• Energy Research
• Restricted close
• Embargo close
• 13. Climate action close
• 6. Clean water close
• FR close
• PL close

Abstract With drastic fossil fuel depletion and environmental deterioration concerns, a move towards a more sustainable bioenergy-based economy is essential. Lately, the application of microwave (MW) irradiation for waste processing has been attracting interest globally. MW-assisted heating possesses several advantages such as the provision of high microwave energy into dielectric materials with deeper penetration for internal heat generation, showing beneficial features in improving the heating rate and reducing the reaction time. Consequently, the most recent literature regarding the applications of MW-assisted heating for biomass pretreatment as well as biofuel and bioenergy production was reviewed and consolidated in this study. An impressive increase in the product yield and improvement of the product properties are reported, with the use of MW-assisted heating in several conversion routes to produce biofuels. Despite being a promising technology for biofuel production, some major fundamental data of MW-assisted heating have not been comprehensively identified. Therefore, the feasibility of this technology for large-scale implementation is still subpar. Understanding the interaction between the feedstock and the microwave electromagnetic field, and the optimization of several operational and mechanical parameters are the two main keystones that would propel the industrialization of MW heating in the near future. This provides key insights leading to increased feasibility and more advanced application of MW heating.

Climaps.eu is an online atlas providing data, visualizations and commentaries about climate adaptation debate. It contains 33 issue-maps and 5 issue-stories. Each of the maps focuses on one issue in the adaptation debate and provides.The atlas is addressed to climate experts (negotiators, NGOs and companies concerned by global warming, journalists…) and to citizens willing to engage with the issues of climate adaptation.It employs advanced digital methods to deploy the complexity of the issues related to climate adaptation and information design to make this complexity legible.

Ostrava in the Moravian-Silesian region (Czech Republic) is a European air pollution hot spot for airborne particulate matter (PM), polycyclic aromatic hydrocarbons (PAHs), and ultrafine particles (UFPs). Air pollution source apportionment is essential for implementation of successful abatement strategies. UFPs or nanoparticles of diameter <100 nm exhibit the highest deposition efficiency in human lungs. To permit apportionment of PM sources at the hot-spot including nanoparticles, Positive Matrix Factorization (PMF) was applied to highly time resolved particle number size distributions (NSD, 14 nm-10 μm) and PM0.09-1.15 chemical composition. Diurnal patterns, meteorological variables, gaseous pollutants, organic markers, and associations between the NSD factors and chemical composition factors were used to identify the pollution sources. The PMF on the NSD reveals two factors in the ultrafine size range: industrial UFPs (28%, number mode diameter - NMD 45 nm), industrial/fresh road traffic nanoparticles (26%, NMD 26 nm); three factors in the accumulation size range: urban background (24%, NMD 93 nm), coal burning (14%, volume mode diameter - VMD 0.5 μm), regional pollution (3%, VMD 0.8 μm) and one factor in the coarse size range: industrial coarse particles/road dust (2%, VMD 5 μm). The PMF analysis of PM0.09-1.15 revealed four factors: SIA/CC/BB (52%), road dust (18%), sinter/steel (16%), iron production (16%). The factors in the ultrafine size range resolved with NSD have a positive correlation with sinter/steel production and iron production factors resolved with chemical composition. Coal combustion factor resolved with NSD has moderate correlation with SIA/CC/BB factor. The organic markers homohopanes correlate with coal combustion and the levoglucosan correlates with urban background. The PMF applications to NSD and chemical composition datasets are complementary. PAHs in PM1 were found to be associated with coal combustion factor.

When biomass is thermally treated, the enrichment of carbon in the remaining “green coal” is correlated with the temperature and duration. Other properties related to the energetic properties of the torrefied biomass are closely related to chemical modifications and correlated to the material mass loss occurring during the thermal degradation. The possibility of using near infrared spectrometry has been investigated to predict the mass loss of Pinus sylvestris wood torrefied at temperatures ranging from 220°C to 300°C with durations varying from 1 minute to 10 hours. A first mass loss prediction model (NIR‐260) associated with the mean torrefaction temperature of 260°C was developed, and appeared suitable only for this temperature due to specific chemical reactions rate. A second model (NIRS‐All), using all available data was constructed and showed an accurate mass loss prediction, for both low (220°C) and high temperatures (300°C). The main differences between NIRS‐260 and NIRS‐All models are mainly attributed to the thermal modification of hemicelluloses and cellulose fractions occurred during the wood torrefaction. The results showed near infrared spectrometry combined with multivariate calibration modeling have potential utility in an industrial context as a standardized continuous method to figure out the mass loss of biomass during torrefaction by a rapid characterization. Novelty Statement The novelty concerns the use of the Near Infrared Spectrometry (NIRS) combined with multivariate calibration modeling as a standardized method for determining the mass loss biomass during torrefaction by a rapid and nondestructive characterization. A model was constructed and showed an accurate mass loss prediction, for both low (220°C) and high temperatures (300°C). Near infrared spectrometry have potential utility in an industrial context as a standardized continuous method.

Abstract The concept of Zero Energy Building (ZEB) has gained wide international attention during last few years and is now seen as the future target for the design of buildings. However, before being fully implemented in the national building codes and international standards, the ZEB concept requires clear and consistent definition and a commonly agreed energy calculation methodology. The most important issues that should be given special attention before developing a new ZEB definition are: (1) the metric of the balance, (2) the balancing period, (3) the type of energy use included in the balance, (4) the type of energy balance, (5) the accepted renewable energy supply options, (6) the connection to the energy infrastructure and (7) the requirements for the energy efficiency, the indoor climate and in case of gird connected ZEB for the building–grid interaction. This paper focuses on the review of the most of the existing ZEB definitions and the various approaches towards possible ZEB calculation methodologies. It presents and discusses possible answers to the abovementioned issues in order to facilitate the development of a consistent ZEB definition and a robust energy calculation methodology.

AbstractBluetongue (BT) is a commonly cited example of a disease with a distribution believed to have recently expanded in response to global warming. The BT virus is transmitted to ruminants by biting midges of the genus Culicoides, and it has been hypothesized that the emergence of BT in Mediterranean Europe during the last two decades is a consequence of the recent colonization of the region by Culicoides imicola and linked to climate change. To better understand the mechanism responsible for the northward spread of BT, we tested the hypothesis of a recent colonization of Italy by C. imicola, by obtaining samples from more than 60 localities across Italy, Corsica, Southern France, and Northern Africa (the hypothesized source point for the recent invasion of C. imicola), and by genotyping them with 10 newly identified microsatellite loci. The patterns of genetic variation within and among the sampled populations were characterized and used in a rigorous approximate Bayesian computation framework to compare three competing historical hypotheses related to the arrival and establishment of C. imicola in Italy. The hypothesis of an ancient presence of the insect vector was strongly favoured by this analysis, with an associated P ≥ 99%, suggesting that causes other than the northward range expansion of C. imicola may have supported the emergence of BT in southern Europe. Overall, this study illustrates the potential of molecular genetic markers for exploring the assumed link between climate change and the spread of diseases.

Research addressing non-food biomass production from the perspective of land-use change and environmental impacts has expanded considerably since 2008. An exhaustive literature review followed by the identification within the resulting corpus of all references seelcing to quantify the consumption of nonrenewable resources yielded 29 articles, which were then examined in detail. Our goal was to describe, as precisely as possible, the methods and results of published research addressing land use change as it relates to the consumption of nonrenewable resources. We found that these articles were in fact more focused on the assessment of other environmental impacts, primarily greenhouse gas impacts, with fossil-fuel use appearing as a collateral result. All the articles employed a life cycle analysis approach; all considered the question of fossil-fuel consumption; and all concluded that a reduction in fossil fuel use was achieved through the substitution of biomass energy. According to the findings of this sub-corpus, biofuels produced from lignocellulosic biomass appear to be most effective in terms of reducing environmental impacts, but few direct comparisons with first-generation biofuels have been made. In general, differences in methodologies and in the assumptions adopted for different studies, particularly with respect to land-use change parameters, make comparisons among the selected studies difficult.

The energy crop sweet sorghum (Sorghum bicolor L. Moench) is raising considerable interest as a source of either fermentable free sugars or lignocellulosic feedstock with the potential to produce fuel, food, feed and a variety of other products. Sweet sorghum is a C4 plant with many potential advantages, including high water, nitrogen and radiation use efficiency, broad agro-ecological adaptation as well as a rich genetic diversity for useful traits. For developing countries sweet sorghum provides opportunities for the simultaneous production of food and bioenergy (e.g. bio-ethanol), thereby contributing to improved food security as well as increased access to affordable and renewable energy sources. In temperate regions (e.g. in Europe) sweet sorghum is seen as promising crop for the production of raw material for 2nd generation bio-ethanol. The project SWEETFUEL (Sweet Sorghum: An alternative energy crop) is supported by the European Commission in the 7th Framework Programme to exploit the advantages of sweet sorghum as potential energy crop for bio-ethanol production. Thereby, the main objective of SWEETFUEL is to optimize yields in temperate and semi-arid regions by genetic enhancement and the improvement of cultural and harvest practices. Proceedings of the 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France, pp. 200-206