• Energy Research
• 2021-2025close
• natural sciences close
• PL close
• AT close

Progressive urban density affects city centers especially and results in growing congestion, lack of parking spaces, and increasing environmental costs of transportation, causing increased air pollutant emissions and noise. These phenomena reduce the attractiveness of the city and result in a degradation of the quality of life for its residents. In light of these phenomena, there is a clear need for intelligent management of urban space using new technologies that would be complementary to existing intelligent transportation systems. Expanding information resources obtained from mobile cameras will have a positive impact on increasing the efficiency of transportation management and use of limited space in city centers. It will also have an impact on reducing external transport costs and increasing the quality of logistics services provided in the city. The main aim of the paper is to develop a concept of a transport management system in cities using mobile vision systems mounted on unmanned aerial vehicles. The model will concern the cases of lane occupation by freight vehicles and the analysis of parking spaces in the city in order to improve their management. The results of the developed model will contribute to the automation of the parking space management process and increase the efficiency of the use of city parking space resources.

Energy efficiency is an increasingly important dimension of household appliances, which is why they are labeled to indicate their energy consumption. In 2020, the European Union countries changed the labeling system from the previous system: ranging from A+++ to D, to the new system: ranging from A to G, assuming it would be more transparent for the consumer. The aim of the study was to find out the extent to which consumers are aware of the new labeling system, and the impact that the new labels have (compared to the previous ones) on the perception of household appliances and consumer decision-making. For this purpose, the survey was conducted on a nationwide representative Polish sample (n = 1054). The research was partly experimental, where the same appliances were presented with new and previous energy labels. The results showed that currently most people do not identify the new energy classes. Furthermore, products with the new labels are perceived as being less energy efficient in comparison with products with the previous labels, which shows that there is some confusion among consumers in terms of the new energy efficiency labeling system.

This paper studies the vibrational motion of a dynamical system connected to an electromagnetic device, which is one of the energy harvesting (EH) devices that transform the vibrational motion into electric energy. This system has three degrees-of-freedom (DOF) and consists of two linked parts attached together; one is a nonlinear Duffing oscillator, and the other is a nonlinear damping spring pendulum. The regulating equations of motion (EOM) are achieved utilizing Lagrange’s equations and solved analytically applying the approach of multiple scales (AMS) till the third order of approximation. The accuracy of the attained solutions has been examined by comparing them with the numerical ones of the EOM. The time histories of the solutions and the nonlinear stability analysis of the modulation equations are represented graphically in various plots. The Poincaré maps and phase portraits diagrams displayed the stable behavior of the studied dynamical system. In addition, the different ranges of the stabilities are examined and discussed. In the electromagnetic device, the output power and current time series are depicted as a function of different values of the damping coefficients, excitation amplitudes, and load resistance. It is noted that the output current and power are dropped when the damping coefficient is raised. On the other hand, the increment of the excitation has a positive effect on the electrical generation and produces increment of the output power and current. Furthermore, the output power grows when the total resistance increases to accommodate the applied load. The EH device generates high output current and power at low-frequency values. The significance of this work is limited to the numerous uses of its outcomes in everyday life, such as powering medical devices, serving as a power supply for sensors, and serving as a backup energy source for some electronic devices.

Energy harvesting is a useful technique for various kinds of self-powered electronic devices and systems as well as Internet of Things technology. This study presents a two-degrees-of-freedom (2DOF) electromagnetic energy harvester that can use environment vibration and provide energy for small electronic devices. The proposed harvester consists of a cylindrical tube with two moving magnets suspended by a magnetic spring mechanism and a stationary coil. In order to verify the theoretical model, a prototype electromagnetic harvester was constructed and tested. The influence of key parameters, including excitation acceleration, response to a harmonic frequency sweep, and electromechanical coupling on the generated characteristics of the harvester, was investigated. The experimental and theoretical results showed that the proposed electromagnetic energy harvester was able to increase the resonance bandwidth (60–1200 rad/s) and output power (0.2 W). However, due to strong nonlinearity, an unstable region occurred near the main first resonance, which resulted from the Neimark–Sacker bifurcation.

The occurrence of surface discontinuous deformations in post-mining areas is currently a significant and important problem, due to both the frequency of their occurrence and the threat they pose to public safety. This paper presents the results of research concerning the possibility of sinkhole formation in the areas of abandoned mining excavations. For the purpose of assessing the condition of the rock mass disturbed by the existence of numerous mining excavations, electrical resistivity tomography investigations were carried out for the selected area where mining was undertaken in the past at shallow depths and many underground workings accessing the deposit exist. The sinkhole hazard was also analysed theoretically with a new original model based on the solution of A. Sałustowicz’s pressure arch theory.

Plate fin-tube heat exchangers are widely used in air conditioning and refrigeration systems and other industry fields. Various errors made in the manufacturing process can result in the formation of an air gap between the tube and fin. Several numerical simulations were carried out for a symmetric section of plate fin-tube heat exchanger to study the influence of air gap on heat transfer under periodic flow conditions. Different locations and sizes of an air gap spanning 1/2 circumference of the tube were considered for the range of airflow velocities. Velocity and temperature fields for cases with air gap were compared with ideal thermal contact cases. Blocking of heat flow by the gap leads to the reduction of heat transfer rate. Fin discontinuity in the front of the tube causes the smallest reduction of the heat transfer rate in comparison to the ideal tube-fin contact, especially for thin slits. The rear gap position is the worst in the smallest gap range. Therefore, reversing the flow direction can lead to up to a 15% heat transfer increase, if mainly the rear gaps are present. The introduction of a thin slit in the front of the tube leads to convective heat transfer enhancement, which should be further investigated.

The conversion of chemical energy contained in organic matter into electricity has become an object of interest for many scientists worldwide. This technology is used in microbial fuel cells (MFC). Apart from generating electrical energy, these cells can be used simultaneously for wastewater treatment. Although the technology is constantly being improved, currently functioning microbial fuel cells cannot provide appropriate output parameters to use on an industrial scale. One of the barriers is so-called extracellular electron transfer, which in turn depends on the electrode type used, its material, shape, and size. According to current literature, carbon, graphite, stainless steel, and ceramics are the most frequently used electrode materials. However, more and more often, scientists are turning to other, unusual materials, the production of which uses the newest technologies, and one of them is graphene. This material is modified in different ways and connected with other materials, and the results of this seem to be very promising. Scientists manage to get a higher level of extracellular electron transfer and, hence, higher output parameters of the whole system. This article describes chosen technologies and attempts made by scientists worldwide to use graphene in MFC and their results.

Construction of the Włocławek Barrage on the Vistula River in 1970 became an important source of energy; however, it discontinued sediment transport in the Vistula River. This phenomenon resulted in accumulation before and erosion below the barrage; a similar problem can be expected due to the planned construction of the Lower Vistula Cascade. This study is dedicated to finding an effective and feasible solution to sediment transport management, acceptable to a wide group of users (e.g., navigation, energy producers, and ecologists). A numerical 1D model was applied to carry out analysis of hydrodynamics and sediment transport in the river section from Włocławek Barrage to the Vistula River mouth in the Baltic Sea. For calibration, historical data describing the accumulation and erosion created by the Włocławek Barrage were used. The proposed model allowed incorporation of new barrages chronologically, in accordance with the proposed time schedules. Analysis was carried out in a 50-year horizon, using a set of historical flow data. For sediment flushing, it was proposed to use natural flooding events exceeding Q10% discharge and to control sediment management of the adjacent barrages. To use this method in practice requires verification.