• Energy Research
• Closed Access close
• Embargo close
• engineering and technology close
• JP close
• TH close

Abstract Socio-technical transformations towards low-carbon energy systems are on the way in developed countries. Conversely, developing countries tend to be locked in fossil fuels and foster coal-based energy structures, emphasizing reliable and cost-effective energy provision and sidelining environmental concerns. In this study, we identified and analysed the predominant factors related to coal-based power generation in Bangladesh. We applied a mixed-method approach, initially conducting a systematic literature review and, subsequently, semi-structured expert interviews to identify and validate relevant factors. We then assessed their relative importance using an Analytical Hierarchy Process based on expert judgments. The results of this assessment reveal that socio-economic aspects and environmental issues scored highest, while technological aspects and sector regulations were considered to be less relevant for large-scale coal power implementation. We conclude that future energy policies created in Bangladesh will need to use appropriate legal instruments and address issues such as human displacement and resettlement, low levels of public acceptance, health hazards and environmental pollution. Participative policy frameworks should be deployed in coal plant projects, and active monitoring systems are necessary to reduce the negative consequences associated with increased electrification and energy consumption. To address foreseeable structural challenges, it furthermore will be crucial to explore sustainable alternatives.

Abstract: The dynamics of reformation and replacement of gas hydrates were studied under nonequilibrium conditions. It was found that the reformation of gas hydrates is largely affected by the state of the gas‐water system and the restarting temperature. This suggests that the effects are caused by changes in the structure of the aqueous solution at a molecular level. Pure samples of CH4 gas hydrate were synthesized from ice crystals and the dissociated solution using the reformation method. Replacement of CO2 gas hydrate is achieved within a short duration in the solid‐phase sample of CH4 gas hydrate, if the pressure and temperature is precisely controlled in a pressure vessel.

Abstract The commonly used transmutation rate of minor actinides in nuclear reactors is decomposed into four components, overall fission rate, Pu production rate, MA production rate, and element production rate. The physical meanings of these factors are described. The transmutation rates of minor actinides in two types of highly-moderated PWRs, a MOX fueled Na cooled fast reactor, and a metal fueled Pb cooled fast reactor are interpreted using the four components. The metal fueled Pb cooled fast reactor can incinerate minor actinides most (79kg/GWth/year), and this amount is about 4 times larger than the thermal reactors. The thermal reactors have large relative overall fission rates for 241 Am and have a potential for the incineration of 241 Am.

Analytical and experimental studies of a brushless, exciterless, single-phase, sinusoidal-wave synchronous machine operating as a generator or a motor, derived from a three-phase machine, are reported. One phase armature winding of the three-phase machine is used as an auxiliary stator winding of the single-phase machine and is used to supply the exciting power for the other two-phase armature windings acting as the load winding of the single-phase machine. A 1.5 kW, 200 V, 60 Hz, four-pole synchronous machine was used the experiments. It is shown that the waveforms of the armature terminal voltage and the load current are nearly sinusoidal. The advantages of the single-phase machine as a portable generator or small-load motor are discussed. >

Abstract This study demonstrates the possibility to use energy-cost optimal building designs based on life cycle approach. There is a lack of studies that cover the comprehensive assessment of both embodied energy (EE) and operational energy (OE) in a single optimization problem. The primary goal of the current study is to compare the optimized results of using OE+EE together and OE only. The optimization is performed on a case study building (townhouse) in Finland with three structural alternatives (i.e., reinforced concrete (RC); cross-laminated timber (CLT) and Steel). Different options for insulation thickness of external wall, roof, floor and window types were considered as decision variables as the scope of the present study is on building envelope. The objectives of the optimization are to minimize life cycle energy (LCE) and life cycle costs (LCC). The LCE difference between the most and least energy efficient solution on the pareto front is greater in case of the OE optimization, compared to OE+EE optimization. For all studied structures, the EE of the optimal solutions from OE+EE optimization ranges 16%–23% of LCE. Many of the non-dominated optimal solutions obtained from the OE+EE optimization shows a higher U-value for the building envelope components compared to the optimal solutions from the OE optimization. A relationship between both OE and EE with the overall thermal resistance of the building envelope is discussed to obtain a deeper understanding of such differences in U-value for the optimal solutions obtained from the OE+EE and OE optimization.

Abstract Methane dry reforming with CO2 using FeO powder in molten salt has been investigated at various flow rates of CH4/CO2 mixed gases (CH4/CO2=1) between 50 and 400 ml/min at 1223 K in an infrared furnace. This work is carried out to determine the usefulness of this method for the chemical storage of solar energy. The CH4/CO2 mixed gases passing through the molten salt (Na2CO3/K2CO3=1) containing the FeO powder were catalytically decomposed into CO, H2 and H2O. The product gas mole ratios, CO/H2/H2O, were shown to be 3:1:1 for a high flow rate of 200 ml/min and to be CO/H2=2:1 for a low flow rate of 50 ml/min. The results were explained in terms of the kinetics of the CH4-reforming reaction and the thermodynamics of the redox process of FeO powder mixed in the molten salt; CH 4 +2FeO⇒2Fe+H 2 +CO+H 2 O Fe+CO 2 ⇒FeO+CO for a high flow rate, and FeO+CH 4 ⇒Fe+2H 2 +CO Fe+CO 2 ⇒FeO+CO for a low flow rate.

Abstract The 2013/2017 Nankai Trough (Japan) and 2017 Shenhu Area (China) offshore methane hydrate production tests showed the world the possibility and feasibility of the oceanic methane hydrate production by depressurization. However, the relatively low gas production rate still remained as one of the critical bottlenecks for the economical utilization. This study chose the Nankai Trough as a target area, and aimed at the gas recovery enhancement from the methane hydrate reservoir using vertical wells. A traditional single-vertical-well system and a new dual-vertical-well system were proposed, and special production strategies of the aggressive depressurization and permeability improvement were applied to these two systems for the effectiveness verification. Based on the 15-year simulation results, it was found that the middle low-permeability silt-dominated layers in the reservoir held the key to the gas recovery enhancement, and for the single-vertical-well system, the permeability improvement in this sublayer seemed more reliable and feasible than the aggressive depressurization. On the other hand, the dual-vertical-well system significantly exceeded the single-vertical-well system due to the synergistic effect of the two wellbores, and could raise the average gas production rate (9.5 × 103 m3/day) by one order of magnitude (to 7.9 × 104 m3/day). Moreover, if this new system was combined with the aggressive depressurization, the average gas production rate could be further raised by one order of magnitude (to 3.4 × 105 m3/day).

The concept of a high temperature fast reactor cooled by supercritical water (SCFR-H) was developed for achieving high thermal efficiency and a compact reactor system. The core characteristics were obtained from single channel thermal-hydraulic analysis. Thus, it is necessary to carry out subchannel analysis to estimate the effect of local power peaking and cross flows. For this purpose, a subchannel analysis code is developed. It is verified by comparing the results with experimental data of High Conversion Pressurized Water Reactor (HCPWR). Sensitivities of the outlet coolant and cladding temperature to the subchannel flow area and local power peaking are high. One of the reasons is that the ratio of the coolant flow rate of SCFR-H to the power is smaller than that of LWR. Another reason is that, temperature of supercritical water is more sensitive to the enthalpy change above 450°C. The outlet coolant temperature distribution can be flattened by reducing the area of the peripheral subchannels and by enhancing the mixing between the subchannels.