarios) than decreasing residual load peaks. Wind power integration benefits more from heat pump flexibility than photovoltaics because of the temporal correlation between heat demand and wind generation.

AbstractDecarbonising the energy system requires high shares of variable renewable generation and sector coupling like power to heat. In addition to heat supply, heat pumps can be used in future energy systems to provide flexibility to the electricity system by using the thermal storage potential of the building stock and buffer tanks to shift electricity demand to hours of high renewable electricity production. Bridging the gap between two methodological approaches, we coupled a detailed building technology operation model and the open-source energy system model Balmorel to evaluate the flexibility potential that decentral heat pumps can provide to the electricity system. Austria in the year 2030 serves as an example of a 100% renewable-based electricity system (at an annual national balance). Results show that system benefits from heat pump flexibility are relatively limited in extent and concentrated on short-term flexibility. Flexible heat pumps reduce system cost, CO2 emissions, and photovoltaics and wind curtailment in all scenarios. The amount of electricity shifted in the assessed standard flexibility scenario is 194 GWhel and accounts for about 20% of the available flexible heat pump electricity demand. A comparison of different modelling approaches and a deterministic sensitivity analysis of key input parameters complement the modelling. The most important input parameters impacting heat pump flexibility are the flexible capacity (determined by installed capacity and share of control), shifting time limitations, and cost assumptions for the flexibility provided. Heat pump flexibility contributes more to increasing low residual loads (up to 22% in the assessed scenarios) than decreasing residual load peaks. Wind power integration benefits more from heat pump flexibility than photovoltaics because of the temporal correlation between heat demand and wind generation.

BackgroundAlcohol abuse is a risk factor for bone damage and fracture‐related complications. Through precise β‐catenin signaling, canonical Wnt signaling plays a key role in fracture repair by promoting the differentiation of new bone and cartilage cells. In this study, we examined the effects of alcohol on the Wnt pathway in injured bone using a murine model of alcohol‐induced impaired fracture healing.MethodsMale C57Bl/6 or T cell factor (TCF)‐transgenic mice were administered 3 daily intraperitoneal doses of alcohol or saline. One hour following the final injection, mice were subjected to a stabilized, mid‐shaft tibial fracture. Injured and contralateral tibias were harvested at 6, 9, or 14 days post‐fracture for the analysis of biomechanical strength, callus tissue composition, and Wnt/β‐catenin signaling.ResultsAcute alcohol treatment was associated with a significant decrease in fracture callus volume, diameter, and biomechanical strength at day 14 post‐fracture. Histology revealed an alcohol‐related reduction in cartilage and bone formation at the fracture site, and that alcohol inhibited normal cartilage maturation. Acute alcohol exposure caused a significant 2.3‐fold increase in total β‐catenin protein at day 6 and a significant decrease of 53 and 56% at days 9 and 14, respectively. lacZ staining in β‐galactosidase‐expressing TCF‐transgenic mice revealed spatial and quantitative differences in Wnt‐specific transcriptional activation at day 6 in the alcohol group. Days 9 and 14 post‐fracture showed that acute alcohol exposure decreased Wnt transcriptional activation, which correlates with the modulation of total β‐catenin protein levels observed at these time points.ConclusionsAcute alcohol exposure resulted in significant impairment of fracture callus tissue formation, perturbation of the key Wnt pathway protein β‐catenin, and disruption of normal Wnt‐mediated transcription. These data suggest that the canonical Wnt pathway is a target for alcohol in bone and may partially explain why impaired fracture healing is observed in alcohol‐abusing individuals.

BackgroundAlcohol abuse is a risk factor for bone damage and fracture‐related complications. Through precise β‐catenin signaling, canonical Wnt signaling plays a key role in fracture repair by promoting the differentiation of new bone and cartilage cells. In this study, we examined the effects of alcohol on the Wnt pathway in injured bone using a murine model of alcohol‐induced impaired fracture healing.MethodsMale C57Bl/6 or T cell factor (TCF)‐transgenic mice were administered 3 daily intraperitoneal doses of alcohol or saline. One hour following the final injection, mice were subjected to a stabilized, mid‐shaft tibial fracture. Injured and contralateral tibias were harvested at 6, 9, or 14 days post‐fracture for the analysis of biomechanical strength, callus tissue composition, and Wnt/β‐catenin signaling.ResultsAcute alcohol treatment was associated with a significant decrease in fracture callus volume, diameter, and biomechanical strength at day 14 post‐fracture. Histology revealed an alcohol‐related reduction in cartilage and bone formation at the fracture site, and that alcohol inhibited normal cartilage maturation. Acute alcohol exposure caused a significant 2.3‐fold increase in total β‐catenin protein at day 6 and a significant decrease of 53 and 56% at days 9 and 14, respectively. lacZ staining in β‐galactosidase‐expressing TCF‐transgenic mice revealed spatial and quantitative differences in Wnt‐specific transcriptional activation at day 6 in the alcohol group. Days 9 and 14 post‐fracture showed that acute alcohol exposure decreased Wnt transcriptional activation, which correlates with the modulation of total β‐catenin protein levels observed at these time points.ConclusionsAcute alcohol exposure resulted in significant impairment of fracture callus tissue formation, perturbation of the key Wnt pathway protein β‐catenin, and disruption of normal Wnt‐mediated transcription. These data suggest that the canonical Wnt pathway is a target for alcohol in bone and may partially explain why impaired fracture healing is observed in alcohol‐abusing individuals.

Drying experiments have been performed with potato cylinders and slices using a laboratory scale designed natural convection mixed-mode solar dryer. The drying data were fitted to eight different mathematical models to predict the drying kinetics, and the validity of these models were evaluated statistically through coefficient of determination (R(2)), root mean square error (RMSE) and reduced chi-square (χ (2)). The present investigation showed that amongst all the mathematical models studied, the Modified Page model was in good agreement with the experimental drying data for both potato cylinders and slices. A mathematical framework has been proposed to estimate the performance of the food dryer in terms of net CO2 emissions mitigation potential along with unit cost of CO2 mitigation arising because of replacement of different fossil fuels by renewable solar energy. For each fossil fuel replaced, the gross annual amount of CO2 as well as net amount of annual CO2 emissions mitigation potential considering CO2 emissions embodied in the manufacture of mixed-mode solar dryer has been estimated. The CO2 mitigation potential and amount of fossil fuels saved while drying potato samples were found to be the maximum for coal followed by light diesel oil and natural gas. It was inferred from the present study that by the year 2020, 23 % of CO2 emissions can be mitigated by the use of mixed-mode solar dryer for drying of agricultural products.

Drying experiments have been performed with potato cylinders and slices using a laboratory scale designed natural convection mixed-mode solar dryer. The drying data were fitted to eight different mathematical models to predict the drying kinetics, and the validity of these models were evaluated statistically through coefficient of determination (R(2)), root mean square error (RMSE) and reduced chi-square (χ (2)). The present investigation showed that amongst all the mathematical models studied, the Modified Page model was in good agreement with the experimental drying data for both potato cylinders and slices. A mathematical framework has been proposed to estimate the performance of the food dryer in terms of net CO2 emissions mitigation potential along with unit cost of CO2 mitigation arising because of replacement of different fossil fuels by renewable solar energy. For each fossil fuel replaced, the gross annual amount of CO2 as well as net amount of annual CO2 emissions mitigation potential considering CO2 emissions embodied in the manufacture of mixed-mode solar dryer has been estimated. The CO2 mitigation potential and amount of fossil fuels saved while drying potato samples were found to be the maximum for coal followed by light diesel oil and natural gas. It was inferred from the present study that by the year 2020, 23 % of CO2 emissions can be mitigated by the use of mixed-mode solar dryer for drying of agricultural products.

This report reflects upon the concept of social innovation and the way it is used in the energy sector. It does so by bringing together theoretical investigations and empirical knowledge. We aim to clarify the concept of social innovation in the energy sector by reviewing the literature and reflecting over a number of social innovation projects in Europe. The analysis of the projects against various contextual factors and their goals reveals the significant potential of social innovation on accelerating the energy transition while tackling societal problems. Energy production, energy efficiency and energy literacy are the main domains to which socially innovative activities contribute the most. High competences of project leadership and management observed though projects are often small in scale and context-dependent. This indicates that successful socially innovative energy initiatives require advanced bottom-up governance structures even if that may imply limitations for scaling up. This setting may complicate top-down support as legal, financial or even cultural policy-making must be tailor-made and reinvent or adjust continuously. Nevertheless, social innovative activities are expected to further proliferate the following years and move towards a sound environmental, cultural, political, economic and social direction, as knowledge creation and diffusion of technological and governance innovations accompanied with policy support are on the rise. JRC.C.7-Knowledge for the Energy Union