• Energy Research
• other engineering and technologies close
• 6. Clean water close
• CN close
• US close
• DE close
• UA close

Environment-friendly treatment of sewage sludge has become tremendously important. Conversion of sewage sludge into energy products by environment-friendly conversion process, with its energy recovery and environmental benefits, is being paid significant attention. Direct liquefaction of sewage sludge into bio-oils with supercritical water (SCW) was therefore put forward in this study, as de-water usually requiring intensive energy input is not necessary in this direct liquefaction. Supercritical water may act as a strong solvent and also a reactant, as well as catalyst promoting reaction process. Experiments were carried out in a self designed high-pressure reaction system with varying operating conditions. Through orthogonal experiments, it was found that temperature and residence time dominated on bio-oil yield compared with other operating parameters. Temperature from 350 to 500°C and reaction residence time of 0, 30, 60min were accordingly investigated in details, respectively. Under supercritical conversion, the maximum bio-oil yield could achieve 39.73%, which was performed at 375°C and 0min reaction residence time. Meanwhile, function of supercritical water was concluded. Fuel property analysis showed the potential of bio-oil application as crude fuel.

Summary Monitoring of microbial corrosion is always difficult because of the sessile nature of bacteria and the lack of meaningful correlation between routine bacteria counts and bacterial activity. This problem is further aggravated in a large oilfield water system because of size and sampling difficulties. This paper discusses some monitoring techniques currently used in the oil industry, their limitations, and possible areas for improvement. These improved techniques are in use or will be implemented in the Aramco systems. Introduction Microbial corrosion has caused some failures in seawater injection systems. Whether or not microbial corrosion represents a major corrosion mechanism in the oilfield water system is a controversial question. However, it has certainly become a major concern in recent years. There are two approaches in dealing with microbial corrosion problems in a large oilfield water system. One approach is to start treating the system with bactericide in conjunction with regular scraping when the system is commissioned. The other is to treat the system only when an impending microbial-related problem is clearly defined. in either case, monitoring of microbial corrosion is essential. The first approach is more or less a precautionary measure. The treatment and selection of bactericides is usually based on past experience and laboratory evaluation tests. While the treatment is being implemented, a reliable monitoring program could assess the effectiveness of the current program of microbial corrosion control. In the second case, monitoring of microbial corrosion is even more important. it would provide timely information toward implementation of a treatment program before the system could get out of control. The industry's awareness of microbial corrosion has been indicated by the number of papers published in recent years on this subject. These articles cover a wide spectrum of interest from fundamental corrosion mechanisms to case studies, detection methods, control measures, etc. Although it is not clear to what extent microorganisms are responsible for the observed field corrosion failures, the general consensus still favors early establishment of a routine microbial corrosion monitoring program. The best approach seems to he the establishment of solid baseline data for the system after which any significant future deviation can be interpreted as a sign of a potential problem. The following sections describe the current methods used for routine monitoring, specifically for Aramco's large oilfield water systems. The limitations of these methods, the difficulties encountered, and some suggested studies for modification and improvement are discussed also. Current Monitoring Methods The methods currently used by Aramco can be categorized as (l) cell counts in water, (2) metal surface examination, (3) scraping solids analysis, (4) water quality analysis, and (5) evaluation of current bactericide treatment. Cell Counts in Water. These are used to detect bacterial organisms and their concentrations. it is recognized that confirmation of free-flowing bacteria in the water does not automatically mean trouble. However, if bacteria counts demonstrate a definite increase across the system, or over a period of time, the odds are that bacteria are active and working on the metal somewhere in the system. Cell counts routinely monitored include sulfate-reducing bacteria (SRB), general aerobic bacteria (OAB), iron bacteria, and others. SRB are widely recognized to he primarily responsible for bacteria-induced corrosion in an anaerobic environment. Depending on the nature of the sample to be tested and the types of problems encountered (or expected) in the field, one or several different enumeration techniques are employed. For field work, the method generally used by Aramco is culturing of samples in liquid growth media specifically designed for detecting a certain group of organisms. These laboratory media are prepared using the appropriate field water as a base, with addition of general growth nutrients for the organisms. The use of field water to prepare the media provides a water composition similar to that in which the bacteria originated. The media are supplemented with other ingredients to create an environment conducive to growth of certain bacteria (e.g., certain reducing agents have to he added into the SRB media). The media then are dispensed into serum vials at exactly 9 mL [9 cm3] each and sealed with rubber stoppers and aluminum seals. JPT P. 1171

The cover of a disposal cell is an important element in the long-term stability of a reclaimed uranium tailings site. The cover is generally comprised of a radon barrier, filter, and surface erosion barrier. A study is conducted to investigate the drainage and erosion potential between the filter and radon barrier layer in response to surface water flows over a layer of riprap. A cover system is physically modeled in a hydraulics laboratory. The experimental program evaluated the interstitial velocity potential through four filters, the erosion and sediment transport potential from the radon barrier, and the filter drainage rate after passage of the surface runoff hydrograph. The results indicated that the use of traditional filter criteria to bed riprap is extremely conservative and restricts drainage. The grain size of the filter materials should be increased to enhance drainage when placed on flat (\IS\N ≤\N 5%) slopes. A relationship is presented for estimating the drainage velocity potential through a filter layer as a function of slope and gradation. A new filter criteria should be developed for overtopping flow conditions.

Abstract The Permian Basin in West Texas contains one of the thickest deposits of Permian rocks found anywhere in the world. The Embar-B lease located in southern Andrews County on the Central Basin Platform (a regional structural high in the Permian Basin) has been producing from the Leonardian Clearfork formation for over 70 years. The Clearfork formation is primarily a subtidal and intertidal carbonate rock characterized as moderate quality reservoir. Most Permian Basin fields have multiple stacked reservoirs with varying degrees of reservoir quality and there is typically a need in these maturing fields to increase reservoir contact. In 2009, a drilling campaign was launched in Embar-B with a focus on expanding the completion interval to include what was previously considered marginal pay in the deeper Wichita Albany formation. The Wichita Albany, also Leonardian in age, is composed mostly of marginal quality tidal flat rocks and is characterized by high fracture gradients and low permeability. These characteristics required an advancement in completion practices to achieve a successful stimulation. The combination of improved completions practices and an expanded target interval resulted in production double that of previous wells. This success has driven a need for an innovative development strategy and continued optimization of completion practices. Geomodeling, volumetrics, reservoir simulation, seismic attribute analysis and oil fingerprinting were all used for reservoir characterization and to determine an allocation method for commingled wells. This lead to the identification of several Clearfork/Wichita Albany locations with significant reserves potential. Re-evaluation of the completion strategy using a multidisciplinary approach indicated the need to reduce the number of perforation clusters, add a diversion mechanism, and develop multiple hydraulic fracturing designs based on reservoir quality and presence of natural fractures. Results from recent drilling programs have exceeded expectations bringing lease production up from 200 BOEPD in 2009 to a peak rate of 3153 BOEPD in 2015.

To find an appropriate method for sulfate-rich wastewater containing ethanol and acetate with COD/sulfate ratio of 1, a UASB reactor was operated for more than 180 days. The influences of HRT (hydraulic retention time) and OLR (organic loading rate) on organics and sulfate removal, gas production, and electrons utilization were investigated. The sludge activity and microorganism composition were also determined. The results indicated that this system removed more than 80% of COD and 30% of sulfate with HRT above 6h and OLR below 12.3 gCOD/L d. Further HRT decrease caused volatile fatty acids accumulation and performance deterioration. Except at HRT of 2h, COD and electron flow were mostly utilized by methane-producing archaea (MPA), and methane yield remained in the range of 0.18-0.24 LCH4/gCOD. Methane was mainly generated by Methanosaeta concilii GP6 with acetate as substrate, whereas sulfate was mainly reduced by incomplete-oxidizing Desulfovibrio species with ethanol as substrate.

AbstractThe Controlled Freeze Zone™ technology removes CO2 and H2S from natural gas in a single step cryogenic distillation process. Removal and management of acid gas impurities from natural gas pose significant challenges in developing sour gas fields. In many cases CFZ™ is capable of processing sour gases with a wide range of CO2 and H2S compositions at a lower cost than conventional technologies. The acidic components are removed as a high pressure liquid that can be injected into reservoirs for geosequestration or, when of suitable composition, to improve oil recovery. In either case, sulfur production from H2S and release of CO2 to the atmosphere can be eliminated.CFZ™ technology was successfully demonstrated through earlier pilot plant operations. Currently, ExxonMobil Upstream Research Company is advancing CFZ™ to large scale commercial readiness through a commercial demonstration plant in Wyoming, USA. By building the commercial demonstration plant at ExxonMobil’s world-class Shute Creek gas treating and acid gas injection facility, integration of CFZ™ with acid gas injection, will also be demonstrated when the unit is operated in 2010–2011.

Abstract The 2013/2017 Nankai Trough (Japan) and 2017 Shenhu Area (China) offshore methane hydrate production tests showed the world the possibility and feasibility of the oceanic methane hydrate production by depressurization. However, the relatively low gas production rate still remained as one of the critical bottlenecks for the economical utilization. This study chose the Nankai Trough as a target area, and aimed at the gas recovery enhancement from the methane hydrate reservoir using vertical wells. A traditional single-vertical-well system and a new dual-vertical-well system were proposed, and special production strategies of the aggressive depressurization and permeability improvement were applied to these two systems for the effectiveness verification. Based on the 15-year simulation results, it was found that the middle low-permeability silt-dominated layers in the reservoir held the key to the gas recovery enhancement, and for the single-vertical-well system, the permeability improvement in this sublayer seemed more reliable and feasible than the aggressive depressurization. On the other hand, the dual-vertical-well system significantly exceeded the single-vertical-well system due to the synergistic effect of the two wellbores, and could raise the average gas production rate (9.5 × 103 m3/day) by one order of magnitude (to 7.9 × 104 m3/day). Moreover, if this new system was combined with the aggressive depressurization, the average gas production rate could be further raised by one order of magnitude (to 3.4 × 105 m3/day).

In order to enhance the efficiency and benefits of the sludge anaerobic digestion process, K2FeO4 was added to a sludge anaerobic digestion system, and its effects on the system were comprehensively investigated. Results showed that sludge anaerobic digestion was greatly improved by adding 500 mg/L K2FeO4. Biogas and methane productions were increased by 26.6 and 28.4%, respectively. Sludge reduction, protein removal, and the conversion efficiency of dissolved organics were all improved. The mechanism revealed that the disintegration of sludge flocs, enhancement of protease activity, and decrease of soluble sulfide toxicity on microorganisms contributed to biogas production and sludge reduction. Biogas quality was improved, benefitting from the decreasing H2S content in biogas; as additionally, the cost of biogas desulfuration was reduced. In the biogas slurry treatment, the PO43--P concentrations were decreased by 39%, which also reduced the cost of the dephosphorization processes at certain extent.

The U.S. Environmental Protection Agency’s (EPA) Superfund—the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) database—has collected and built an open-source database based on nearly 2000 US soil remediation cases since 1980, providing detailed information and references for researchers worldwide to carry out remediation work. However, the cases were relatively independent to each other, so the whole database lacks systematicness and instructiveness to some extent. In this study, the basic features of all 144 soil remediation projects in four major oil-producing states (California, Texas, Oklahoma and Alaska) were extracted from the CERCLA database and the correlations among the pollutant species, pollutant site characteristics and selection of remediation methods were analyzed using traditional and machine learning techniques. The Decision Tree Classifier was selected as the machine learning model. The results showed that the growth of new contaminated sites has slowed down in recent years; physical remediation was the most commonly used method, and the probability of its application is more than 80%. The presence of benzene, toluene, ethylbenzene and xylene (BTEX) substances and the geographical location of the site were the two most influential factors in the choice of remediation method for a specific site; the maximum weights of these two features reaches 0.304 and 0.288.