• Energy Research
• Open Access close
• Open Source close
• 7. Clean energy close
• 15. Life on land close
• 12. Responsible consumption close
• US close
• EU close

Abstract. The impact of multiphase reactions involving nitrogen dioxide (NO2) and aromatic compounds was simulated in this study. A mechanism (CAPRAM 2.4, MODAC Mechanism) was applied for the aqueous phase reactions, whereas RACM was applied for the gas phase chemistry. Liquid droplets were considered as monodispersed with a mean radius of 0.1 µm and a liquid content (LC) of 50 µg m-3. The multiphase mechanism has been further extended to the chemistry of aromatics, i.e. reactions involving benzene, toluene, xylene, phenol and cresol have been added. In addition, reaction of NO2 with dissociated hydroxyl substituted aromatic compounds has also been implemented. These reactions proceed through charge exchange leading to nitrite ions and therefore to nitrous acid formation. The strength of this source was explored under urban polluted conditions. It was shown that it may increase gas phase HONO levels under some conditions and that the extent of this effect is strongly pH dependent. Especially under moderate acidic conditions (i.e. pH above 4) this source may represent more than 75% of the total HONO/NO2 - production rate, but this contribution drops down close to zero in acidic droplets (as those often encountered in urban environments).

Datacenter power demand has been continuously growing and is the key driver of its cost. An accurate mapping of compute resources (CPU, RAM, etc.) and hardware types (servers, accelerators, etc.) to power consumption has emerged as a critical requirement for major Web and cloud service providers. With the global growth in datacenter capacity and associated power consumption, such models are essential for important decisions around datacenter design and operation. In this paper, we discuss two classes of statistical power models designed and validated to be accurate, simple, interpretable and applicable to all hardware configurations and workloads across hyperscale datacenters of Google fleet. To the best of our knowledge, this is the largest scale power modeling study of this kind, in both the scope of diverse datacenter planning and real-time management use cases, as well as the variety of hardware configurations and workload types used for modeling and validation. We demonstrate that the proposed statistical modeling techniques, while simple and scalable, predict power with less than 5% Mean Absolute Percent Error (MAPE) for more than 95% diverse Power Distribution Units (more than 2000) using only 4 features. This performance matches the reported accuracy of the previous started-of-the-art methods, while using significantly less features and covering a wider range of use cases.

The utilization of autonomous unmanned aerial vehicles (UAVs) has increased rapidly due to their ability to perform a variety of tasks, including industrial inspection. Conducting testing with actual flights within industrial facilities proves to be both expensive and hazardous, posing risks to the system, the facilities, and their personnel. This paper presents an innovative and reliable methodology for developing such applications, ensuring safety and efficiency throughout the process. It involves a staged transition from simulation to reality, wherein various components are validated at each stage. This iterative approach facilitates error identification and resolution, enabling subsequent real flights to be conducted with enhanced safety after validating the remainder of the system. Furthermore, this article showcases two use cases: wind turbine inspection and photovoltaic plant inspection. By implementing the suggested methodology, these applications were successfully developed in an efficient and secure manner.

A specific role for the HTGR in a national energy strategy is examined. The issue is addressed in two ways. First, the role of the HTGR-GT Binary cycle plant is examined in a national energy strategy based on symbiosis between fast breeder and advanced converter reactors utilizing the thorium U233 fuel cycle. Second, the advantages of the HTGR-GT dry-cooled plant operating in arid regions is examined and compared with a dry-cooled LWR. An event tree analysis of potential benefits is applied.

This work addresses the problem of energy consumption time series forecasting. In our approach, a set of time series containing energy consumption data is used to train a single, parameterised prediction model that can be used to predict future values for all the input time series. As a result, the proposed method is able to learn the common behaviour of all time series in the set (i.e., a fingerprint) and use this knowledge to perform the prediction task, and to explain this common behaviour as an algebraic formula. To that end, we use symbolic regression methods trained with both single- and multi-objective algorithms. Experimental results validate this approach to learn and model shared properties of different time series, which can then be used to obtain a generalised regression model encapsulating the global behaviour of different energy consumption time series.

Coupling between the UEDGE (edge fluid model), GINGRED (grid generation) and CAKE (equilibrium reconstruction) codes opens the door for automated interpretative scrape-off-layer (SOL) analysis over entire discharges, providing information that is essential in efforts to couple the SOL to core transport codes. In this work, we utilize new developments in the autoUEDGE code (Izacard et al. 2018) to investigate the behavior of the DIII-D SOL during the temporal evolution of an edge-localized mode (ELM) cycle. Modeled temperature and density profiles in UEDGE are automatically matched to experimental measurements by iteratively and self-consistently adjusting transport coefficient profiles in the plasma edge. This analysis is completed over multiple ELM cycles of a well-diagnosed discharge with long (∼100ms) inter-ELM periods. Directly after the ELM crash, a short period of high-density, low-temperature conditions is observed in Langmuir probe measurements at the outer divertor. This regime is associated with enhanced Dαemission and incident particle flux, suggesting that the divertor enters a period of high recycling after an ELM crash. After about ∼25ms, divertor conditions return to their pre-ELM conditions and remain there for several tens of milliseconds. Using the autoUEDGE code, the SOL is modeled as a function of ELM cycle using upstream profiles as input. The 2D modeling successfully reproduces both divertor Thomson scattering measurements and the experimentally observed divertor dynamics. Though the recycling is kept fixed throughout the modeling, changes in particle fluxes are consistent with local experimental recycling changes induced by ELMs. Agreement between modeling and observation suggests a strong link between upstream profiles and the high-recycling divertor conditions directly following large type-I ELMs.