• Energy Research
• Restricted close
• Open Source close
• 12. Responsible consumption close
• US close
• DE close
• PK close

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.

Abstract For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72–90% and total greenhouse gas reduction by 65–79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.

Abstract Fodder for feeding pork and poultry requires a large amount of cultivated and processed agricultural crops, which are often related to greenhouse gas emissions from land-use change (LUC). Given the rapid growth in meat production in Brazil for domestic consumption and international export, the link between LUC emissions and consumption of pork and poultry meat is central to evaluating the role of Brazilian meat production and the implications for international climate policies. In this paper, we first estimate LUC emissions from soybean production destined to feed pork and poultry in Brazil during the period 2008–2012. Second, we allocate such emissions to domestic and international consumption of pork and poultry meat. Concerning international consumption, Brazilian export of meat to 189 countries is evaluated. Although the majority of the LUC emissions from soybean production are tied to the domestic consumption, 17% and 39% of the emissions embodied in Brazilian pork and poultry, respectively, are exported to other countries. The most prominent destinations of Brazilian pork and poultry in terms of embodied LUC emissions are Eastern Europe, Asia and South America. In the case of pork, the fluxes of emissions from Brazil to Ukraine (1.28 Mt CO2-eq) and Russia (1.18 Mt CO2-eq) are particularly large. In the case of poultry, the largest transfers of embodied emissions are from Brazil to developing countries and especially the Middle East. These results are relevant to environmental policies and international agreements aimed at achieving the sustainability of Brazil's meat sector.

The use of bio-plastic-based packaging as an alternative to conventional plastic packaging is increasing. Among the plethora of different bio-based plastics, the most relevant ones are those that, at the end of their life, can be treated with the organic fraction of municipal solid waste. Even in these cases, their impact on the waste processing and recycling is not always positive. This study aim to assess on a laboratory scale the influence on combined anaerobic digestion and composting industrial processes of a bio-based plastic film, namely cellulose acetate (CA), in pure and modified (additions of additive) forms. CA films were mixed with organic waste and subjected to: (i) anaerobic digestion; (ii) active composting and (iii) two stages of curing composting. Anaerobic digestion and composting were monitored through methane yield and oxygen uptake respectively; additionally, the bio-plastics degree of disintegration was assessed during all the processes. The final disintegration of pure and modified CA was 73.82% and 54.66%, respectively. Anaerobic digestion contributes to the disintegration of the material, while aerobic treatment appears to be nearly ineffective, especially for modified CA. The presence of cellulose acetate during anaerobic digestion of food waste increased the methane yield by about 4.5%. Bioassay confirmed the absence of possible toxic effects on the final compost from the bio-plastic treatment. Although bio-based materials are not the only solution to plastic pollution, the findings confirm the need to upgrade the organic waste treatment plants and the necessity to revise the requirements for the use of compost in agriculture.

Questions of justice in the transition to a green economy have been raised by various social forces. Very few proposals, however, have been as focused and developed as the “just transition” strategy proposed by global labour unions. Yet, labour unions are remarkably absent from discussions of the transition towards a green economy. This is surprising as labour unions are arguably the largest organizations in the world fighting for basic rights and more just social relations. This paper tries to advance the potential contribution of labour unions in this arena by asking: what is the full scope of “just transition” today and how have labour unions developed and refined it over the years to render the move towards a green economy both environmentally and socially sustainable? The concept of just transition is hotly debated within labour unions and has different interpretations, and hence different strategies. The last section assesses these interpretations by means of a normative framework, which seeks to fuse political economy and political ecology. Empirically, we add to the growing literature on labour environmentalism, as well as transitions more generally. Analytically, our goal is to place the various approaches to a “just transition” within a heuristic framework of environmental justice that is explicit about power relations when demanding justice, two themes central to this special issue.

The implementation of resource management strategies aimed at reducing the impacts of the anthropogenic activities system requires a comprehensive approach to evaluate on the whole the environmental burdens of productive processes and to identify the best recovery strategies from both an environmental and an economic point of view. In this framework, an analytical methodology based on the integration of Life Cycle Assessment (LCA), ExternE and Comprehensive Analysis was developed to perform an in-depth investigation of energy systems. The LCA methodology, largely utilised by the international scientific community for the assessment of the environmental performances of technologies, combined with Comprehensive Analysis allows modelling the overall system of anthropogenic activities, as well as sub-systems, the economic consequences of the whole set of environmental damages. Moreover, internalising external costs into partial equilibrium models, as those utilised by Comprehensive Analysis, can be useful to identify the best paths for implementing technology innovation and strategies aimed to a more sustainable energy supply and use. This paper presents an integrated application of these three methodologies to a local scale case study (the Val D'Agri area in Basilicata, Southern Italy), aimed to better characterise the environmental impacts of the energy system, with particular reference to extraction activities. The innovative methodological approach utilised takes advantage from the strength points of each methodology with an added value coming from their integration as emphasised by the main results obtained by the scenario analysis.

Despite the availability of extensive literature on the benefits and optimization of integrated thermal-electric grids, the dynamics aspects of their operation are not often investigated and well understood. Combined Heat and Power (CHP) units that simultaneously generate electricity and useful heat are one of the main coupling elements between thermal and electric systems with complex dynamic behavior. This paper describes the effort to develop a dynamic model of a CHP unit that will be adequate for use in studies of integrated thermal-electric grids. The proposed model consists of the combustion engine, heat exchanger, exhaust heat exchanger and an induction generator. The developed model is calibrated using parameters of a CHP unit with the goal to validate the behavior of the model against the hardware testbed with the same CHP unit in the laboratory at the Research Center for Combined Smart Energy Systems (CoSES) of the Technical University of Munich (TUM). The individual components, internal combustion engine, heat exchanger, exhaust heat exchanger and induction generator, are modeled separately in from Modelica library. The water heat exchanger and the exhaust heat exchanger are modelled considering the condensing effect of water.