• Energy Research
• RU close

The insertion of quantum dots in a host material produces band offsets which are greatly dependent on the field of strains brought about by this insertion. Based on the Empiric KP Hamiltonian model, the energy spectrum of the quantum dot/host system is easily calculated and a relationship between the conduction and valence band offsets is determined by the energy at which the lowest peak of the sub-bandgap quantum efficiency of an intermediate band solar cell is situated; therefore knowledge of the valence band offset leads to knowledge of both offsets. The calculated sub-bandgap quantum efficiency due to the quantum dot is rather insensitive to the value of the valence band offset. However, the calculated quantum efficiency of the wetting layer, modeled as a quantum well, is sensitive to the valence band offset and a fitting with the measured value is possible resulting in a determination of both offsets in the finished solar cell with its final field of strains. The method is applied to an intermediate-band solar cell prototype made with InAs quantum dots in GaAs.

The project FULLSPECTRUM — an Integrated Project (IP) in the terminology of the European Commission — pursues a better exploitation of the FULL solar SPECTRUM by (1) further developing concepts already scientifically proven but not yet developed and (2) by trying to prove new ones in the search for a breakthrough in photovoltaic (PV) technology. More specific objectives are the development of: (a) III–V multijunction cells (MJC), (b) solar thermo-photovoltaic (TPV) converters, (c) intermediate band (IB) materials and cells (IBC), (d) molecular-based concepts (MBC) for full PV utilisation of the solar spectrum and (e) manufacturing technologies (MFG) for novel concepts including assembling. MJC technology towards 40% efficiency will be developed using lower cost substrates and high light concentration (up or above 1000 suns). TPV is a concept with a theoretically high efficiency limit because the entire energy of all the photons is used in the heating process and because the non-used photons can be fed back to the emitter, therefore helping in keeping it hot. In the IBC approach, sub-bandgap photons are exploited by means of an IB. Specific IB materials will be sought by direct synthesis suggested by material-band calculations and using nanotechnology in quantum dot (QD) IBCs. In the development of the MBC, topics such as the development of two-photon dye cells and the development of a static global (direct and diffuse) light concentrator by means of luminescent multicolour dyes and QDs, with the radiation confined by photonic crystals, will be particularly addressed. MFG include optoelectronic assembling techniques and coupling of light to cells with new-optic miniconcentrators.

The segmental approach has been considered to analyze dark and light I-V curves. The photovoltaic (PV) dependence of the open-circuit voltage (Voc), the maximum power point voltage (Vm), the efficiency (?) on the photogenerated current (Jg), or on the sunlight concentration ratio (X), are analyzed, as well as other photovoltaic characteristics of multijunction solar cells. The characteristics being analyzed are split into monoexponential (linear in the semilogarithmic scale) portions, each of which is characterized by a definite value of the ideality factor A and preexponential current J0. The monoexponentiality ensures advantages, since at many steps of the analysis, one can use the analytical dependences instead of numerical methods. In this work, an experimental procedure for obtaining the necessary parameters has been proposed, and an analysis of GaInP/GaInAs/Ge triple-junction solar cell characteristics has been carried out. It has been shown that up to the sunlight concentration ratios, at which the efficiency maximum is achieved, the results of calculation of dark and light I-V curves by the segmental method fit well with the experimental data. An important consequence of this work is the feasibility of acquiring the resistanceless dark and light I-V curves, which can be used for obtaining the I-V curves characterizing the losses in the transport part of a solar cell.

AbstractResearch into the formation of InAs quantum dots (QDs) in GaAs using the metalorganic vapor phase epitaxy technique is presented. This technique is deemed to be cheaper than the more often used and studied molecular beam epitaxy. The best conditions for obtaining a high photoluminescence response, indicating a good material quality, have been found among a wide range of possibilities. Solar cells with an excellent quantum efficiency have been obtained, with a sub‐bandgap photo‐response of 0.07 mA/cm2 per QD layer, the highest achieved so far with the InAs/GaAs system, proving the potential of this technology to be able to increase the efficiency of lattice‐matched multi‐junction solar cells and contributing to a better understanding of QD technology toward the achievement of practical intermediate‐band solar cells. Copyright © 2016 John Wiley & Sons, Ltd.

The energy spectrum of the confined states of a quantum dot intermediate band (IB) solar cell is calculated with a simplified model. Two peaks are usually visible at the lowest energy side of the subbandgap quantum-efficiency spectrum in these solar cells. They can be attributed to photon absorption between well-defined states. As a consequence, the horizontal size of the quantum dots can be determined, and the conduction (valence) band offset is also determined if the valence (conduction) offset is known.

A procedure for measuring the overheating temperature (ΔT ) of a p-n junction area in the structure of photovoltaic (PV) cells converting laser or solar radiations relative to the ambient temperature has been proposed for the conditions of connecting to an electric load. The basis of the procedure is the measurement of the open-circuit voltage (VO C ) during the initial time period after the fast disconnection of the external resistive load. The simultaneous temperature control on an external heated part of a PV module gives the means for determining the value of VO C at ambient temperature. Comparing it with that measured after switching OFF the load makes the calculation of ΔT possible. Calibration data on the VO C = f(T ) dependences for single-junction AlGaAs/GaAs and triple-junction InGaP/GaAs/Ge PV cells are presented. The temperature dynamics in the PV cells has been determined under flash illumination and during fast commutation of the load. Temperature measurements were taken in two cases: converting continuous laser power by single-junction cells and converting solar power by triple-junction cells operating in the concentrator modules.

A number of important but little-investigated problems connected with III-V/Ge heterostructure in the GaInP/GaInAs/Ge multijunction solar cells grown by MOVPE are considered in the paper. The opportunity for successfully applying the combination of reflectance and reflectance anisotropy spectroscopy in situ methods for investigating III-V structure growth on a Ge substrate has been demonstrated. Photovoltaic properties of the III-V/Ge narrow-band subcell of the triple-junction solar cells have been investigated. It has been shown that there are excess currents in the Ge photovoltaic p-n junctions, and they have the tunneling or thermotunneling character. The values of the diode parameters for these current flow mechanisms have been determined. The potential barrier at the III-V/Ge interface was determined and the origin of this barrier formation during MOVPE heterogrowth was suggested.