• Energy Research
• Publications close
• CN close
• TH close

ABSTRACT: Charging infrastructure supports the rapid development of China's new energy vehicle industry. It not only plays a decisive role in providing accessible and convenient services for electric vehicle (EV) users but also, in one of the seven new infrastructure areas, plays an important role in stabilizing growth and unleashing economic potential during the new coronavirus (COVID-19) pandemic, impacting China's economy. In this study, the system dynamics model was used to predict the development of the EV industry and the demand for charging infrastructure, while considering the influence of policy, increase in EV mileage, and consumer purchase intention index. Furthermore, using the matching of EVs and charging infrastructure in Beijing and policy-oriented sensitivity analysis, a simulation of the construction of battery swap taxis and power stations under three policy scenarios was conducted. This research shows that with policies implemented to support charging infrastructure and swapping compatible taxis, Beijing can achieve its goal of replacing all EVs with fast-swap batteries and fast-charging functions within three years.

Abstract Energy storage systems (ESS) are widely used in active distribution networks (ADN) to smoothen the drastic fluctuation of renewable energy sources (RES). In order to enhance the scalability and flexibility of ESS, a virtual energy storage system (VESS), which is composed of battery energy storage system (BESS), RES as well as flexible loads (FL), is developed in this paper to realize the functionalities of ESS in more cost-effective way in ADN. Aiming at achieving voltage regulation, dynamic pricing strategies based on system voltage condition are designed for VESS. A distributed real-time power management model containing dynamic pricing strategies is proposed to accomplish the voltage regulation and economic power sharing in VESS. Moreover, a set of distributed algorithms, over time-varying unbalanced directed networks, are designed for dynamic pricing strategies and optimal power management model. Furthermore, the convergence property, optimality and system voltage stability are explained by detailed mathematical analysis. Three various case studies which were ran on a real time digital simulator (OPAL-RT OP5600) were designed to validate the effectiveness of the strategy. Finally, simulation results show that the economic power dispatch and voltage regulation are achieved among VESS simultaneously, even in the presence of time-varying directed and unbalanced communication networks.

The path congestion and communication risks of electric power communication network have emerged as the carried businesses are becoming more and more heavy. In this paper, a multi-objective optimization method for power communication network routing considering the importance of the carried businesses is proposed to reduce load imbalance and transmission risk. Firstly, information entropy is introduced as the objective of communication network load balancing optimization. And a risk assessment model for power communication network nodes and links is established. Then fuzzy membership functions are adopted to singularize the two objectives to jointly optimize path congestion and communication risks. The device nodes are dynamically divided according to the carried businesses to pursue the global optimization of the power communication network in which the Yen's algorithm is adopted. Finally, this paper uses the IEEE 30-bus communication network to carry out case simulations and analyzes the proposed method to verify the effectiveness and feasibility.

ABSTRACTIn this paper, the heat transfer characteristics of a 2D gas–solid spout fluidized bed with a hot gas jet are investigated using computational fluid dynamics-discrete element method. The in...

In this paper, we study the interactions among interconnected autonomous microgrids, and propose a joint energy trading and scheduling strategy. Each interconnected microgrid not only schedules its local power supply and demand, but also trades energy with other microgrids in a distribution network. Specifically, microgrids with excessive renewable generations can trade with other microgrids in deficit of power supplies for mutual benefits. Since interconnected microgrids operate autonomously, they aim to optimize their own performance and expect to gain benefits through energy trading. We design an incentive mechanism using Nash bargaining theory to encourage proactive energy trading and fair benefit sharing. We solve the bargaining problem by decomposing it into two sequential problems on social cost minimization and trading benefit sharing, respectively. For practical implementation, we propose a decentralized solution method with minimum information exchange overhead. Numerical studies based on realistic data demonstrate that the total cost of the interconnected-microgrids operation can be reduced by up to 13.2% through energy trading, and an individual participating microgrid can achieve up to 29.4% reduction in its cost through energy trading. To appear in IEEE Transactions on Smart Grid

AbstractHeterojunction CdS/CdTe thin film solar cells were fabricated with a superstrate structure consisting of the successive layers: soda lime glass/ITO/CdS/CdTe/back contact. ZnTe:Cu films were deposited on the back surface of the CdTe layer presenting as ohmic back contact. The substrate was soda lime glass coated with ITO films by rf magnetron sputtering serving as the transparent front contact. A thin layer of CdS with thickness about 80nm was applied by chemical bath deposition. Close-spaced sublimation of the CdTe films was accomplished by placing a CdTe source in a close proximity (6mm) to the substrate in vacuum chamber with low pressure about 3×10-2 mbar. The source was heated to 550 ∘C and the substrate to 450 ∘C. This arrangement causes Cd and Te to sublime from source and diffuse to the substrate. The fabricated cells were investigated using current-voltage (I-V) in the temperature range 20-300K under a standard AM1.5 illumination in order to define the transport mechanism in the heterojunction. Tunnelling enhanced interface recombination has been found to dominate carrier transport mechanism in the junction at all investigated temperatures.

The precise linearization method based on the theory of differential geometry is used in TCSC stabilized controller's design. It is mainly considered that TCSC stabilized controller is designed with linear quadratic optimal control theory after the one machine - infinity bus system with TCSC is precisely linearized, compared with traditional PID controller in MATLAB/Simulink simulation. The results of computer simulation indicate that TCSC nonlinear controller based on differential geometry can not only improve the static stability of system, but also effectively damp power oscillation and enhance the transient stability of system when the power system suffers small disturbance and short circuit. In addition, it also illuminates that nonlinear control is more effective than traditional PID control, and possess certain robustness and self- adaptability.

Wind characteristics (e.g., mean wind speed, gust factor, turbulence intensity and integral scale, etc.) are quite scattered in different measurement conditions, especially during typhoon and/or hurricane processes, which results in the structural engineer ambiguously determining the wind parameters in wind-resistant design of buildings and structures in cyclone-prone regions. In tropical cyclones (including typhoons and hurricanes), the inconsistent wind characteristics may be in part ascribed to the complex flow structure with the coexistence of both mechanical and convective turbulence in the boundary layer of tropical cyclones. Another significant contribution to the scattered wind characteristics is due to various measurement conditions (e.g., terrain exposure and height) and data processing schemes (e.g., averaging time). The removal of the inconsistency in the field-measurement system may offer a more rational comparison of measured wind data from various observation platforms, and hence facilitates a better identification scheme of the wind characteristics to guide the urban planning design and wind-resistant design of buildings and structures. In this study, an analytical framework was firstly proposed to eliminate the potential observation-related effects in wind characteristics and then the wind characteristics of seven field measured tropical cyclones (four typhoons and three hurricanes) were comparatively investigated. Specifically, field measurements of wind characteristics were converted to a standard reference station with a roughness length of 0.03 m, observation duration of 10 min for mean wind and averaging time of 3 s for gusty wind at a 10 m height. The differences of the measured wind characteristics between the typhoons and hurricanes were highlighted. The standardized turbulent wind characteristics under the analytical framework for typhoons and hurricanes were compared with the corresponding recommendations in standard of American Society of Civil Engineers (ASCE 7-10) and Architectural Institute of Japan Recommendations for Loads on Buildings (AIJ-RLB-2004).

Abstract With the rapid advancement in wearable electronics, energy harvesting devices based on triboelectric nanogenerators (TENGs) have been intensively investigated for providing sustainable power supply for them. However, the fabrication of wearable TENGs still remains great challenges, such as flexibility, breathability and washability. Here, a route to develop a new kind of woven-structured triboelectric nanogenerator (WS-TENG) with a facile, low-cost, and scalable electrospinning technique is reported. The WS-TENG is fabricated with commercial stainless-steel yarns wrapped by electrospun polyamide 66 nanofiber and poly(vinylidenefluoride-co-trifluoroethylene) nanofiber, respectively. Triggered by diversified friction materials under a working principle of freestanding mode, the open-circuit voltage, short-circuit current and maximum instantaneous power density from the WS-TENG can reach up to 166 V, 8.5 µA and 93 mW/m2, respectively. By virtue of high flexibility, desirable breathability, washability and excellent durability, the fabricated WS-TENG is demonstrated to be a reliable power textile to light up 58 light-emitting diodes (LED) connected serially, charge commercial capacitors and drive portable electronics. A smart glove with stitched WS-TENGs is made to detect finger motion in different circumstances. The work presents a new approach for self-powered textiles with potential applications in biomechanical energy harvesting, wearable electronics and human motion monitoring.