• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• US close
• NL close

AbstractThe etching of 1.25×3.5 micron trenches in silicon for use in bipolar device isolation using chemistries based on CC12F2 (freon-12) and 02 has been investigated.It was found that competitive reactions in the trench favor deposition of a Si02-like material on the sidewalls and promote lateral etching of the N+ subcollector under conditions necessary for high selectivity.In addition thermally activated processes were investigated by direct measurement of the sample surface temperature during etching.The temperature threshold for the initiation of subcollector undercut was determined to be 70C and the vertical etch rate exhibited an inverse activation indicating adsorption-limited etching.Results are discussed in the context of a qualitative model, based on the etchant-unsaturate model, which describes the contribution of several phenomena to the trench shape.These include sidewall passivation, species transport, deposition, N+ doping enhancement, Si loading, and ion scattering.

Abstract An ATP-activated transhydrogenase which catalyzes the reduction of TPN + by DPNH has been demonstrated in the microsomal fraction from the endosperm of immature Echinocystis macrocarpa seeds. The activity is specifically dependent on the presence of ATP ( K m of approximately 0.1 m m ) of several nucleotides tested. The reaction is stimulated by MgCl 2 addition up to concentrations of 6 m m . When 10 −2 m EDTA is added to the assay mixture in the absence of added MgCl 2 , a transhydrogenation reaction is observed which no longer shows any dependence on added ATP. A TPN + -dependent ATPase activity can be demonstrated in these preparations, but no fixed stoichiometry between ATP cleavage and TPNH formation could be established. A lag in attaining the maximal rate of transhydrogenation is seen unless the enzyme is preincubated for 10 min with ATP before initiating the reaction. It can further be shown that preincubation of the enzyme with ATP followed by removal of the ATP on a Dowex 1 column produces an enzyme capable of catalyzing the transhydrogenation without the further addition of ATP. 2,4-Dinitrophenol and thyroxin are effective inhibitors of the transhydrogenase and 2,4-dinitrophenol was shown to inhibit the activating effect of ATP during the preincubation period. It is concluded that the role of ATP is in the modification of the enzyme rather than direct participation in the transhydrogenation. The transhydrogenase is inhibited by ADP and AMP. This results in a response of the enzyme to adenylate energy charge in a manner characteristic for regulatory enzymes which participate in ATP-utilizing metabolic sequences.

This paper presents an experimental study of indoor thermal environment near a full-scale glass facade with different types of shading devices under varying climatic conditions in winter. Interior glazing and shading temperature, operative temperature and radiant temperature asymmetry were measured for facade sections with roller shades and venetian blinds at different positions. Interior glass surface temperatures can be high during sunny days with low outdoor temperature. Shading systems significantly improved operative temperature and radiant temperature asymmetry during cold sunny days, depending on their properties and tilt angle. During cloudy days the impact was smaller, however the shading layers could still decrease the amount of heat loss through the facade. A transient building thermal model, which also calculates indoor environmental indices under the presence of solar radiation, was developed and compared with the experimental measurements. Part II of this paper uses this validated model with a transient, two-node thermal comfort model (including transmitted solar radiation) for assessment of indoor environmental conditions with different building envelope and shading properties, facade location and orientation.

The experimental study is conducted to investigate the public opinion on how immigration leads to overpopulation and in turn might damage the sustainable development and environmental protection.

Bioenergy is considered a sustainable substitute to fossil-fuel resources and the development of a prudent combination of renewable and innovative conversion technologies are essential for the valorization and effective conversion of biowaste to value-added commodities. Here, a negative pressure-induced carbonization process was proposed for the valorization of lignin-enriched biowaste precursor to bio-oil and environmental materials (biochar) at various temperatures. The high heating values (HHV) of the as-prepared biochars from the lignin enriched precursor under negative pressure (low-medium vacuum) were within 25.9-31.5 MJ/kg, which matched satisfactorily to the commercial charcoal. Whereas, the bio-oils produced from the lignin enriched precursor under vacuum conditions was a blend of complex aromatic and straight-chain hydro-carbons, including aldehyde, ketone, phenol, and furans, exhibiting ability as potential heating-oil with HHV within 21.2-28.2 MJ/kg. Moreover, the biochars produced under vacuum environments at higher temperature showed greater stability (22.5-35.9%) than those produced under N2 atmosphere.

Abstract As a consequence of deregulation, competition and problems in securing capital outlays for expansion of the infrastructure, modern power systems are operating at ever-smaller capacity and stability margins. Traditional entities involved in securing adequate protection and control for the system may soon become inadequate, and the emergence of the new participants (non-utility generation, transmission and distribution companies) requires coordinated approach and careful coordination of the new operating conditions. The paper reviews the key issues and design considerations for the present and new generation of SPS and emergency control schemes, and evaluates the strategies for their implementation.

Abstract The Liquefied natural gas (LNG) cryogenic submerged pump, the core power equipment for the transportation of liquefied natural gas, is prone to cavitation. However, based on the traditional analysis of the pressure drop, the irreversible loss after cavitation can barely be displayed quantitatively. To solve this problem, an entropy production diagnostic model (EPDM) by the contribution of viscous entropy production (VEP), turbulent entropy production (TEP) and wall entropy production (WEP) for the cavitation flow was established to calculate the energy loss. The cryogenic cavitation model and proposed EPDM were proved to be reliable after comparing results with Hord’s experiment in an ogive and cavitation experiment in a centrifugal pump. Then, by studying the total entropy production, it was found that the EPDM could well predict the occurrence of the critical cavitation and the deterioration of cavitation. When compared with TEP and WEP, the effect of VEP is negligible. As the cavitation area expands from the suction surface of inducer (id) to the first-stage impeller (impA), the cavitation process can be divided into three stages and the total energy loss increases significantly from the first stage to the third one. Through the global distribution of energy loss, it was found that the faster growth of the loss in the second-stage impeller (impB) and the second-stage guide vane (gvB), not in id and impA, contributes more to the energy loss after cavitation. Finally, from the variation of ratio of TEP to WEP, it reveals that cavitation has a greater effect on the WEP rate for the impB, but the turbulent viscous dissipation is still dominant, while the eddy dissipation and resistance loss in gvB with the evolution of cavitation are both crucial.

A procedure for optimizing the sizes of soil heat accumulators is presented together with technical and economic solutions the use of which allows the construction cost of such facilities to be minimized. Calculation examples are given.