• Energy Research
• 13. Climate action close
• 11. Sustainability close
• 6. Clean water close
• 8. Economic growth close
• PL close
• UA close

Purpose. In modern conditions of energy consumption growth and a rapid increase in energy prices the actual problem is the development and implementation of energy efficiency programs and resource-saving conversion in to a source to provide the needs of industry and municipal power. The paper aims to solve the urgent problem of energy saving and efficient use of fuel-energy ones and heat supply system optimization on the basis of Uman National University of Horticulture (UNUH). Methodology. The work investigated the process of heating and hot water supply in the course of 2007-2015 years. Implementation of current problems of energy saving is grounded on the scientific-practical and efficient assurance of fuel and energy usage. At the same time energy-saving technologies are viewed as a priority direction of the energy sector development, reduction of man-induced impact on the environment and as a way of improving the competitiveness of the national economy. Findings. Statistical data acquisition and analyzing of gas flow and outside air temperature for nine years was carried out. On the basis of this analysis, the problem was identified and specific targets for its solutions were set. Originality. Scientific novelty lies in solving the problem of energy saving and efficient use of fuel resources in Ukraine through the use of a systematic approach, the methodology development of efficient use of different fuels and optimization of local heating operation, applying contemporary automation and control systems. Firstly it was in detail analyzed and conducted the comprehensive assessment of various factors influence on energy conservation. It takes into account the human factor, professionalism and responsibility of the operators of boilers and their superiors, as well as the relevant control services. Practical value. For UNUH campus hybrid use of solid fuel and gas boilers was carried out. Decentralization of the university heating system has been conducted through the restoration of 350 individual heating systems in residential buildings, remote departments and campus dormitories. The conclusions propose the list of activities upon the real economy of fuel and energy resources, and measures to overcome the economic and political crisis in the country.

European harmonisation of construction products provides a uniform expression of performance aspects relevant for essential characteristics coming from notified technical building regulations of the EU Member States. Since the current regulation has been in force for over seven years, this study evaluates further possibilities of its evolution, including a more efficient approach to implementing environmental sustainability aspects. The provided research is based on qualitative analysis of the past and current legislation, official documents, related guidance, judgements, scientific articles and the author’s practical experience coming from participation in the European committees, organisations and standardisation activities. Various legislative techniques and regulatory tools that could be potentially used to review the Construction Products Regulation are analysed and compared with regards to their impact on the inclusion of environmental sustainability principles. Therefore, the objective of this research is to provide substantive grounds that can be directly or indirectly used in the policymaking processes on the European and national level.

The dynamic process of movement of vehicles in cities is associated with interaction with objects of the road environment. Road conditions, traffic and pedestrians require certain actions from the driver to ensure road safe-ty. Under such circumstances, the reliability and safety of road traffic in human-machine systems mainly depends on the functional state of the driver (provided that the technical component, the subsystem is “car”) and his ability to respond to changes in the traffic situation when obstacles arise (conflict situations). The development of states of tension and fatigue of the driver is associated with an increase in energy costs, which leads to a natural in-crease in the heart rate, respiration and other parameters indicating changes in the energy balance of the driver's body. Eye Tracking technology has been applied to detect attention. Energy costs were determined using a method that takes into account the frequency of the driver's external respiration when driving on the road and in the background. As a result, a model of change in the attention of drivers with driving experience and a model of en-ergy consumption when driving in the evening twilight at a certain level of illumination were obtained. To determine the influence of conflict situations during movement in the evening twilight on the indicator of attention and energy consumption of the driver, a study was carried out in real conditions on city streets. A group of drivers with experience of 3-5 years and 10-16 years performed arrivals in the evening twilight on passenger cars "C" class. Experimental studies of the indicator of drivers' attention and functional state in conditions of evening twilight were carried out on different categories of city streets. The study involved drivers between the ages of 20 and 40. The obtained dependences of the change in the driver's functional state on illumination showed that at low illumination levels in the evening twilight, a rapid increase in the driver's functional state shifts. Thus, the energy consumption of the driver while driving depends on the types of conflict situations and the level of illumination. It was found that for drivers with less than 5 years of driving experience, shifts in functional state were more im-portant than other drivers. Also, such drivers had lower attention indicators compared to experienced drivers with more than 10 years of driving experience. It was found that when the illumination changes at dusk, the energy consumption increases on average to 3.3 kcal / min for drivers with less than 5 years of experience, and for drivers with more than 10 years of experience, it increases by 2.4 kcal / min on average. Keywords: driver, conflict situations, attention, energy costs.

In this work, which is related to the current European Parliament Regulation on restrictions affecting refrigeration, four new three-component refrigerants have been proposed; all were created using low Global Warming Potential(GWP) synthetic and natural refrigerants. The considered mixtures consisted of R32, R41, R161, R152a, R1234ze (E), R1234yf, R1243zf, and RE170. These mixtures were theoretically tested with a 10% step in mass fraction using a triangular design. The analysis covered two theoretical cooling cycles at evaporating temperatures of 0 and −30 °C, and a 30 °C constant condensing temperature. The final stage of the work was the determination of the best mixture compositions by thermodynamic and operational parameters. R1234yf–R152a–RE170 with a weight share of 0.1/0.5/0.4 was determined to be the optimal mixture for potentially replacing the existing refrigerants.

AbstractIndirect climate effects on tree fecundity that come through variation in size and growth (climate-condition interactions) are not currently part of models used to predict future forests. Trends in species abundances predicted from meta-analyses and species distribution models will be misleading if they depend on the conditions of individuals. Here we find from a synthesis of tree species in North America that climate-condition interactions dominate responses through two pathways, i) effects of growth that depend on climate, and ii) effects of climate that depend on tree size. Because tree fecundity first increases and then declines with size, climate change that stimulates growth promotes a shift of small trees to more fecund sizes, but the opposite can be true for large sizes. Change the depresses growth also affects fecundity. We find a biogeographic divide, with these interactions reducing fecundity in the West and increasing it in the East. Continental-scale responses of these forests are thus driven largely by indirect effects, recommending management for climate change that considers multiple demographic rates.

Abstract Increasing electrification of final uses can be a viable solution towards low-carbon energy systems, when coupled with local renewable power generation. Mountain areas can already benefit from high shares of hydro-power generation, but, at the same time, rely on oil products for transport and for the heating sector in remote areas where natural gas infrastructures are not available. This research work evaluates potential scenarios for the electrification of transport and heating sectors, by coupling the simulation tool EnergyPLAN with a multi-objective optimization algorithm to analyse economic and environmental aspects. Results show that the largest benefits are expected from the electrification of the heating sector. Indeed, a CO2 emissions reduction up to 30% can be reached by acting on the transport sector alone, while up to 65% combining it with measures on heating, industry and agriculture sectors and additional electricity generation from photovoltaic systems. Moreover, the use of heat pumps can lead to significant CO2 emissions decrease with only to a slight increase in the overall annual costs thanks to lower variable costs that partly compensate the higher required initial investment and electricity storage deployment. The optimization analyses also highlight the effect of progressive penetration of electric vehicles in the private cars fleet and hydrogen trucks in the light-duty vehicles one.

Mobile Global Navigation Satellite System (GNSS) measurements carried out on the railway consist of using satellite navigation systems to determine the track geometry of a moving railway vehicle on a given route. Their purposes include diagnostics, stocktaking, and design work in railways. The greatest advantage of this method is the ability to perform measurements in a unified and coherent spatial reference system, which effectively enables the combining of design and construction works, as well as their implementation by engineering teams of diverse specialties. In the article, we attempted to assess the impact of using three types of work mode for a GNSS geodetic network [Global Positioning System (GPS), GPS/Global Navigation Satellite System (GLONASS) and GPS/GLONASS/Galileo] on positioning availability at three accuracy levels: 1 cm, 3 cm and 10 cm. This paper presents a mathematical model that enables the calculation of positioning availability at these levels. This model was also applied to the results of the measurement campaign performed by five GNSS geodetic receivers, made by a leading company in the field. Measurements with simultaneous position recording and accuracy assessment were taken separately on the same route for three types of receiver settings: GPS, GPS/GLONASS and GPS/GLONASS/Galileo in an urban area typical of a medium-sized city. The study has shown that applying a two-system solution (GPS/GLONASS) considerably increases the availability of high-precision coordinates compared to a single-system solution (GPS), whereas the measurements with three systems (GPS/GLONASS/Galileo) negligibly increase the availability compared to a two-system solution (GPS/GLONASS).