• Energy Research
• 2021-2025close
• Restricted close
• Embargo close
• US close
• CA close
• PL close

(Abstract) This paper proposes a new power line communication (PLC) architecture for monitoring and remote control of Distributed Generators (DG) and Energy Storage Systems (ESS) connected to low voltage distribution networks. The final aim is to improve the performance of the PLC link in terms of robustness and efficiency in devices addressing. The proposed solution is based on a concentrator, to be installed in secondary substation, and a new PLC bridge, to be linked both to inverters and interface protection systems of DGs or ESSs. In this way, a communication link is obtained between distribution system operator (DSO) and DG or ESS owners. The proposed system is able to provide advanced functions for the remote control of DGs and ESSs inverters, not only in terms of remote disconnection but also in terms of adjusting the inverter operating modes.

(Abstract) This paper proposes a new power line communication (PLC) architecture for monitoring and remote control of Distributed Generators (DG) and Energy Storage Systems (ESS) connected to low voltage distribution networks. The final aim is to improve the performance of the PLC link in terms of robustness and efficiency in devices addressing. The proposed solution is based on a concentrator, to be installed in secondary substation, and a new PLC bridge, to be linked both to inverters and interface protection systems of DGs or ESSs. In this way, a communication link is obtained between distribution system operator (DSO) and DG or ESS owners. The proposed system is able to provide advanced functions for the remote control of DGs and ESSs inverters, not only in terms of remote disconnection but also in terms of adjusting the inverter operating modes.

Electric vehicles (EVs) are considered a substitute for fossil-fueled vehicles due to rising fossil fuel prices and accompanying environmental concerns, and their use is predicted to increase dramatically shortly. However, the widespread use of EVs and their large-scale integration into the energy system will present several operational and technological hurdles. In the energy industry, an innovative solution known as the EVs smart parking lot (SPL) is introduced to handle EV charging and discharging electricity and energy supply challenges. This paper investigates social equity access and mobile charging stations (MCSs) for EVs, where the owner of MCSs is the EV parking lot. Accordingly, a new self-scheduling model for SPLs is presented in this paper that incorporates scheduling of the MCSs as temporary charging infrastructures while considering social equity access and optimizes SPL energy generation and storage schedule. The main objectives of this research are to (i) develop MCSs accessibility measures and quantify the equity impacts of MCSs locations by modeling prioritized demand based on several indices; (ii) determine the optimal set-points of SPL components (i.e., combined heat and power (CHP), photovoltaic system, electrical and heat-energy storage, and MCSs) to manage electrical peak demand and to maximize the economic benefits of SPLs. Results indicate that the proposed demand prioritization function model can meet the required EV charging demands for prioritized events, and the self-scheduling model for SPLs satisfies the charging demand of the EVs in the SPL location. Also, the social equity access to the EV charging stations is satisfied by analyzing the operation of MCSs around the prioritized demand of the prioritized events and social equity access indices.

Electric vehicles (EVs) are considered a substitute for fossil-fueled vehicles due to rising fossil fuel prices and accompanying environmental concerns, and their use is predicted to increase dramatically shortly. However, the widespread use of EVs and their large-scale integration into the energy system will present several operational and technological hurdles. In the energy industry, an innovative solution known as the EVs smart parking lot (SPL) is introduced to handle EV charging and discharging electricity and energy supply challenges. This paper investigates social equity access and mobile charging stations (MCSs) for EVs, where the owner of MCSs is the EV parking lot. Accordingly, a new self-scheduling model for SPLs is presented in this paper that incorporates scheduling of the MCSs as temporary charging infrastructures while considering social equity access and optimizes SPL energy generation and storage schedule. The main objectives of this research are to (i) develop MCSs accessibility measures and quantify the equity impacts of MCSs locations by modeling prioritized demand based on several indices; (ii) determine the optimal set-points of SPL components (i.e., combined heat and power (CHP), photovoltaic system, electrical and heat-energy storage, and MCSs) to manage electrical peak demand and to maximize the economic benefits of SPLs. Results indicate that the proposed demand prioritization function model can meet the required EV charging demands for prioritized events, and the self-scheduling model for SPLs satisfies the charging demand of the EVs in the SPL location. Also, the social equity access to the EV charging stations is satisfied by analyzing the operation of MCSs around the prioritized demand of the prioritized events and social equity access indices.

Engineered cementitious composites (ECCs) are special types of fibre-reinforced cementitious composites (FRCC) with higher strain capacity which can be achieved with low fibre volume as low as 2% and total elimination of coarse aggregates. Due to the outstanding performance of ECCs, they are suitable for various construction and repair applications. However, in order for ECCs to achieve their properties; a high amount of binder which is primarily composed of Portland cement (PC) is used alongside a special type of ultrafine silica sand (USS) which is different from the conventional natural fine aggregates. The production of PC is known to be detrimental to the environment due to its high carbon dioxide emissions coupled with the high consumption of natural resources. Thus, the high use of PC content in ECCs posed a sustainability threat. Similarly, the USS used in ECCs are not readily available everywhere and are expensive. The processing of the USS coupled with its transportation over long distances would also increase the cost and embodied carbon of ECCs. Hence, in order to promote more development and applications of ECCs for various applications; this dissertation aims to provide innovative ways to improve the sustainability of ECCs and their performances. This dissertation offers four solutions to improve the sustainability of ECCs which are (i) use of unconventional industrial by-products as partial replacement of PC (ii) total replacement of PC in ECCs with alternative sustainable binders (iii) replacement of USS in ECCs with recycled materials and (iv) the use of supplementary cementitious materials to replace a high volume of PC. The findings from this study revealed sustainable ECCs with acceptable mechanical and durability performance can be achieved with the use of alternative binders or replacement of the conventional USS used in ECC mixtures. The sustainability and cost assessment of the ECCs indicated that the incorporation of industrial by-products such as blast furnace slag (BFS) especially at higher content is beneficial to reducing the negative environmental impact and economic burden associated with ECCs compared to the conventional ECC. The sustainability index and cost index of the ECCs further showed that the use of BFS is more beneficial when the sustainability and cost of the ECCs are compared with the corresponding performance. Similarly, the use of recycled materials as an alternative to USS was found to result in a significant reduction in the embodied carbon and cost of ECCs. The use of recycled materials such as expanded glass (EG) as aggregates in ECCs was also found to improve the thermal insulation properties of ECCs making such ECC suitable for the production of building envelope elements.

Engineered cementitious composites (ECCs) are special types of fibre-reinforced cementitious composites (FRCC) with higher strain capacity which can be achieved with low fibre volume as low as 2% and total elimination of coarse aggregates. Due to the outstanding performance of ECCs, they are suitable for various construction and repair applications. However, in order for ECCs to achieve their properties; a high amount of binder which is primarily composed of Portland cement (PC) is used alongside a special type of ultrafine silica sand (USS) which is different from the conventional natural fine aggregates. The production of PC is known to be detrimental to the environment due to its high carbon dioxide emissions coupled with the high consumption of natural resources. Thus, the high use of PC content in ECCs posed a sustainability threat. Similarly, the USS used in ECCs are not readily available everywhere and are expensive. The processing of the USS coupled with its transportation over long distances would also increase the cost and embodied carbon of ECCs. Hence, in order to promote more development and applications of ECCs for various applications; this dissertation aims to provide innovative ways to improve the sustainability of ECCs and their performances. This dissertation offers four solutions to improve the sustainability of ECCs which are (i) use of unconventional industrial by-products as partial replacement of PC (ii) total replacement of PC in ECCs with alternative sustainable binders (iii) replacement of USS in ECCs with recycled materials and (iv) the use of supplementary cementitious materials to replace a high volume of PC. The findings from this study revealed sustainable ECCs with acceptable mechanical and durability performance can be achieved with the use of alternative binders or replacement of the conventional USS used in ECC mixtures. The sustainability and cost assessment of the ECCs indicated that the incorporation of industrial by-products such as blast furnace slag (BFS) especially at higher content is beneficial to reducing the negative environmental impact and economic burden associated with ECCs compared to the conventional ECC. The sustainability index and cost index of the ECCs further showed that the use of BFS is more beneficial when the sustainability and cost of the ECCs are compared with the corresponding performance. Similarly, the use of recycled materials as an alternative to USS was found to result in a significant reduction in the embodied carbon and cost of ECCs. The use of recycled materials such as expanded glass (EG) as aggregates in ECCs was also found to improve the thermal insulation properties of ECCs making such ECC suitable for the production of building envelope elements.

Enhanced weathering (EW) is one of the most promising negative emissions technologies urgently needed to limit global warming to at least below 2 °C, a goal recently reaffirmed at the UN Global Climate Change conference (i.e., COP26). EW relies on the accelerated dissolution of crushed silicate rocks applied to soils and is considered a sustainable solution requiring limited technology. While EW has a high theoretical potential of sequestering CO2, research is still needed to provide accurate estimates of carbon (C) sequestration when applying different silicate materials across distinct climates and major soil types in combination with a variety of plants. Here we elaborate on fundamental advances that must be addressed before EW can be extensively adopted. These include identifying the most suitable environmental conditions, improving estimates of field dissolution rates and efficacy of CO2 removal, and identifying alternative sources of silicate materials to meet future EW demands. We conclude with considerations on the necessity of integrated modeling-experimental approaches to better coordinate future field experiments and measurements of CO2 removal, as well as on the importance of seamlessly coordinating EW with cropland and forest management.

Enhanced weathering (EW) is one of the most promising negative emissions technologies urgently needed to limit global warming to at least below 2 °C, a goal recently reaffirmed at the UN Global Climate Change conference (i.e., COP26). EW relies on the accelerated dissolution of crushed silicate rocks applied to soils and is considered a sustainable solution requiring limited technology. While EW has a high theoretical potential of sequestering CO2, research is still needed to provide accurate estimates of carbon (C) sequestration when applying different silicate materials across distinct climates and major soil types in combination with a variety of plants. Here we elaborate on fundamental advances that must be addressed before EW can be extensively adopted. These include identifying the most suitable environmental conditions, improving estimates of field dissolution rates and efficacy of CO2 removal, and identifying alternative sources of silicate materials to meet future EW demands. We conclude with considerations on the necessity of integrated modeling-experimental approaches to better coordinate future field experiments and measurements of CO2 removal, as well as on the importance of seamlessly coordinating EW with cropland and forest management.