• Energy Research
• 13. Climate action close
• IT close
• GB close
• PL close
• Sapienza University of Rome close

Bromine and chlorine are almost ubiquitous in waste of electrical and electronic equipment (WEEE) and the knowledge of their content in the plastic fraction is an essential step for proper end of life management. The aim of this study is to compare the following analytical methods: energy dispersive X-ray fluorescence spectroscopy (ED-XRF), ion chromatography (IC), ion-selective electrodes (ISEs), and elemental analysis for the quantitative determination of chlorine and bromine in four real samples taken from different WEEE treatment plants, identifying the best analytical technique for waste management workers. Home-made plastic standard materials with known concentrations of chlorine or bromine have been used for calibration of ED-XRF and to test the techniques before the sample analysis. Results showed that IC and ISEs, based upon dissolution of the products of the sample combustion, have not always achieved a quantitative absorption of the analytes in the basic solutions and that bromine could be underestimated since several oxidation states occur after combustion. Elemental analysis designed for chlorine determination is subjected to strong interference from bromine and required frequent regeneration and recalibration of the measurement cell. The most reliable method seemed to be the non-destructive ED-XRF. Calibration with home-made standards, having a similar plastic matrix of the samples, enabled us to carry out quantitative determinations, which have been revealed to be satisfactorily accurate and precise. In all the analyzed samples a total concentration of chlorine and/or bromine between 0.6 and 4 w/w% was detected, compromising the feasibility of a mechanical recycling and suggesting the exploration of an alternative route for managing these plastic wastes.

Bromine and chlorine are almost ubiquitous in waste of electrical and electronic equipment (WEEE) and the knowledge of their content in the plastic fraction is an essential step for proper end of life management. The aim of this study is to compare the following analytical methods: energy dispersive X-ray fluorescence spectroscopy (ED-XRF), ion chromatography (IC), ion-selective electrodes (ISEs), and elemental analysis for the quantitative determination of chlorine and bromine in four real samples taken from different WEEE treatment plants, identifying the best analytical technique for waste management workers. Home-made plastic standard materials with known concentrations of chlorine or bromine have been used for calibration of ED-XRF and to test the techniques before the sample analysis. Results showed that IC and ISEs, based upon dissolution of the products of the sample combustion, have not always achieved a quantitative absorption of the analytes in the basic solutions and that bromine could be underestimated since several oxidation states occur after combustion. Elemental analysis designed for chlorine determination is subjected to strong interference from bromine and required frequent regeneration and recalibration of the measurement cell. The most reliable method seemed to be the non-destructive ED-XRF. Calibration with home-made standards, having a similar plastic matrix of the samples, enabled us to carry out quantitative determinations, which have been revealed to be satisfactorily accurate and precise. In all the analyzed samples a total concentration of chlorine and/or bromine between 0.6 and 4 w/w% was detected, compromising the feasibility of a mechanical recycling and suggesting the exploration of an alternative route for managing these plastic wastes.

The joint impact of human activities and climate change on natural resources lead to biodiversity loss. Therefore, it is important to select protected areas through systematic conservation planning. The present study assessed how representative natural habitats are protected under the nature conservation network, and to identify new—but so far insufficiently—protected areas containing these habitats for sustainable management. We used the Marxan model to select the most valuable insufficiently protected natural habitats in the Czech Republic as a representative example for a conservation strategy for Central–Eastern European environments. We set three conservation targets (25%, 50%, and 75%), defining how much percent area of valuable representative natural habitats should be added to the area of the habitats already included in the Nature Protection Network. To implement these conservation targets it is necessary to preserve 22,932 ha, 72,429, ha and 124,363 ha respectively of the conservation targets occurring in the insufficiently protected areas, and 17,255 ha, 51,620 ha, and 84,993 ha respectively of the conservation features in the areas without protection status. Marxan was revealed to be an appropriate tool to select the most valuable and insufficiently protected natural habitats for sustainable management.

The joint impact of human activities and climate change on natural resources lead to biodiversity loss. Therefore, it is important to select protected areas through systematic conservation planning. The present study assessed how representative natural habitats are protected under the nature conservation network, and to identify new—but so far insufficiently—protected areas containing these habitats for sustainable management. We used the Marxan model to select the most valuable insufficiently protected natural habitats in the Czech Republic as a representative example for a conservation strategy for Central–Eastern European environments. We set three conservation targets (25%, 50%, and 75%), defining how much percent area of valuable representative natural habitats should be added to the area of the habitats already included in the Nature Protection Network. To implement these conservation targets it is necessary to preserve 22,932 ha, 72,429, ha and 124,363 ha respectively of the conservation targets occurring in the insufficiently protected areas, and 17,255 ha, 51,620 ha, and 84,993 ha respectively of the conservation features in the areas without protection status. Marxan was revealed to be an appropriate tool to select the most valuable and insufficiently protected natural habitats for sustainable management.

Abstract The field of energy harvesting holds the promise of making our buildings “smart” if effective energy sources can be developed for use in ambient indoor conditions. Photovoltaics (PV), especially in its thin flexible form for easy integration, become a prime candidate for the aim, if tailored for low-density artificial light. We designed a test system which enabled us to measure the performance of PV devices under compact fluorescent lamp (CFL) and light-emitting diode (LED) illumination at different illuminance levels and compared polycrystalline and amorphous silicon cells with our own flexible dye solar cells (DSCs). Whereas poly-Si cells, with 15% outdoor efficiency, delivered at 200 lux under CFL only 2.8 μW/cm2 power density (and an efficiency of 4.4%), a-Si specifically designed for indoors, gave 5.9 μW/cm2 and 9.2% efficiency under the same CFL conditions (and 7.5% efficiency under LED). However, we show that the customization of flexible DSCs, by simply formulating ad-hoc less-concentrated, more transparent electrolytes, enabled these devices to outperform all others, providing average power densities of 8.0 μW/cm2 and 12.4% efficiencies under 200 lux CFL (more than quadruple compared to those measured at 1 sun), and 6.6 μW/cm2 and 10% efficiency under 200 lux LED illumination.

Abstract The field of energy harvesting holds the promise of making our buildings “smart” if effective energy sources can be developed for use in ambient indoor conditions. Photovoltaics (PV), especially in its thin flexible form for easy integration, become a prime candidate for the aim, if tailored for low-density artificial light. We designed a test system which enabled us to measure the performance of PV devices under compact fluorescent lamp (CFL) and light-emitting diode (LED) illumination at different illuminance levels and compared polycrystalline and amorphous silicon cells with our own flexible dye solar cells (DSCs). Whereas poly-Si cells, with 15% outdoor efficiency, delivered at 200 lux under CFL only 2.8 μW/cm2 power density (and an efficiency of 4.4%), a-Si specifically designed for indoors, gave 5.9 μW/cm2 and 9.2% efficiency under the same CFL conditions (and 7.5% efficiency under LED). However, we show that the customization of flexible DSCs, by simply formulating ad-hoc less-concentrated, more transparent electrolytes, enabled these devices to outperform all others, providing average power densities of 8.0 μW/cm2 and 12.4% efficiencies under 200 lux CFL (more than quadruple compared to those measured at 1 sun), and 6.6 μW/cm2 and 10% efficiency under 200 lux LED illumination.

Open spaces (OSs), such as streets, squares, and green areas, in existing built environments (BEs) are key places in disaster risk management. The seismic risk in the OSs is strictly related to BE characteristics. Scientific literature mainly focuses on extrinsic factors affecting risk, which are related to BE elements on the OSs frontier (e.g., buildings) that could cause indirect effects on the OSs. Conversely, just a few risk assessment studies consider intrinsic factors, which are related to OS elements that could suffer direct effects. Moreover, synoptic studies on such factors are still missing. Through literature-based research, the paper identifies specific factors influencing seismic risk in the OSs, focusing notably on intrinsic vulnerability. The literature review methodology includes both a systematic review from Scopus databases and a traditional bibliographic search using snowball analysis. According to the final selected papers, risk factors are classified into five categories of OS characteristics: morpho-typology; physical; construction; use and users; and context. Statistical analysis of the categories’ recurrence in the final papers firstly allows current literature gaps to be defined. The results also provide a preliminary OSs risk index weighting each category in terms of such recurrences, thus representing a first useful step to support non-expert stakeholders in a preliminary assessment of priorities to define the seismic risk of Oss.