• Energy Research
• engineering and technology close
• 13. Climate action close
• 1. No poverty close
• 3. Good health close
• PK close
• SA close

This study searches the impact of tourism growth on emission pollutants in Cyprus (north), which is a small island in the Mediterranean and has shown significant development in hotel and casino sectors in the last two decades. Results from time-series analyses reveal that an inverted U-shaped EKC hypothesis is confirmed for Cyprus with and without tourism development. Tourism also exerts positively significant and long-term effects on the levels of carbon emissions, revealing that growth in the tourism sector causes degradation in the environment.

Shading the greenhouses is necessary in summer to reduce the solar radiation load. This however generates a considerable amount of thermal radiation heat load that needs to be removed via cooling systems. This study aimed to evaluate the effect of different shading configurations on the solar and thermal radiation in a greenhouse. Nets at four different locations were employed to shade the roof and side-walls of a polycarbonate, mechanically ventilated greenhouse. The spectral radiative properties of all these plastic materials were measured in short and long wave spectrum bands. The net solar and thermal radiations and air temperature were measured outside and inside two identical shaded and unshaded greenhouses. The results showed that external roof-shading is desirable, as it reduced the generated thermal radiation in the greenhouse by 21% and 15% during the day and night time, respectively and reduced the greenhouse air temperature during the day. The internal shading (roof and side walls) is undesirable, since it drastically increased the generated thermal radiation in the greenhouse by 147% and strongly increased the greenhouse air temperature during the day. Shading the side-walls is not recommended because it significantly reduces the transmitted solar radiation in the morning and afternoon (when the outside irradiance is low) and is useless at around noon when the outside irradiance is extremely high.

Room occupancy prediction based on indoor environmental quality may be the breakthrough to ensure energy efficiency and establish an interior ambience tailored to each user. Identifying whether temperature, humidity, lighting, and CO2 levels may be used as efficient predictors of room occupancy accuracy is needed to help designers better utilize the readings and data collected in order to improve interior design, in an effort to better suit users. It also aims to help in energy efficiency and saving in an ever-increasing energy crisis and dangerous levels of climate change. This paper evaluated the accuracy of room occupancy recognition using a dataset with diverse amounts of light, CO2, and humidity. As classification algorithms, K-nearest neighbors (KNN), hybrid Adam optimizer–artificial neural network–back-propagation network (AO–ANN (BP)), and decision trees (DT) were used. Furthermore, this research is based on machine learning interpretability methodologies. Shapley additive explanations (SHAP) improve interpretability by estimating the significance values for each feature for classifiers applied. The results indicate that the KNN performs better than the DT and AO-ANN (BP) classification models have 99.5%. Though the two classifiers are designed to evaluate variations in interpretations, we must ensure that they have accurate detection. The results show that SHAP provides successful implementation following these metrics, with differences detected amongst classifier models that support the assumption that model complexity plays a significant role when predictability is taken into account.

Abstract This study presents and evaluates the feasibility of a novel hybridization of modified Kalina cycle, reverse osmosis desalination, and low-temperature water electrolysis utilizing geothermal energy to yield power, distilled water, and hydrogen, respectively. The scientific impact of the current work has been improved considering the features of Sabalan flash-binary geothermal wells in Iran as a real model through a case study. In addition to designing a novel setup, the smart use of multi-heat recovery technique, modifying the base cycle, and utilizing a part of generated distilled water to produce hydrogen by the electrolyzer are the other structural originalities, distinguishing the current work from the previous studies. The suggested system is scrutinized via a parametric study and optimized based on a genetic algorithm. The parametric study demonstrated that the highest sensitivity of varying the performance criteria of the whole system is attributed to the change in flash tank pressure. Moreover, the multi-objective optimization led to achieving the exergy efficiency and trigeneration gain output ratio as 51.3% and 1.7 for the system, respectively. Furthermore, the system was able to produce 4795 kW of power, 5.3 kg/h of hydrogen, and 19.9 kg/s of distilled water.

Deployment of photovoltaic (PV) systems has recently been encouraged for large-scale and small-scale businesses in order to meet the global green energy targets. However, one of the most significant hurdles that limits the spread of PV applications is the dust accumulated on the PV panels’ surfaces, especially in desert regions. Numerous studies sought the use of cameras, sensors, power datasets, and other detection elements to detect the dust on PV panels; however, these methods pose more maintenance, accuracy, and economic challenges. Therefore, this paper proposes an intelligent system to detect the dust level on the PV panels to optimally operate the attached dust cleaning units (DCUs). Unlike previous strategies, this study utilizes the expanded knowledge and collected data for solar irradiation and PV-generated power, along with the forecasted ambient temperature. An expert artificial intelligence (AI) computational system, adopted with the MATLAB platform, is utilized for a high level of data prediction and processing. The AI was used in this study in order to estimate the unprovided information, emulate the provided measurements, and accommodate more input/output data. The feasibility of the proposed system is investigated using actual field data during all possible weather conditions.

This study aimed to realize Sustainable Development Goals (SDGs), i.e., no poverty, zero hunger, and sustainable cities and communities through the implementation of an intelligent cattle-monitoring system to enhance dairy production. Livestock industries in developing countries lack the technology that can directly impact meat and dairy products, where human resources are a major factor. This study proposed a novel, cost-effective, smart dairy-monitoring system by implementing intelligent wireless sensor nodes, the Internet of Things (IoT), and a Node-Micro controller Unit (Node-MCU). The proposed system comprises three modules, including an intelligent environmental parameter regularization system, a cow collar (equipped with a temperature sensor, a GPS module to locate the animal, and a stethoscope to update the heart rate), and an automatic water-filling unit for drinking water. Furthermore, a novel IoT-based front end has been developed to take data from prescribed modules and maintain a separate database for further analysis. The presented Wireless Sensor Nodes (WSNs) can intelligently determine the case of any instability in environmental parameters. Moreover, the cow collar is designed to obtain precise values of the temperature, heart rate, and accurate location of the animal. Additionally, auto-notification to the concerned party is a valuable addition developed in the cow collar design. It employed a plug-and-play design to provide ease in implementation. Moreover, automation reduces human intervention, hence labor costs are decreased when a farm has hundreds of animals. The proposed system also increases the production of dairy and meat products by improving animal health via the regularization of the environment and automated food and watering. The current study represents a comprehensive comparative analysis of the proposed implementation with the existing systems that validate the novelty of this work. This implementation can be further stretched for other applications, i.e., smart monitoring of zoo animals and poultry.

Closed-loop supply chain networks are gaining research popularity due to environmental, economic and social concerns. Such networks are primarily designed to overcome carbon footprints and to retrieve end of life products from customers. This study considers a multi echelon closed-loop supply chain in the presence of machine disruption. A multi-objective model is presented to optimize the total cost, the total time and emissions in a closed-loop supply chain network. The aim is to analyze the trade-off between the objectives of cost, time, and emissions and how these decisions are impacted by the selection of different available machines. A number of solution approaches are tested on a case study from the tire industry. The results suggest the improved performance of the hybrid heuristic and the importance of controlling disruption in a closed-loop supply chain network. Furthermore, there is a trade-off between the different objective functions which can help the decision maker to choose a particular solution according to the preference of an organization. Finally, conclusion and future research avenues are provided.

Abstract This paper investigates the impact of urbanization on energy consumption by applying the Stochastic Impacts by Regression on Population, Affluence and Technology (STIRPAT) in case of Malaysia. The study covers the time period of 1970Q1–2011Q4. The unit root test and the ARDL bounds testing approach have been applied to examine integrating properties and long run relationship in the presence of structural breaks. Our results validated the existence of cointegration and exposed that urbanization is a major contributor in energy consumption. Affluence raises energy demand. Capital stock boosts energy consumption. Trade openness leads to affluence and hence increases energy consumption. The causality analysis finds that urbanization Granger causes energy consumption. The feedback effect is found between energy consumption and affluence and, energy consumption and capital. The bidirectional causality exists between trade openness and energy consumption.