• Energy Research
• Open Access close
• Closed Access close
• Open Source close
• PL close
• Polish Academy of Learning close

Abstract Floods are challenging the resilience of societies all over the world. In many countries there are discussions on diversifying the strategies for flood risk management, which implies some sort of policy change. To understand the possibilities of such change, a thorough understanding of the forces of stability and change of underlying governance arrangements is required. It follows from the path dependency literature that countries which rely strongly on flood infrastructures, as part of flood defense strategies, would be more path dependent. Consequently there is a higher chance to find more incremental change in these countries than in countries that have a more diversified set of strategies. However, comparative and detailed empirical studies that may help scrutinize this assumption are lacking. To address this knowledge gap, this paper investigates how six European countries (Belgium, England, France, The Netherlands, Poland and Sweden) essentially differ with regard to their governance of flood risks. To analyze stability and change, we focus on how countries are responding to certain societal and ecological driving forces (ecological turn; climate change discourses; European policies; and the increasing prevalence of economic rationalizations) that potentially affect the institutional arrangements for flood risk governance. Taking both the variety of flood risk governance in countries and their responses to driving forces into account, we can clarify the conditions of stability or change of flood risk governance arrangements more generally. The analysis shows that the national-level impact of driving forces is strongly influenced by the flood risk governance arrangements in the six countries. Path dependencies are indeed visible in countries with high investments in flood infrastructure accompanied by strongly institutionalized governance arrangements (Poland, the Netherlands) but not only there. Also more diversified countries that are less dependent on flood infrastructure and flood defense only (England) show path dependencies and mostly incremental change. More substantial changes are visible in countries that show moderate diversification of strategies (Belgium, France) or countries that ‘have no strong path yet’ in comprehensive flood risk governance (Sweden). This suggests that policy change can be expected when there is both the internal need and will to change and a barrage of (external) driving forces pushing for change.

The assessment of greenhouse gases (GHGs) and air pollutants emitted to and removed from the atmosphere ranks high on international political and scientific agendas. Growing international concern and cooperation regarding the climate change problem have increased the need to consider the uncertainty in inventories of GHG emissions. The approaches to address uncertainty discussed in this special issue reflect attempts to improve national inventories, not only for their own sake but also from a wider, system analytic perspective. They seek to strengthen the usefulness of national emission inventories under a compliance and/or global monitoring and reporting framework. The papers in this special issue demonstrate the benefits of including inventory uncertainty in policy analyses. The issues raised by the authors and featured in their papers, along with the role that uncertainty analysis plays in many of their arguments, highlight the challenges and the importance of dealing with uncertainty. While the Intergovernmental Panel on Climate Change (IPCC) clearly stresses the value of conducting uncertainty analyses and offers guidance on executing them, the arguments made here in favor of performing these studies go well beyond any suggestions made by the IPCC to date. Improving and conducting uncertainty analyses are needed to develop a clear understanding and informed policy. Uncertainty matters and is key to many issues related to inventorying and reducing emissions. Considering uncertainty helps to avoid situations that can create a false sense of certainty or lead to invalid views of subsystems. Dealing proactively with uncertainty allows for the generation of useful knowledge that the international community should have to hand while strengthening the 2015 Paris Agreement, which had been agreed at the 21st Conference of the Parties to the United Nations Framework Convention on Climate Change (UNFCCC). However, considering uncertainty does not come free. Proper treatment of uncertainty is demanding because it forces us to take the step from “simple to complex” and to grasp a holistic system view. Only, thereafter, can we consider potential simplifications. That is, comprehensive treatment of uncertainty does not necessarily offer quick or easy solutions for policymakers. This special issue brings together 13 papers that resulted from the 2015 (4th) International Workshop on Uncertainty in Atmospheric Emissions, in Cracow, Poland. While they deal with many different aspects of the uncertainty in emission estimates, they are guided by the same principal question: “What GHGs shall be verified at what spatio-temporal scale to support conducive legislation at local and national scales, while ensuring effective governance at the global scale?” This question is at the heart of mitigation and adaptation. It requires an understanding of the entire system of GHG sources and sinks, their spatial characteristics and the temporal scales at which they react and interact, the uncertainty (accuracy and/or precision) with which fluxes can be measured, and last but not least, the consequences that follow from all of the aforementioned aspects, for policy actors to frame compliance and/or global monitoring and reporting agreements. This bigger system context serves as a reference for the papers in the special issue, irrespective of their spatio-temporal focus, and is used as a guide for the reader.

Abstract The direct carbon fuel cells with solid oxide electrolyte (DC-SOFC) and anodes deposited by inject printing (EM/DCIJP) were studied. The cells were fed with carbon fuel obtained by the direct RF plasma splitting of methane. Since the (EM/DCIJP)M/DCIJP technology allows easy modification of electrode material, the effect of Cu addition to the Ni–YSZ anode was investigated. The significant improvement of the cell performance with the new anode was observed.

The study of the biological mechanisms of ethanol reward has greatly suffered from problems to obtain ethanol-induced conditioned place preference (CPP) in rats. In the present study, CPP was obtained in genetically selected Marchigian Sardinian alcohol-preferring (msP) rats, derived from Sardinian alcohol-preferring rats, following intragastric (IG) ethanol administration by means of a permanent IG catheter, but not after intraperitoneal (IP) injection or IG gavage. Rats with permanent IG catheter, received IG administration of 0.35, 0.7, 1.5 or 2.8 g/kg ethanol, as a 10% v/v solution. In ethanol-experienced rats 0.7 or 1.5, but not 0.35 or 2.8 g/kg ethanol significantly increased in comparison to controls the time spent in the ethanol-associated previously non-preferred compartment, which became preferred in the post-conditioning test. In ethanol-naive rats, only 0.7 g/kg ethanol significantly increased the time spent in the ethanol-associated compartment. On the other hand, no effect was observed in alcohol-experienced rats following IG gavage, or IP injection of 0.35, 0.7 or 1.5 g/kg ethanol. The present results provide evidence that ethanol possesses postingestive rewarding properties in msP rats, and that it can reliably induce CPP in them, provided that an appropriate method of administration is adopted.

Abstract Currently, the first generation of silicon solar cells is dominating the photovoltaic market. Silicon cells are produced by various methods, which employ either crystalline or multi-crystalline substrates. However, both these manufacturing processes are expensive and potentially harmful to the environment and health. One example of this is that the surface is given its texture in a highly corrosive water solution of nitric and hydrofluoric acid. Additionally, both the diffusion and manufacturing of p-n junction and of metal contacts are associated with very high temperatures. This prompted us in our search for cheaper and more environmental friendly technologies. In this work, we discuss the possibility of producing components of photovoltaic cells by employing atomic layer deposition and hydrothermal technologies. This does not require the use of hazardous chemicals and high temperatures. The maximum efficiency of zinc oxide/silicon solar cells is 14% and 10% for textured and planar structures, respectively. A environmentally-friendly and simple procedure is thus being proposed, which, together with its relative efficiency, makes it an attractive alternative to the present procedure.

The article presents results of thermodynamic analysis using a zero-dimensional mathematical models of a negative CO2 emission power plant. The developed cycle of a negative CO2 emission power plant allows the production of electricity using gasified sewage sludge as a main fuel. The negative emission can be achieved by the use this type of fuel which is already a “zero-emissive” energy source. Together with carbon capture installation, there is a possibility to decrease CO2 emission below the “zero” level. Developed models of a novel gas cycle which use selected codes allow the prediction of basic parameters of thermodynamic cycles such as output power, efficiency, combustion composition, exhaust temperature, etc. The paper presents results of thermodynamic analysis of two novel cycles, called PDF0 and PFD1, by using different thermodynamic codes. A comparison of results obtained by three different codes offered the chance to verify results because the experimental data are currently not available. The comparison of predictions between three different software in the literature is something new, according to studies made by authors. For gross efficiency (54.74%, 55.18%, and 52.00%), there is a similar relationship for turbine power output (155.9 kW, 157.19 kW, and 148.16 kW). Additionally, the chemical energy rate of the fuel is taken into account, which ultimately results in higher efficiencies for flue gases with increased steam production. A similar trend is assessed for increased CO2 in the flue gas. The developed precise models are particularly important for a carbon capture and storage (CCS) energy system, where relatively new devices mutually cooperate and their thermodynamic parameters affect those devices. Proposed software employs extended a gas–steam turbine cycle to determine the effect of cycle into environment. First of all, it should be stated that there is a slight influence of the software used on the results obtained, but the basic tendencies are the same, which makes it possible to analyze various types of thermodynamic cycles. Secondly, the possibility of a negative CO2 emission power plant and the positive environmental impact of the proposed solution has been demonstrated, which is also a novelty in the area of thermodynamic cycles.

This paper is focused on the energy performance of buildings containing massive exterior building envelope components. The effect of mass and insulation location on heating and cooling loads is analyzed for six characteristic wall configurations. Correlations between structural and dynamic thermal characteristics of walls are discussed. A simple one-room model of a building exposed to periodic temperature changes is analyzed to illustrate the effect of material configuration on the ability of a wall to dampen interior temperature swings. Whole-building dynamic modeling using DOE-2.1E is employed for the energy analysis of a one-story residential building with various exterior wall configurations for six different US climates. The best thermal performance is obtained when massive material layers are located at the inner side and directly exposed to the interior space.

Abstract Energy conversion efficiency increase in power plants with high-temperature gas-cooled reactors via implementation of the bottoming cycle was investigated under nominal and minimal thermal load of a high-temperature reactor (HTR). Heat transfer surface area and turbine outlet volumetric flow rate in bottoming cycles was also investigated. Water and two low-boiling point working fluids (ammonia and ethanol) were analyzed. Analyzed thermodynamic cycles consisted of a closed Joule-Brayton cycle with helium as working medium, which was investigated in configurations with heat regeneration, compressor intercoolers, and in a simple design. Organic versus steam Rankine cycles were compared; low-boiling point fluids under supercritical conditions in some configurations provide higher cycle energy efficiency than the gas-steam cycle. Volumetric flow rates in the last turbine stages were reduced against the steam turbine to 38% and 0.8% with ethanol and ammonia, respectively. The steam Rankine cycle configuration provided the smallest heat transfer surface increase compared with the base cycle.