• Energy Research
• other engineering and technologies close
• 6. Clean water close
• GB close
• CA close
• PK close

Abstract A new formulation for the evaporation, flashing, condensation processes taking place in the effects of thermal desalination systems which simulates the operation of both forward and parallel/cross configurations is coupled with an exergo-economic model based on the SPECO method. The thermo-economic model uses accurate properties for the seawater, brine, pure water and vapour and is solved with an equation solver which does not require the development of a specific solution algorithm as in most previous studies. This flexible model is used to analyze the influence of the number of effects N and the temperature difference ΔT e between effects on the technical and economic performance of multi-effect desalination systems with ejector vapour compression. In particular, it is shown that the performance calculated by an earlier black-box approach is not attainable by technically and economically realistic systems. It is also shown that for each feed configuration and a given number of effects there exists an optimum value of ΔT e which minimizes the cost of the produced potable water. This last result forms the basis of a procedure that combines black-box results with the optimum value of ΔT e and can be used to select the appropriate system for any specific application.

Sustainability of agro-food supply chains has recently become the subject of greater interest from consumers, firms, governmental organizations and academia as the environment continues to deteriorate. One of the most critical factors influencing the sustainability of an agro-food supply chain is its network design. A particularly challenging aspect in this context is the broad range of influencing indicators associated with the Triple Bottom Line (TBL) of sustainability that need to be considered. However, many of these indicators could not be fully integrated or measured by single-step optimization problems. This paper presents a critical literature review of operational research methods for the design of sustainable supply chains. A novel two-stage hybrid solution methodology is proposed. In the first stage, a partner selection is performed using a hybrid multi criteria decision making based on Analytic Hierarchy Process (AHP) method and the Ordered Weighted Averaging (OWA) aggregation method. The result obtained in the first stage is used in the second stage to develop a multi-objective mathematical model to optimize the design of the supply chain network. This approach allows the simultaneous consideration of all three dimensions of sustainability including carbon footprint, water footprint, number of jobs created and the total cost of the supply chain design. The proposed approach generates a Pareto frontier to aid users in making decisions. Numerical experiments are completed utilizing data from an agro-food company to demonstrate the efficiency and effectiveness of the proposed solution methodology. The analyzes of the numerical results provide important organizational, practical and policy insights on (1) the impact of financial and environmental sustainability on supply chain network design (2) the tradeoff analysis between environmental emission, water footprint, societal implications and associated cost for making informed decision on supply chain investment.

Biomethane production from processed industrial food waste (IFW) in admixture with sewage sludge (primary and waste activated sludge: PS and WAS) was evaluated at a range of C:N ratios using a standard biochemical methane potential (BMP) test. IFW alone had a C:N of 30 whereas for WAS it was 5.4 and thus the C:N ratio of the blends fell in that range. Increasing the IFW content in mix improves the methane potential by increasing both the cumulative biogas production and the rate of methane production. Optimum methane yield 239 mL/g VSremoved occurred at a C:N ratio of 15 which was achieved with a blend containing 11 percent (w/w) IFW. As the fraction of IFW in the blend increased, volatile solids (VS) destruction was increased and this led to a reduction in methane yield and amount of production. The highest destruction of volatile solids of 93 percent was achieved at C:N of 20 followed by C:N 30 and 15. A shortened BMP test is adequate for evaluating optimum admixtures.

Although it is widely assumed that business activity is dependent on flows of ecosystem services (ES), little evidence is available with which to evaluate this contention. To address this knowledge gap, we conducted a questionnaire survey of business dependencies on twenty-six different ES in the English county of Dorset, where the environment supports a significant component of the local economy. Responses were received from 212 businesses across twenty-eight sectors. While virtually all businesses (98%) were familiar with the concept of ES, dependency on ES was highly divided with 50% of businesses surveyed claiming no dependence on any ES flows. The highest businesses dependencies reported in this study were for regulating services with the ES of water quality and waste water treatment being of particular importance to businesses. The results however, advised that greater efforts are needed in highlighting the indirect benefits provided by Dorset’s ecosystems, with eight business sectors (58% of respondents) claiming no or little dependence on supporting and habitat services including the ES of biodiversity, habitats for species and maintenance of genetic diversity. Many businesses also indicated little or no dependence on the globally important ES of pollination and soil condition, which may reflect a lack of awareness of dependencies occurring upstream of their value chains. At the sector level, businesses directly involved in protecting, extracting, or manufacturing raw materials were found to be more dependent on provisioning, regulatory and supporting ES than those operating in the service sector who favored cultural ES. These results highlight the value of assessing business dependencies on ES flows, which could usefully inform environmental management and accounting systems and improve monitoring of business performance, and thereby contribute to achievement of sustainability goals.

This paper describes anaerobic thermophilic sludge digestion (55 °C) in a continuously stirred tank reactor (CSTR) on a pilot-plant scale (150 L). The experimental protocol was defined to examine the effect of the increase in the organic loading rate on the efficiency of the digester and to report on its steady-state performance. The reactor was subjected to a programme of steady-state operation over a range of solids retention times (SRTs) of 75, 40, 27, 20 and 15 days and organic loading rates (OLR) in the range 0.4–2.2 kg VS/(m3 day). The digester was fed with raw sludge (containing approximately 35 kg/m3 volatile solids (VS)) once daily during the 75-day SRT period, twice daily during the 40-day SRT period and three times a day during the 27-, 20- and 15-day SRT periods. The reactor was initially operated with an organic loading rate of 0.4 kg VS/(m3 day) and an SRT of 75 days. The volatile solids removal efficiency in the reactor was found to be 73%, while the volumetric methane production rate produced in the digester reached 0.02 m3/(m3 day). Over a 338-day operating period, an OLR of 2.2 kg VS/(m3 day) was achieved with 49.1% VS removal efficiency in the pilot sludge digester, at which time the volumetric methane production rate content of biogas produced in the digester reached 0.4 m3/(m3 day). The chemical oxygen demand (COD) mass balance obtained indicated that COD used for methane generation increased when the SRT was decreased or when the influent organic loading rate was increased. This implies that the amount of COD used in the anabolism route decreased with SRT due the microbial population becoming adapted to new operational conditions and more COD being used to generate methane.

Abstract Food waste (FW), primary sludge (PS) and waste activated sludge (WAS) were characterized and found to be complementary in the concentrations of carbohydrates, total Kjeldahl nitrogen (TKN), PO4–P and some metal for biological hydrogen production. Moreover, FW was found to have low pH buffering capacity while the values for PS and WAS were relatively higher. An anaerobic toxicity analysis (ATA) derived from a methanogenic ATA protocol showed that these waste materials had no toxicity to hydrogen production. Adding phosphate buffer to the FW significantly improved hydrogen production while initial pH was 7.0. Co-digestion of FW and sewage sludge was studied using a batch respirometric cultivation system. All combinations of the feedstocks (FW+PS, FW+WAS and FW+PS+WAS) showed enhanced hydrogen production potential as compared with the individual wastes. A mixing ratio of 1:1 was found to be the best among the ratios tested for all three co-digestion groups. A hydrogen yield of 112 mL/g volatile solid (VS) added was obtained from a combination of FW, PS and WAS. This yield was equivalent to 250 mL/g VS added if only FW contributed to hydrogen production. The reason for the enhancement of hydrogen production was postulated to be multifold in which the increase in buffer capacity in the co-digestion mixture was verified.

Abstract Algae have been considered as a promising biodiesel feedstock. One of the major factors affecting large-scale algae technology application is poor wintering cultivation performance. In this study, an integrated approach is investigated combining freshwater microalgae Chlorella zofingiensis wintering cultivation in pilot-scale photobioreactors with artificial wastewater treatment. Mixotrophic culture with the addition of acetic acid (pH-regulation group) and autotrophic culture (control group) were designed, and the characteristics of algal growth, lipid and biodiesel production, and nitrogen and phosphate removal were examined. The results showed that, by using acetic acid three times per day to regulate pH at between 6.8 and 7.2, the total nitrogen (TN) and total phosphate (TP) removal could be increased from 45.2% to 73.5% and from 92.2% to 100%, respectively. Higher biomass productivity of 66.94 mg L−1 day−1 with specific growth rate of 0.260 day−1 was achieved in the pH-regulation group. The lipid content was much higher when using acetic acid to regulate pH, and the relative lipid productivity reached 37.48 mg L−1 day−1. The biodiesel yield in the pH-regulated group was 19.44% of dry weight, with 16–18 carbons as the most abundant composition for fatty acid methyl esters. The findings of the study prove that pH adjustment using acetic acid is efficient in cultivating C. zofingiensis in wastewater in winter for biodiesel production and nutrient reduction.

AbstractAgricultural organic wastes (AOW) have the potential to provide bioenergy particularly found in biogas by anaerobic digestion (AD). In this study, the biogas production (BP) of AOW was obtained by batch AD with anaerobic digesters (500 mL) at 35°C incubator. The results showed that BP values in terms of volatile solids (VS) from rice husk, rice straw, flower residues, fruit and vegetable residues, wasted oyster shell residue (WOSR), fishery residues, livestock and poultry manures, livestock and poultry slaughter wastes (LPSW), and eight equally mixed wastes (EEMW) were 84.03, 193.36, 153.32, 76.27, 150.48, 63.26, 169.63, 615.74, and 172.83 mL/g VS, respectively. LPSW showed the highest μm of 16.99 mL/g VS‐d, the highest BP of 615.74 mL/g VS and the highest bioconversion efficiency of 65.98% compared to the other organic wastes. BP from the most AOW in Taiwan by AD was estimated to be 768,567,753 (743,522,223, excluding WOSR) m3/year. The annual BP of 768,567,753 m3/year of the eight total major AOW by AD was lower (∼20.11%) than 961,989,781 m3/year of the EEMW by anaerobic co‐digestion. Result also showed that modified Gompertz equation was suitable to describe BP accumulation and BP rate.